gnss-nmea-generic (on uart bus)

Description

Generic GNSS NMEA receiver

Implement a generic NMEA based GNSS device.

Examples

&uart0 {
        current-speed = <9600>;
        /* ... */
        gnss: gnss-nmea-generic {
                compatible = "gnss-nmea-generic";
        };
};

Properties

Properties not inherited from the base binding file.

Name

Type

Details

enable-gpios

phandle-array

GPIO that enables the receiver when active and puts it into standby
when inactive. The driver asserts this signal on resume and deasserts
it on suspend.

reset-gpios

phandle-array

GPIO that resets the receiver when active. The driver pulses this
signal during initialization. Requires reset-pulse-duration-ms.

reset-pulse-duration-ms

int

Minimum reset pulse duration in milliseconds.

startup-time-ms

int

Time in milliseconds for the receiver to start after asserting enable-gpios.
The driver waits this long before communicating with the receiver.
The default preserves operation without an enable signal. Set this to
the receiver's wake-up time when enable-gpios is used.

Default value: 0