adi,max32-adc

Note

An implementation of a driver matching this compatible is available in drivers/adc/adc_max32.c.

Description

ADI MAX32 ADC

Properties

Top level properties

These property descriptions apply to “adi,max32-adc” nodes themselves. This page also describes child node properties in the following sections.

Properties not inherited from the base binding file.

Name	Type	Details
`pinctrl-0`	`phandles`	Pin configuration/s for the first state. Content is specific to the selected pin controller driver implementation. This property is required.
`pinctrl-names`	`string-array`	Names for the provided states. The number of names needs to match the number of states. This property is required.
`channel-count`	`int`	The maximum channels supported on each unit. This property is required.
`vref-mv`	`int`	Indicates the reference voltage of the ADC in mV (on the target board). This property is required.
`resolution`	`int`	Indicates the resolution supported by the ADC instance. This property is required.
`clock-source`	`int`	Clock source to be used by the ADC peripheral. The following options are available: - 0: "ADI_MAX32_PRPH_CLK_SRC_PCLK" Peripheral clock - 1: "ADI_MAX32_PRPH_CLK_SRC_EXTCLK" External Clock - 2: "ADI_MAX32_PRPH_CLK_SRC_IBRO" Internal Baud Rate Oscillator - 3: "ADI_MAX32_PRPH_CLK_SRC_ERFO" External Radio Frequency Oscillator The target device might not support every option please take a look on target device user guide This property is required. Legal values: `0`, `1`, `2`, `3`
`clock-divider`	`int`	The clock divider divides the ADC source clock to set the ADC clock frequency as follows: F_sar_clk = F_clock_source / clock divider This property is required. Legal values: `1`, `2`, `4`, `8`, `16`
`track-count`	`int`	The number of cycles to add to the minimum track time. This property is required.
`idle-count`	`int`	The number of cycles to add to the minimum hold time. This property is required.
`#io-channel-cells`	`int`	This property is required. Constant value: `1`
`pinctrl-1`	`phandles`	Pin configuration/s for the second state. See pinctrl-0.
`pinctrl-2`	`phandles`	Pin configuration/s for the third state. See pinctrl-0.
`pinctrl-3`	`phandles`	Pin configuration/s for the fourth state. See pinctrl-0.
`pinctrl-4`	`phandles`	Pin configuration/s for the fifth state. See pinctrl-0.

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “adi,max32-adc” compatible.

Name	Type	Details
`reg`	`array`	register space This property is required. See Important properties for more information.
`interrupts`	`array`	interrupts for device This property is required. See Important properties for more information.
`clocks`	`phandle-array`	Clock gate information This property is required.
`#address-cells`	`int`	number of address cells in reg property Constant value: `1`
`#size-cells`	`int`	number of size cells in reg property
`status`	`string`	indicates the operational status of a device Legal values: `'ok'`, `'okay'`, `'disabled'`, `'reserved'`, `'fail'`, `'fail-sss'` See Important properties for more information.
`compatible`	`string-array`	compatible strings This property is required. See Important properties for more information.
`reg-names`	`string-array`	name of each register space
`interrupts-extended`	`compound`	extended interrupt specifier for device
`interrupt-names`	`string-array`	name of each interrupt
`interrupt-parent`	`phandle`	phandle to interrupt controller node
`label`	`string`	Human readable string describing the device (used as device_get_binding() argument) See Important properties for more information. This property is deprecated.
`clock-names`	`string-array`	name of each clock
`dmas`	`phandle-array`	DMA channels specifiers
`dma-names`	`string-array`	Provided names of DMA channel specifiers
`io-channels`	`phandle-array`	IO channels specifiers
`io-channel-names`	`string-array`	Provided names of IO channel specifiers
`mboxes`	`phandle-array`	mailbox / IPM channels specifiers
`mbox-names`	`string-array`	Provided names of mailbox / IPM channel specifiers
`power-domains`	`phandle-array`	Power domain specifiers
`power-domain-names`	`string-array`	Provided names of power domain specifiers
`#power-domain-cells`	`int`	Number of cells in power-domains property
`zephyr,deferred-init`	`boolean`	Do not initialize device automatically on boot. Device should be manually initialized using device_init().
`wakeup-source`	`boolean`	Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary.
`zephyr,pm-device-runtime-auto`	`boolean`	Automatically configure the device for runtime power management after the init function runs.
`zephyr,disabling-power-states`	`phandles`	List of power states that will disable this device power.

Child node properties

Name	Type	Details
`reg`	`array`	Channel identifier. This property is required. See Important properties for more information.
`zephyr,gain`	`string`	Gain selection: - ADC_GAIN_1_6: x 1/6 - ADC_GAIN_1_5: x 1/5 - ADC_GAIN_1_4: x 1/4 - ADC_GAIN_1_3: x 1/3 - ADC_GAIN_2_5: x 2/5 - ADC_GAIN_1_2: x 1/2 - ADC_GAIN_2_3: x 2/3 - ADC_GAIN_4_5: x 4/5 - ADC_GAIN_1: x 1 - ADC_GAIN_2: x 2 - ADC_GAIN_3: x 3 - ADC_GAIN_4: x 4 - ADC_GAIN_6: x 6 - ADC_GAIN_8: x 8 - ADC_GAIN_12: x 12 - ADC_GAIN_16: x 16 - ADC_GAIN_24: x 24 - ADC_GAIN_32: x 32 - ADC_GAIN_64: x 64 - ADC_GAIN_128: x 128 This property is required. Legal values: `'ADC_GAIN_1_6'`, `'ADC_GAIN_1_5'`, `'ADC_GAIN_1_4'`, `'ADC_GAIN_1_3'`, `'ADC_GAIN_2_5'`, `'ADC_GAIN_1_2'`, `'ADC_GAIN_2_3'`, `'ADC_GAIN_4_5'`, `'ADC_GAIN_1'`, `'ADC_GAIN_2'`, `'ADC_GAIN_3'`, `'ADC_GAIN_4'`, `'ADC_GAIN_6'`, `'ADC_GAIN_8'`, `'ADC_GAIN_12'`, `'ADC_GAIN_16'`, `'ADC_GAIN_24'`, `'ADC_GAIN_32'`, `'ADC_GAIN_64'`, `'ADC_GAIN_128'`
`zephyr,reference`	`string`	Reference selection: - ADC_REF_VDD_1: VDD - ADC_REF_VDD_1_2: VDD/2 - ADC_REF_VDD_1_3: VDD/3 - ADC_REF_VDD_1_4: VDD/4 - ADC_REF_INTERNAL: Internal - ADC_REF_EXTERNAL0: External, input 0 - ADC_REF_EXTERNAL1: External, input 1 This property is required. Legal values: `'ADC_REF_VDD_1'`, `'ADC_REF_VDD_1_2'`, `'ADC_REF_VDD_1_3'`, `'ADC_REF_VDD_1_4'`, `'ADC_REF_INTERNAL'`, `'ADC_REF_EXTERNAL0'`, `'ADC_REF_EXTERNAL1'`
`zephyr,vref-mv`	`int`	This property can be used to specify the voltage (in millivolts) of the reference selected for this channel, so that applications can get that value if needed for some calculations. For the internal reference, the voltage can be usually obtained with a dedicated ADC API call, so there is no need to use this property in that case, but for other references this property can be useful.
`zephyr,acquisition-time`	`int`	Acquisition time. Use the ADC_ACQ_TIME macro to compose the value for this property or pass ADC_ACQ_TIME_DEFAULT to use the default setting for a given hardware (e.g. when the hardware does not allow to configure the acquisition time). This property is required.
`zephyr,differential`	`boolean`	When set, selects differential input mode for the channel. Otherwise, single-ended mode is used unless the zephyr,input-negative property is specified, in which case the differential mode is selected implicitly.
`zephyr,input-positive`	`int`	Positive ADC input. Used only for drivers that select the ADC_CONFIGURABLE_INPUTS Kconfig option.
`zephyr,input-negative`	`int`	Negative ADC input. Used only for drivers that select the ADC_CONFIGURABLE_INPUTS Kconfig option. When specified, implies the differential input mode for the channel.
`zephyr,resolution`	`int`	ADC resolution to be used for the channel.
`zephyr,oversampling`	`int`	Oversampling setting to be used for the channel. When specified, each sample is averaged from 2^N conversion results (where N is the provided value).
`zephyr,current-source-pin`	`uint8-array`	Output pin selection for the current sources. The actual interpretation depends on the driver. This is used only for drivers which select the ADC_CONFIGURABLE_EXCITATION_CURRENT_SOURCE_PIN Kconfig option.
`zephyr,vbias-pins`	`int`	Output pin selection for the bias voltage. The actual interpretation depends on the driver. This is used only for drivers which select the ADC_CONFIGURABLE_VBIAS_PIN Kconfig option.

Specifier cell names

io-channel cells: input