litex,clk
Vendor: LiteX SoC builder
Description
LiteX Mixed Mode Clock Manager
Common clock driver with MMCM unit for dynamic reconfiguration
of up to 7 clock outputs with ability to change frequency, duty
cycle and phase offset
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
---|---|---|
|
|
Number of items to expect in a Clock specifier
This property is required. Constant value: |
|
|
List of strings of clock output signal names indexed
by the first cell in the clock specifier.
This property is required. |
|
|
Number of ms to wait for MMCM to assert LOCK signal
This property is required. |
|
|
Number of ms to wait for MMCM to assert DRDY signal
This property is required. |
|
|
minimal global divider
This property is required. |
|
|
maximal global divider
This property is required. |
|
|
minimal global multiplier
This property is required. |
|
|
maximal global multiplier
This property is required. |
|
|
minimal frequency after global divider and multiplier
This property is required. |
|
|
maximal frequency after global divider and multiplier
This property is required. |
|
|
minimal clock output divider
This property is required. |
|
|
maximal clock output divider
This property is required. |
|
|
tolerancy for vco frequency
This property is required. |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “litex,clk” compatible.
Name |
Type |
Details |
---|---|---|
|
|
Base address and lengths of the register space
See Important properties for more information. |
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
No description provided for this label
See Important properties for more information. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|
Specifier cell names
clock cells: id