microbit,edge-connector
Vendor: Micro:bit Educational Foundation
Description
GPIO pins exposed on BBC MicroBit headers.
The edge connector on the micro:bit is used to connect to external
circuits and components.
There are 25 strips/pins including 5 rings for using with 4mm banana
plugs or crocodile clips. 3 of these rings are for general purpose
input and output (GPIO) and are also capable of analog, PWM and touch
sensing, and two are connected to the micro:bit power supply.
The smaller strips spaced at 1.27mm on the edge connector have additional
signals, some of which are used by the micro:bit, and others that are free
for you to use. There are a number of external PCB connectors for purchase
with an 80w 1.27mm pitch that can be used to easily access these extra pins.
Only the pins on the front are connected to signals. The back rings are
connected to the front rings, but the back small strips are unconnected.
Pin assignments can be found at:
https://tech.microbit.org/hardware/edgeconnector/#edge-connector-pins
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
This property is required. |
|
|
|
|
|
|
|
|
Number of items to expect in a GPIO specifier
This property is required. |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “microbit,edge-connector” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
No description provided for this label
See Important properties for more information. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|