st,stm32wb0-gpio-intc
Vendor: STMicroelectronics
Note
An implementation of a driver matching this compatible is available in drivers/interrupt_controller/intc_gpio_stm32wb0.c.
Description
STM32WB0 GPIO Interrupt Controller
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
Number of lines supported by the interrupt controller.
This property is required. |
|
|
Description of the input lines range for each interrupt line supported
by the external interrupt controller. For each line a couple of integers is
provided: the number of the first line of the range start and the length
of the range.
As example:
line-ranges = <0 1>, <1 1>, <2 1>, <3 1>,
<4 1>, <5 5>, <10 6>;
Above property provides event-range for 7 lines.
5 first lines contain one element
6th line starts with input line 5 and contains 5 elements (5 to 9)
7th line starts with inupt line 10 and contains 6 elements (10 to 15)
This property is required. |
|
|
Convey's this node is an interrupt controller
This property is required. |
|
|
Number of items to expect in an interrupt specifier
This property is required. |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “st,stm32wb0-gpio-intc” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
register space
This property is required. See Important properties for more information. |
|
|
interrupts for device
This property is required. See Important properties for more information. |
|
|
name of each interrupt
This property is required. |
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
extended interrupt specifier for device
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|