zephyr,hid-device
Vendor: Zephyr-specific binding
Note
An implementation of a driver matching this compatible is available in subsys/usb/device_next/class/usbd_hid.c.
Description
Bindings for HID device
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
HID device name. When this property is present, a USB device will use it
as the string descriptor of the interface.
|
|
|
This property corresponds to the protocol codes defined in Chapter 4.3
of the HID specification. Only boot devices are required to set one of
the protocols, keyboard or mouse. For non-boot devices, this property is
not required or can be set to none.
- none: Device does not support the boot interface
- keyboard: Device supports boot interface and keyboard protocol
- mouse: Device supports boot interface and mouse protocol
Legal values: |
|
|
The size of the longest input report that the HID device can generate.
This property is used to determine the buffer length used for transfers.
This property is required. |
|
|
Input or output type reports polling period in microseconds. For USB full
speed this could be clamped to 1ms or 255ms depending on the value.
This property is required. |
|
|
The size of the longest output report that the HID device can generate.
When this property is present, a USB device will use out pipe for output
reports, otherwise control pipe will be used for output reports.
|
|
|
Output type reports polling period in microseconds. For USB full
speed this could be clamped to 1ms or 255ms depending on the value.
This option is only effective if the out-report-size property is defined.
|
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “zephyr,hid-device” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
No description provided for this label
See Important properties for more information. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|