tdk,ntcg163jf103ft1
Vendor: TDK Corporation.
Note
An implementation of a driver matching this compatible is available in drivers/sensor/ntc_thermistor/ntc_thermistor.c.
Description
TDK NTCG163JF103FT1 thermistor
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
The pullup voltage microvoltage in the circuit.
If not specified, it is assumed that the pullup voltage is VDD. Therefore,
the specified ADC IO channel must be configured so that VDD is used as the
reference voltage.
|
|
|
The pullup resistance in the circuit.
|
|
|
The pulldown resistance in the circuit.
|
|
|
Indicates how the thermistor is connected in series with a pull-up and/or
a pull-down resistor. If this flag is NOT specified, the thermistor is
assumed to be connected-ground, which usually means a pull-down resistance
of zero but complex arrangements are possible.
|
|
|
Human readable string describing the sensor. It can be used to
distinguish multiple instances of the same model (e.g., lid accelerometer
vs. base accelerometer in a laptop) to a host operating system.
This property is defined in the Generic Sensor Property Usages of the HID
Usage Tables specification
(https://usb.org/sites/default/files/hut1_3_0.pdf, section 22.5).
|
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “tdk,ntcg163jf103ft1” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
ADC IO channel connected to this NTC thermistor.
This property is required. |
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|