raspberrypi-40pins-header
Vendor: Generic or vendor-independent
Description
GPIO pins exposed on Raspberry Pi 40-pin header.
The Raspberry Pi layout provides a 2x20 pins header.
This binding provides a nexus mapping for 28 pins as depicted below.
- 3V3 5V -
0 GPIO2/I2C1_SDA 5V -
1 GPIO3/I2C1_SCL GND -
2 GPIO4 GPIO14/UART0_TXD 3
- GND GPIO15/UART0_RXD 4
5 GPIO17 GPIO18 6
7 GPIO27 GND -
8 GPIO22 GPIO23 9
- 3V3 GPIO24 10
11 GPIO10/SPI0_MOSI GND -
12 GPIO9/SPI0_MISO GPIO25 13
14 GPIO11/SPI0_SCLK GPIO8/SPI0_CE0 15
- GND GPIO7/SPI0_CE1 16
17 ID_SD/I2C0_SDA ID_SC/I2C0_SCL 18
19 GPIO5 GND -
20 GPIO6 GPIO12 21
22 GPIO13 GND -
23 GPIO19 GPIO16 24
25 GPIO26 GPIO20 26
- GND GPIO21 27
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
This property is required. |
|
|
|
|
|
|
|
|
Number of items to expect in a GPIO specifier
This property is required. |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “raspberrypi-40pins-header” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
No description provided for this label
See Important properties for more information. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|