microchip,xec-kbd
Vendor: Microchip Technology Inc.
Note
An implementation of a driver matching this compatible is available in drivers/input/input_xec_kbd.c.
Description
Microchip XEC keyboard matrix controller
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
---|---|---|
|
|
The number of rows in the keyboard matrix.
This property is required. |
|
|
The number of column in the keyboard matrix.
This property is required. |
|
|
Defines the poll period in msecs between between matrix scans, set to 0
to never exit poll mode. Defaults to 5ms if unspecified.
Default value: |
|
|
How long to wait before going from polling back to idle state. Defaults
to 100ms if unspecified.
Default value: |
|
|
Debouncing time for a key press event. Defaults to 10ms if unspecified.
Default value: |
|
|
Debouncing time for a key release event. Defaults to 20ms if unspecified.
Default value: |
|
|
Delay between setting column output and reading the row values. Defaults
to 50us if unspecified.
Default value: |
|
|
Keyboard scanning mask. For each keyboard column, specify which keyboard rows actually exist. Can be used to avoid triggering the ghost detection on non existing keys. No masking by default, any combination is valid.
|
|
|
Ignore the ghost key checking in the driver if the diodes are used
in the matrix hardware.
|
|
|
Pin configuration/s for the first state. Content is specific to the
selected pin controller driver implementation.
|
|
|
Pin configuration/s for the second state. See pinctrl-0.
|
|
|
Pin configuration/s for the third state. See pinctrl-0.
|
|
|
Pin configuration/s for the fourth state. See pinctrl-0.
|
|
|
Pin configuration/s for the fifth state. See pinctrl-0.
|
|
|
Names for the provided states. The number of names needs to match the
number of states.
|
|
|
Array of pairs of GIRQ number and bit position
This property is required. |
|
|
ADC PCR register index and bit position
This property is required. |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “microchip,xec-kbd” compatible.
Name |
Type |
Details |
---|---|---|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
This property is required. See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
This property is required. Constant value: |
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|