gd,gd32f527-flash-controller

Description

GD32F527 flash controller.

The main flash starts at 0x08000000 and holds Bank0 and, on dual-bank
parts, Bank1 right after it (512KB, 1MB, 2MB or 4MB in total). Parts
with the extended Bank1_Ex have it at the fixed address 0x08400000
(up to 3584KB), which is not contiguous with the smaller main flash
layouts. All banks are erased by 4KB page and programmed in 64-bit
double-words. Bank swapping through SYSCFG FMC_SWP is not supported.

The main flash is a "gd,gd32-nv-flash" child node that also carries
"soc-nv-flash". Bank1_Ex, when present, is a "gd,gd32-nv-flash" child
node without "soc-nv-flash", and the driver exposes it as its own flash
device. Both must use write-block-size = <8>.

Properties

Properties not inherited from the base binding file.

(None)