espressif,xtensa-lx6
Vendor: Espressif Systems
Description
Espressif Xtensa CPU
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
Defines the CPU clock source, each corresponding to different frequencies:
- 0: ESP32_CPU_CLK_SRC_XTAL - Uses the external crystal clock typically at 40 MHz.
- 1: ESP32_CPU_CLK_SRC_PLL - Utilizes an internal PLL which operates at either
320 MHz or 480 MHz.
- 2: ESP32_CPU_CLK_SRC_RC_FAST - Employs an internal fast RC oscillator with
frequency of 17.5 MHz. 8 MHz for ESP32S2.
- 3: APLL_CLK - 16 Mhz ~ 128 MHz
This property is required. Legal values: |
|
|
Value of the external XTAL connected to ESP32.
This property is required. Legal values: |
|
|
Clock frequency in Hz
|
|
|
List of power management states supported by this cpu
|
|
|
i-cache line size
|
|
|
d-cache line size
|
|
|
Enable method for cpu, either it is "psci" or "spin-table"
|
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “espressif,xtensa-lx6” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
No description provided for this label
See Important properties for more information. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|