lis2dh.h File Reference

Devicetree binding constants for the ST LIS2DH 3-axis accelerometer. More...

Go to the source code of this file.

Macros
GPIO interrupt configuration
Values for the int1-gpio-config and int2-gpio-config devicetree properties.
#define	LIS2DH_DT_GPIO_INT_EDGE_BOTH   0
	Trigger on both signal edges.
#define	LIS2DH_DT_GPIO_INT_EDGE_RISING   1
	Trigger on the rising edge.
#define	LIS2DH_DT_GPIO_INT_EDGE_FALLING   2
	Trigger on the falling edge.
#define	LIS2DH_DT_GPIO_INT_LEVEL_HIGH   3
	Trigger while the signal is high.
#define	LIS2DH_DT_GPIO_INT_LEVEL_LOW   4
	Trigger while the signal is low.
Any-motion detection mode
Values for the anym-mode devicetree property.
#define	LIS2DH_DT_ANYM_OR_COMBINATION   0
	OR combination of enabled axes.
#define	LIS2DH_DT_ANYM_6D_MOVEMENT   1
	6-direction movement recognition
#define	LIS2DH_DT_ANYM_AND_COMBINATION   2
	AND combination of enabled axes.
#define	LIS2DH_DT_ANYM_6D_POSITION   3
	6-direction position recognition

Detailed Description

Devicetree binding constants for the ST LIS2DH 3-axis accelerometer.