usb-audio-hs
Vendor: Generic or vendor-independent
Description
USB Audio headset specific fields.
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
Default value: Legal values: |
|
|
Type of endpoint synchronization for IN devices.
Default value is Synchronous.
Adaptive is not supported.
Default value: Legal values: |
|
|
Default value: |
|
|
Default value: |
|
|
Default value: Legal values: |
|
|
Default value: |
|
|
Default value: |
|
|
Enable (l) channel.
|
|
|
Enable (r) channel.
|
|
|
Enable (c) channel.
|
|
|
Enable (lfe) channel.
|
|
|
Enable (ls) channel.
|
|
|
Enable (rs) channel.
|
|
|
Enable (lc) channel.
|
|
|
Enable (rc) channel.
|
|
|
Enable (s) channel.
|
|
|
Enable (sl) channel.
|
|
|
Enable (sr) channel.
|
|
|
Enable (t) channel.
|
|
|
Enable (cfg) channel.
|
|
|
Enable Mute feature.
This property is required. |
|
|
Enable Volume feature.
Currently not supported.
|
|
|
Enable Tone Control (Bass, Mid, Treble) feature.
Currently not supported.
|
|
|
Enable Graphic Equalizer feature.
Currently not supported.
|
|
|
Enable Autoamtic Gain Control feature.
Currently not supported.
|
|
|
Enable Delay feature.
Currently not supported.
|
|
|
Enable Bass Boost feature.
Currently not supported.
|
|
|
Enable Loudness feature.
Currently not supported.
|
|
|
Enable (l) channel.
|
|
|
Enable (r) channel.
|
|
|
Enable (c) channel.
|
|
|
Enable (lfe) channel.
|
|
|
Enable (ls) channel.
|
|
|
Enable (rs) channel.
|
|
|
Enable (lc) channel.
|
|
|
Enable (rc) channel.
|
|
|
Enable (s) channel.
|
|
|
Enable (sl) channel.
|
|
|
Enable (sr) channel.
|
|
|
Enable (t) channel.
|
|
|
Enable (cfg) channel.
|
|
|
Enable Mute feature.
This property is required. |
|
|
Enable Volume feature.
|
|
|
Enable Tone Control (Bass, Mid, Treble) feature.
Currently not supported.
|
|
|
Enable Graphic Equalizer feature.
Currently not supported.
|
|
|
Enable Autoamtic Gain Control feature.
Currently not supported.
|
|
|
Enable Delay feature.
Currently not supported.
|
|
|
Enable Bass Boost feature.
Currently not supported.
|
|
|
Enable Loudness feature.
Currently not supported.
|
|
|
attention: this attribute is a signed value.
This attribute represents the maximum volume level.
The range from +127.9961 dB (0x7FFF) down to -127.9961 dB (0x8001).
Valid range: 0 - 0xFFFF
Default value: |
|
|
attention: this attribute is a signed value.
This attribute represents the minimum volume level.
The range from +127.9961 dB (0x7FFF) down to -127.9961 dB (0x8001).
Valid range: 0 - 0xFFFF
Default value: |
|
|
attention: this attribute can only take positive values.
This attribute represents the volume resolution(step).
1 = 1/256 dB or 0.00390625 dB.
0x100(256) = 1dB.
Valid range: 1 - 0x7FFF
Default value: |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “usb-audio-hs” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
No description provided for this label
See Important properties for more information. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|