lis2dux12.h File Reference

Devicetree binding constants for the ST LIS2DUX12 accelerometer. More...

#include <zephyr/dt-bindings/dt-util.h>

Go to the source code of this file.

Macros
Operating mode
Values for the power-mode devicetree property.
#define	LIS2DUX12_OPER_MODE_POWER_DOWN   0
	Power-down.
#define	LIS2DUX12_OPER_MODE_LOW_POWER   1
	Low-power mode.
#define	LIS2DUX12_OPER_MODE_HIGH_PERFORMANCE   2
	High-performance mode.
#define	LIS2DUX12_OPER_MODE_SINGLE_SHOT   3
	Single-shot mode.
Output data rate options
Values for the odr devicetree property. ULP: ultra-low-power, LP: low-power, HP: high-performance mode.
#define	LIS2DUX12_DT_ODR_OFF   0
	Power-down.
#define	LIS2DUX12_DT_ODR_1Hz_ULP   1
	1 Hz (ULP mode only)
#define	LIS2DUX12_DT_ODR_3Hz_ULP   2
	3 Hz (ULP mode only)
#define	LIS2DUX12_DT_ODR_25Hz_ULP   3
	25 Hz (ULP mode only)
#define	LIS2DUX12_DT_ODR_6Hz   4
	6 Hz (LP or HP mode)
#define	LIS2DUX12_DT_ODR_12Hz5   5
	12.5 Hz (LP or HP mode)
#define	LIS2DUX12_DT_ODR_25Hz   6
	25 Hz (LP or HP mode)
#define	LIS2DUX12_DT_ODR_50Hz   7
	50 Hz (LP or HP mode)
#define	LIS2DUX12_DT_ODR_100Hz   8
	100 Hz (LP or HP mode)
#define	LIS2DUX12_DT_ODR_200Hz   9
	200 Hz (LP or HP mode)
#define	LIS2DUX12_DT_ODR_400Hz   10
	400 Hz (LP or HP mode)
#define	LIS2DUX12_DT_ODR_800Hz   11
	800 Hz (LP or HP mode)
#define	LIS2DUX12_DT_ODR_END   12
	Sentinel, one past the last ODR.
Accelerometer full-scale range
Values for the range devicetree property.
#define	LIS2DUX12_DT_FS_2G   0
	±2 g (0.061 mg/LSB)
#define	LIS2DUX12_DT_FS_4G   1
	±4 g (0.122 mg/LSB)
#define	LIS2DUX12_DT_FS_8G   2
	±8 g (0.244 mg/LSB)
#define	LIS2DUX12_DT_FS_16G   3
	±16 g (0.488 mg/LSB)
Accelerometer FIFO batching data rate
Values for the accel-fifo-batch-rate devicetree property.
#define	LIS2DUX12_DT_BDR_XL_ODR   0x0
	Batched at ODR.
#define	LIS2DUX12_DT_BDR_XL_ODR_DIV_2   0x1
	Batched at ODR / 2.
#define	LIS2DUX12_DT_BDR_XL_ODR_DIV_4   0x2
	Batched at ODR / 4.
#define	LIS2DUX12_DT_BDR_XL_ODR_DIV_8   0x3
	Batched at ODR / 8.
#define	LIS2DUX12_DT_BDR_XL_ODR_DIV_16   0x4
	Batched at ODR / 16.
#define	LIS2DUX12_DT_BDR_XL_ODR_DIV_32   0x5
	Batched at ODR / 32.
#define	LIS2DUX12_DT_BDR_XL_ODR_DIV_64   0x6
	Batched at ODR / 64.
#define	LIS2DUX12_DT_BDR_XL_ODR_OFF   0x7
	Not batched.
Accelerometer FIFO timestamp decimation
Values for the timestamp-fifo-batch-rate devicetree property.
#define	LIS2DUX12_DT_DEC_TS_OFF   0x0
	Timestamp not batched.
#define	LIS2DUX12_DT_DEC_TS_1   0x1
	Decimation by 1.
#define	LIS2DUX12_DT_DEC_TS_8   0x2
	Decimation by 8.
#define	LIS2DUX12_DT_DEC_TS_32   0x3
	Decimation by 32.
FIFO record tags
FIFO record tag values reported in the FIFO data stream.
#define	LIS2DUXXX_FIFO_EMPTY   0x0
	FIFO empty.
#define	LIS2DUXXX_XL_TEMP_TAG   0x2
	Accelerometer and temperature.
#define	LIS2DUXXX_XL_ONLY_2X_TAG   0x3
	Accelerometer only, 2x compressed.
#define	LIS2DUXXX_TIMESTAMP_TAG   0x4
	Timestamp.
#define	LIS2DUXXX_STEP_COUNTER_TAG   0x12
	Step counter.
#define	LIS2DUXXX_MLC_RESULT_TAG   0x1A
	Machine-learning core result.
#define	LIS2DUXXX_MLC_FILTER_TAG   0x1B
	Machine-learning core filter.
#define	LIS2DUXXX_MLC_FEATURE   0x1C
	Machine-learning core feature.
#define	LIS2DUXXX_FSM_RESULT_TAG   0x1D
	Finite-state-machine result.
FIFO modes
FIFO operating modes used by the driver.
#define	LIS2DUXXX_DT_BYPASS_MODE   0x0
	Bypass (FIFO disabled).
#define	LIS2DUXXX_DT_FIFO_MODE   0x1
	FIFO mode.
#define	LIS2DUXXX_DT_STREAM_TO_FIFO_MODE   0x3
	Stream-to-FIFO mode.
#define	LIS2DUXXX_DT_BYPASS_TO_STREAM_MODE   0x4
	Bypass-to-stream mode.
#define	LIS2DUXXX_DT_STREAM_MODE   0x6
	Continuous stream mode.
#define	LIS2DUXXX_DT_BYPASS_TO_FIFO_MODE   0x7
	Bypass-to-FIFO mode.
#define	LIS2DUXXX_DT_FIFO_OFF   0x8
	FIFO off.
Register addresses
Register addresses used by the driver.
#define	LIS2DUXXX_DT_FIFO_CTRL   0x15U
	FIFO_CTRL register.
#define	LIS2DUXXX_DT_STATUS   0x25U
	STATUS register.
#define	LIS2DUXXX_DT_FIFO_STATUS1   0x26U
	FIFO_STATUS1 register.
#define	LIS2DUXXX_DT_OUTX_L   0x28U
	OUTX_L output register.
#define	LIS2DUXXX_DT_FIFO_DATA_OUT_TAG   0x40U
	FIFO_DATA_OUT_TAG register.

Detailed Description

Devicetree binding constants for the ST LIS2DUX12 accelerometer.