nordic,nrf-uicr
Vendor: Nordic Semiconductor
Description
Nordic UICR (User Information Configuration Registers)
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
---|---|---|
|
|
When enabled this property will configure pins dedicated to NFCT
peripheral as regular GPIOs.
NFC pins in nRF52 series: P0.09 and P0.10
NFC pins in nRF5340: P0.02 and P0.03
This setting, once applied, can only be unset by erasing the UICR
registers. Refer to the reference manual for more details.
|
|
|
When enabled, this property will configure the reset GPIO as nRESET.
nRESET pin in nRF52805/52810/52811/52832 series: P0.21
nRESET pin in nRF52820/52833/52840 series: P0.18
This setting, once applied, can only be unset by erasing the UICR
registers. Refer to the reference manual for more details.
|
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “nordic,nrf-uicr” compatible.
Name |
Type |
Details |
---|---|---|
|
|
register space
This property is required. See Important properties for more information. |
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
No description provided for this label
See Important properties for more information. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|