raydium,rm67162 (on mipi-dsi bus)

Description

Raydium RM67162 display controller on MIPI DSI bus

The Raydium RM67162 is a 16.7M colors OLED controller
with a maximum 480RGBx480 resolution.

Properties

Properties not inherited from the base binding file.

Name

Type

Details

reset-gpios

phandle-array

The RESETn pin is asserted to disable the sensor causing a hard
reset.  The sensor receives this as an active-low signal.

bl-gpios

phandle-array

The BLn pin is asserted to control the backlight of the panel.
The sensor receives this as an active-high signal.

te-gpios

phandle-array

The tearing effect pin is asserted by the controller at a display
VSYNC interval. This permits the controller to send new display
data during a VSYNC interval, removing tearing.

data-lanes

array

Number of data lanes.

This property is required.

pixel-format

int

Pixel format. Available formats in dt-bindings/mipi_dsi/mipi_dsi.h.

This property is required.

init-sequence

string

Manufacturer settings written to the controller at initialization.
They come from the panel vendor and differ between panels.

- g1120b0mipi: 400x392 panel of the G1120B0MIPI module
- e1918am3.a: 1.91" 240x536 E1918AM3.A panel, used on the LilyGO
  T-Display S3 AMOLED boards

Default value: g1120b0mipi

Legal values: g1120b0mipi, e1918am3.a

rotation

int

Initial display rotation (clockwise) in degrees. The width and height
properties describe the panel before this rotation is applied.

Default value: 0

Legal values: 0, 90, 180, 270

height

int

Height of the panel driven by the controller, with the units in pixels.

This property is required.

width

int

Width of the panel driven by the controller, with the units in pixels.

This property is required.