atmel-xplained-header
Vendor: Generic or vendor-independent
Description
GPIO pins exposed on Atmel Xplained headers.
The Xplained layout provide a standard 10 pin header. A board can have
one or more headers and can share pins. This connector was developed to
match with Atmel AVR XMEGA devices GPIO port plus power signals. The Atmel
Xplained Pro standard connector keep compatibility with this header and it
can be defined on every board with an Xplained Pro Connector extension and
every pin can be defined as general purpose GPIO.
The AVR XMEGA port was designed as:
Signal Main Function
Px0 SDA
Px1 SCL
Px2 RX
Px3 TX
Px4 SS
Px5 MOSI
Px6 MISO
Px7 SCK
GND
VDD
Documentation:
https://www.microchip.com/development-tools/xplained-boards
http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-42091-Atmel-Xplained-Pro-Hardware-Development-Kit_User%20Guide.pdf
This binding provides a nexus mapping for 10 pins where pins are disposed
to have a even and odd column:
Connector
Bind Pin Name Pin Pin Pin Name Bind
0 I2C(SDA) 1 2 I2C(SCL) 1
2 UART(RX) 3 4 UART(TX) 3
4 SPI(CS0) 5 6 SPI(MOSI) 5
6 SPI(MISO) 7 8 SPI(SCK) 7
GND 9 10 VDD(+3.3V)
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
This property is required. |
|
|
|
|
|
|
|
|
Number of items to expect in a GPIO specifier
This property is required. |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “atmel-xplained-header” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
No description provided for this label
See Important properties for more information. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|