zephyr,ipc-icbmsg
Vendor: Zephyr-specific binding
Note
An implementation of a driver matching this compatible is available in subsys/ipc/ipc_service/backends/ipc_icbmsg.c.
Description
Inter-core messaging backend with dynamically allocated buffers
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
number of allocable TX blocks
This property is required. |
|
|
number of allocable RX blocks
This property is required. |
|
|
phandle to the shared memory region used for data transmission
This property is required. |
|
|
phandle to the shared memory region used for data reception
This property is required. |
|
|
Data cache alignment. If any side of the communication uses cache on
rx-region/tx-region this property must be the biggest value of the
invalidation or the write-back size for both sides of the communication.
If no side of the communication uses data cache this property could be
safely omitted.
For example:
Side A: no data cache
Side B: 32 Bytes write-back size, 16 Bytes invalidation size
dcache-alignment = <32>; for both
|
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “zephyr,ipc-icbmsg” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
phandle to the MBOX controller (TX and RX are required)
This property is required. |
|
|
MBOX channel names (must be called "tx" and "rx")
This property is required. |
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|