lis2du12.h File Reference

Devicetree binding constants for the ST LIS2DU12 accelerometer. More...

Go to the source code of this file.

Macros
Accelerometer full-scale range
Values for the accel-range devicetree property.
#define	LIS2DU12_DT_FS_2G   0
	±2 g
#define	LIS2DU12_DT_FS_4G   1
	±4 g
#define	LIS2DU12_DT_FS_8G   2
	±8 g
#define	LIS2DU12_DT_FS_16G   3
	±16 g
Accelerometer output data rate
Values for the accel-odr devicetree property. ULP: ultra-low-power mode.
#define	LIS2DU12_DT_ODR_OFF   0x00
	Power-down.
#define	LIS2DU12_DT_ODR_AT_1Hz6_ULP   0x01
	1.6 Hz (ULP)
#define	LIS2DU12_DT_ODR_AT_3Hz_ULP   0x02
	3 Hz (ULP)
#define	LIS2DU12_DT_ODR_AT_6Hz_ULP   0x03
	6 Hz (ULP)
#define	LIS2DU12_DT_ODR_AT_6Hz   0x04
	6 Hz (normal)
#define	LIS2DU12_DT_ODR_AT_12Hz   0x05
	12.5 Hz (normal)
#define	LIS2DU12_DT_ODR_AT_25Hz   0x06
	25 Hz (normal)
#define	LIS2DU12_DT_ODR_AT_50Hz   0x07
	50 Hz (normal)
#define	LIS2DU12_DT_ODR_AT_100Hz   0x08
	100 Hz (normal)
#define	LIS2DU12_DT_ODR_AT_200Hz   0x09
	200 Hz (normal)
#define	LIS2DU12_DT_ODR_AT_400Hz   0x0a
	400 Hz (normal)
#define	LIS2DU12_DT_ODR_AT_800Hz   0x0b
	800 Hz (normal)
#define	LIS2DU12_DT_ODR_TRIG_PIN   0x0e
	Single-shot, high latency, via INT2.
#define	LIS2DU12_DT_ODR_TRIG_SW   0x0f
	Single-shot, high latency, via bus.

Detailed Description

Devicetree binding constants for the ST LIS2DU12 accelerometer.