zephyr,sdhc-emul-card (on sd bus)
Description
Zephyr SDHC emulated card peripheral
Emulates SD, SDHC, SDXC, eMMC, or SDIO card personalities.
Must be a child of a "zephyr,sdhc-emul-controller" node.
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
Virtual card personality.
sd - SDSC up to 2 GB
sdhc - SDHC 4-32 GB (default)
sdxc - SDXC above 32 GB
emmc - eMMC 5.1, supports CMD6 EXT_CSD, HS200/HS400
sdio - SDIO-only, triggers function enumeration
Default value: Legal values: |
|
|
Number of blocks in the virtual storage.
Default 131072 blocks = 64 MiB at 512 bytes/block.
Default value: |
|
|
Block size in bytes. The emulator only supports 512-byte blocks.
Any other value is rejected.
Default value: Constant value: |
|
|
CMD index that returns an error for fault injection.
255 disables fault injection.
Default value: |
|
|
If present, the virtual card is inserted at boot.
|
|
|
OCR (Operating Conditions Register) value reported by the emulated
card in response to CMD1 (eMMC) or ACMD41 (SD).
The default 0x00FF8000 sets bits 15-23, advertising every supported
VDD window from 2.7 V to 3.6 V (equivalent to MMC_OCR_VDD27_36FLAG).
Notable bits:
bit 7 - VDD 1.65-1.95 V supported (eMMC only)
bits 15-23 - VDD 2.7-3.6 V windows, one bit per 100 mV step
bit 24 - S18A: card supports switching to 1.8 V signalling
bit 30 - Sector mode for eMMC; for SD cards, CCS is derived
from card-type
bit 31 - Power-up busy status; set by the emulator at
runtime and must not be set here
For SD cards, the emulator sets CCS for "sdhc" and "sdxc" and
clears it for "sd", regardless of bit 30 in this property.
Default value: |
|
|
Number of SDIO functions to emulate (1-7).
Default value: |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “zephyr,sdhc-emul-card” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
This property is required. See Important properties for more information. |