Basic Audio Profile (BAP) Broadcast Audio Assistant
Overview
Application demonstrating the BAP Broadcast Assistant functionality.
The sample will automatically try to connect to a device in the BAP Scan Delegator role (advertising support for the Broadcast Audio Scan Service (BASS)). It will then search for a broadcast source and (if found) add the broadcast ID to the BAP Scan Delegator.
Practical use of this sample requires a sink (e.g. the BAP Broadcast Audio Sink sample or a set of BAP Broadcast capable earbuds) and a source (e.g. the BAP Broadcast Audio Source sample).
This sample can be found under samples/bluetooth/bap_broadcast_assistant in the Zephyr tree.
Check the Bluetooth samples for general information.
Requirements
BlueZ running on the host, or
A board with Bluetooth Low Energy 5.2 support
Broadcast Audio Source and Sink devices
Building and Running
The application will act as a broadcast assistant with optionally preconfigured filtering of broadcast sink and broadcast source names. By default, the application will search for and connect to the first broadcast audio sink found (advertising PACS and BASS UUIDs) and then search for and select the first broadcast audio source found (advertising a broadcast ID).
Filter these by modifying the following configs:
CONFIG_SELECT_SINK_NAME: Substring of BT name of the sink.
and
CONFIG_SELECT_SOURCE_NAME: Substring of BT name or broadcast name of the source.
Building for an nrf52840dk
# From the root of the zephyr repository
west build -b nrf52840dk/nrf52840 samples/bluetooth/bap_broadcast_assistant/