|
Zephyr API Documentation 4.5.99
A Scalable Open Source RTOS
|
Spanning tree state of a bridge. More...
#include <zephyr/net/ethernet_bridge_stp.h>
Data Fields | |
| bool | enabled |
| The protocol runs on the bridge. | |
| enum eth_bridge_stp_version | version |
| Force Protocol Version. | |
| uint64_t | bridge_id |
| Bridge Identifier of this bridge. | |
| uint64_t | root_id |
| Bridge Identifier of the root bridge. | |
| uint32_t | root_path_cost |
| Cost of the path to the root bridge. | |
| struct net_if * | root_port |
| Root Port, NULL if this bridge is the root. | |
| uint8_t | max_age |
| Max Age in use, in seconds. | |
| uint8_t | forward_delay |
| Forward Delay in use, in seconds. | |
| uint8_t | bridge_max_age |
| Bridge Max Age, in seconds. | |
| uint8_t | bridge_forward_delay |
| Bridge Forward Delay, in seconds. | |
| uint8_t | tx_hold_count |
| Transmit Hold Count. | |
| bool | topology_change |
| A topology change is being propagated (IEEE Std 802.1Q-2014 12.8.1.1.3). | |
| uint32_t | topology_change_count |
| Topology changes since the bridge was initialized. | |
| uint32_t | time_since_topology_change |
| Seconds since the last topology change. | |
Spanning tree state of a bridge.
| uint8_t eth_bridge_stp_status::bridge_forward_delay |
Bridge Forward Delay, in seconds.
| uint64_t eth_bridge_stp_status::bridge_id |
Bridge Identifier of this bridge.
| uint8_t eth_bridge_stp_status::bridge_max_age |
Bridge Max Age, in seconds.
| bool eth_bridge_stp_status::enabled |
The protocol runs on the bridge.
| uint8_t eth_bridge_stp_status::forward_delay |
Forward Delay in use, in seconds.
| uint8_t eth_bridge_stp_status::max_age |
Max Age in use, in seconds.
| uint64_t eth_bridge_stp_status::root_id |
Bridge Identifier of the root bridge.
| uint32_t eth_bridge_stp_status::root_path_cost |
Cost of the path to the root bridge.
| struct net_if* eth_bridge_stp_status::root_port |
Root Port, NULL if this bridge is the root.
| uint32_t eth_bridge_stp_status::time_since_topology_change |
Seconds since the last topology change.
| bool eth_bridge_stp_status::topology_change |
A topology change is being propagated (IEEE Std 802.1Q-2014 12.8.1.1.3).
| uint32_t eth_bridge_stp_status::topology_change_count |
Topology changes since the bridge was initialized.
| uint8_t eth_bridge_stp_status::tx_hold_count |
Transmit Hold Count.
| enum eth_bridge_stp_version eth_bridge_stp_status::version |
Force Protocol Version.