st,stm32f411-plli2s-clock
Vendor: STMicroelectronics
Description
STM32F411 PLL I2S node binding:
Fully configurable I2S dedicated PLL.
1 output clocks supported, the frequency can be computed with the following formula:
f(PLLI2S_R) = f(VCO clock) / PLLI2S R --> PLLI2S
with f(VCO clock) = f(PLL I2S clock input) × (PLLI2S N / PLLI2S M)
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
---|---|---|
|
|
Division factor for the PLL input clock
Valid range: 2 - 63
This property is required. |
|
|
Number of items to expect in a Clock specifier
This property is required. |
|
|
PLLI2S multiplication factor for VCO
Valid range may vary between parts: 50 - 432 , 192 - 432
This property is required. |
|
|
PLLI2S division factor for I2S Clocks
This property is required. Legal values: |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “st,stm32f411-plli2s-clock” compatible.
Name |
Type |
Details |
---|---|---|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
No description provided for this label
See Important properties for more information. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|