CONFIG_2ND_LEVEL_INTERRUPTS |
Second-level interrupt support |
CONFIG_2ND_LVL_INTR_00_OFFSET |
Level 1 IRQ line for 2ND level aggregator 0 |
CONFIG_2ND_LVL_INTR_01_OFFSET |
Level 1 IRQ line for 2ND level aggregator 1 |
CONFIG_2ND_LVL_INTR_02_OFFSET |
Level 1 IRQ line for 2ND level aggregator 2 |
CONFIG_2ND_LVL_INTR_03_OFFSET |
Level 1 IRQ line for 2ND level aggregator 3 |
CONFIG_2ND_LVL_INTR_04_OFFSET |
Level 1 IRQ line for 2ND level aggregator 4 |
CONFIG_2ND_LVL_INTR_05_OFFSET |
Level 1 IRQ line for 2ND level aggregator 5 |
CONFIG_2ND_LVL_INTR_06_OFFSET |
Level 1 IRQ line for 2ND level aggregator 6 |
CONFIG_2ND_LVL_INTR_07_OFFSET |
Level 1 IRQ line for 2ND level aggregator 7 |
CONFIG_2ND_LVL_ISR_TBL_OFFSET |
Offset in _sw_isr_table for level 2 interrupts |
CONFIG_3RD_LEVEL_INTERRUPTS |
Third-level interrupt support |
CONFIG_3RD_LVL_INTR_00_OFFSET |
Level 2 IRQ line for 3RD level aggregator 0 |
CONFIG_3RD_LVL_INTR_01_OFFSET |
Level 2 IRQ line for 3RD level aggregator 1 |
CONFIG_3RD_LVL_INTR_02_OFFSET |
Level 2 IRQ line for 3RD level aggregator 2 |
CONFIG_3RD_LVL_INTR_03_OFFSET |
Level 2 IRQ line for 3RD level aggregator 3 |
CONFIG_3RD_LVL_INTR_04_OFFSET |
Level 2 IRQ line for 3RD level aggregator 4 |
CONFIG_3RD_LVL_INTR_05_OFFSET |
Level 2 IRQ line for 3RD level aggregator 5 |
CONFIG_3RD_LVL_INTR_06_OFFSET |
Level 2 IRQ line for 3RD level aggregator 6 |
CONFIG_3RD_LVL_INTR_07_OFFSET |
Level 2 IRQ line for 3RD level aggregator 7 |
CONFIG_3RD_LVL_ISR_TBL_OFFSET |
Offset in _sw_isr_table for level 3 interrupts |
CONFIG_ADC |
ADC drivers |
CONFIG_ADC_0 |
Enable ADC 0 |
CONFIG_ADC_0_IRQ_PRI |
|
CONFIG_ADC_1 |
Enable ADC 1 |
CONFIG_ADC_ASYNC |
Enable asynchronous call support |
CONFIG_ADC_CONFIGURABLE_INPUTS |
|
CONFIG_ADC_INIT_PRIORITY |
Init priority |
CONFIG_ADC_INTEL_QUARK_D2000 |
ADC Driver for Intel Quark D2000 |
CONFIG_ADC_INTEL_QUARK_D2000_CALIBRATION |
Enable Calibration |
CONFIG_ADC_INTEL_QUARK_D2000_CLOCK_RATIO |
Clock Ratio |
CONFIG_ADC_INTEL_QUARK_SE_C1000_SS |
ADC Driver for Intel Quark SE C1000 Sensor Subsystem |
CONFIG_ADC_INTEL_QUARK_SE_C1000_SS_CALIBRATION |
Enable Calibration |
CONFIG_ADC_INTEL_QUARK_SE_C1000_SS_CLOCK_RATIO |
Clock Ratio |
CONFIG_ADC_INTEL_QUARK_SE_C1000_SS_FALLING_EDGE |
Falling Edge |
CONFIG_ADC_INTEL_QUARK_SE_C1000_SS_PARALLEL |
Parallel |
CONFIG_ADC_INTEL_QUARK_SE_C1000_SS_RISING_EDGE |
Rising Edge |
CONFIG_ADC_INTEL_QUARK_SE_C1000_SS_SERIAL |
Serial |
CONFIG_ADC_INTEL_QUARK_SE_C1000_SS_SERIAL_DELAY |
Serial Delay |
CONFIG_ADC_LOG_LEVEL |
|
CONFIG_ADC_LOG_LEVEL_DBG |
Debug |
CONFIG_ADC_LOG_LEVEL_ERR |
Error |
CONFIG_ADC_LOG_LEVEL_INF |
Info |
CONFIG_ADC_LOG_LEVEL_OFF |
Off |
CONFIG_ADC_LOG_LEVEL_WRN |
Warning |
CONFIG_ADC_MCUX_ADC16 |
MCUX ADC16 driver |
CONFIG_ADC_MCUX_ADC16_CLK_DIV_RATIO_1 |
Divide ratio is 1 |
CONFIG_ADC_MCUX_ADC16_CLK_DIV_RATIO_2 |
Divide ratio is 2 |
CONFIG_ADC_MCUX_ADC16_CLK_DIV_RATIO_4 |
Divide ratio is 4 |
CONFIG_ADC_MCUX_ADC16_CLK_DIV_RATIO_8 |
Divide ratio is 8 |
CONFIG_ADC_MCUX_ADC16_VREF_ALTERNATE |
Alternate reference pair |
CONFIG_ADC_MCUX_ADC16_VREF_DEFAULT |
Default voltage reference pair V_REFH and V_REFL |
CONFIG_ADC_NRFX_ADC |
nRF ADC nrfx driver |
CONFIG_ADC_NRFX_ADC_CHANNEL_COUNT |
Number of ADC channels |
CONFIG_ADC_NRFX_SAADC |
nRF SAADC nrfx driver |
CONFIG_ADC_SAM_AFEC |
SAM ADC Driver |
CONFIG_ADT7420 |
ADT7420 Temperature Sensor |
CONFIG_ADT7420_TEMP_CRIT |
Critical overtemperature in °C |
CONFIG_ADT7420_TEMP_HYST |
Temperature hysteresis in °C |
CONFIG_ADT7420_THREAD_PRIORITY |
Thread priority |
CONFIG_ADT7420_THREAD_STACK_SIZE |
Thread stack size |
CONFIG_ADT7420_TRIGGER |
|
CONFIG_ADT7420_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_ADT7420_TRIGGER_NONE |
No trigger |
CONFIG_ADT7420_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_ADXL362 |
ADXL362 sensor |
CONFIG_ADXL362_ACCEL_ODR_100 |
100 Hz |
CONFIG_ADXL362_ACCEL_ODR_12_5 |
12.5 Hz |
CONFIG_ADXL362_ACCEL_ODR_200 |
200 Hz |
CONFIG_ADXL362_ACCEL_ODR_25 |
25 Hz |
CONFIG_ADXL362_ACCEL_ODR_400 |
400 Hz |
CONFIG_ADXL362_ACCEL_ODR_50 |
50 Hz |
CONFIG_ADXL362_ACCEL_ODR_RUNTIME |
Set at runtime. |
CONFIG_ADXL362_ACCEL_RANGE_2G |
2G |
CONFIG_ADXL362_ACCEL_RANGE_4G |
4G |
CONFIG_ADXL362_ACCEL_RANGE_8G |
8G |
CONFIG_ADXL362_ACCEL_RANGE_RUNTIME |
Set at runtime. |
CONFIG_ADXL372 |
ADXL372 Three Axis High-g I2C/SPI accelerometer |
CONFIG_ADXL372_ACTIVITY_THRESHOLD |
Activity threshold in mg |
CONFIG_ADXL372_ACTIVITY_TIME |
Activity time |
CONFIG_ADXL372_BW_1600HZ |
1600 Hz |
CONFIG_ADXL372_BW_200HZ |
200 Hz |
CONFIG_ADXL372_BW_3200HZ |
3200 Hz |
CONFIG_ADXL372_BW_400HZ |
400 Hz |
CONFIG_ADXL372_BW_800HZ |
800 Hz |
CONFIG_ADXL372_HPF_CORNER0 |
ODR/210 |
CONFIG_ADXL372_HPF_CORNER1 |
ODR/411 |
CONFIG_ADXL372_HPF_CORNER2 |
ODR/812 |
CONFIG_ADXL372_HPF_CORNER3 |
ODR/1616 |
CONFIG_ADXL372_HPF_DISABLE |
Disabled |
CONFIG_ADXL372_I2C |
I2C Interface |
CONFIG_ADXL372_INACTIVITY_THRESHOLD |
In-activity threshold in mg |
CONFIG_ADXL372_INACTIVITY_TIME |
In-activity time |
CONFIG_ADXL372_LPF_DISABLE |
Disabled |
CONFIG_ADXL372_MEASUREMENT_MODE |
Measurement Mode |
CONFIG_ADXL372_ODR_1600HZ |
1600 Hz |
CONFIG_ADXL372_ODR_3200HZ |
3200 Hz |
CONFIG_ADXL372_ODR_400HZ |
400 Hz |
CONFIG_ADXL372_ODR_6400HZ |
6400 Hz |
CONFIG_ADXL372_ODR_800HZ |
800 Hz |
CONFIG_ADXL372_PEAK_DETECT_MODE |
Max Peak detect mode |
CONFIG_ADXL372_REFERENCED_ACTIVITY_DETECTION_MODE |
Use referenced activity/in-activity detection |
CONFIG_ADXL372_SPI |
SPI Interface |
CONFIG_ADXL372_THREAD_PRIORITY |
Thread priority |
CONFIG_ADXL372_THREAD_STACK_SIZE |
Thread stack size |
CONFIG_ADXL372_TRIGGER |
|
CONFIG_ADXL372_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_ADXL372_TRIGGER_NONE |
No trigger |
CONFIG_ADXL372_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_AHB_DIV |
AHB clock divider |
CONFIG_AIO_COMPARATOR |
AIO/Comparator Configuration |
CONFIG_AIO_COMPARATOR_0_IRQ_PRI |
IRQ Priority for AIO/comparator |
CONFIG_AIO_COMPARATOR_0_NAME |
Device name for AIO/comparator |
CONFIG_AIO_COMPARATOR_QMSI |
Enable QMSI AIO/comparator driver |
CONFIG_AK8975 |
AK8975 Magnetometer |
CONFIG_AK8975_I2C_ADDR |
I2C address |
CONFIG_AK8975_I2C_MASTER_DEV_NAME |
I2C master where AK8975 is connected |
CONFIG_AK8975_NAME |
Driver name |
CONFIG_ALTERA_AVALON_I2C |
|
CONFIG_ALTERA_AVALON_MSGDMA |
|
CONFIG_ALTERA_AVALON_PIO |
|
CONFIG_ALTERA_AVALON_QSPI |
|
CONFIG_ALTERA_AVALON_SYSID |
|
CONFIG_ALTERA_AVALON_TIMER |
Altera Avalon Interval Timer |
CONFIG_AMG88XX |
AMG88XX Infrared Thermopile Sensor |
CONFIG_AMG88XX_GPIO_DEV_NAME |
GPIO device |
CONFIG_AMG88XX_GPIO_PIN_NUM |
Interrupt GPIO pin number |
CONFIG_AMG88XX_I2C_ADDR |
I2C address for AMG88XX Sensor |
CONFIG_AMG88XX_I2C_MASTER_DEV_NAME |
I2C master where AMG88XX is connected |
CONFIG_AMG88XX_NAME |
Driver name |
CONFIG_AMG88XX_THREAD_PRIORITY |
Thread priority |
CONFIG_AMG88XX_THREAD_STACK_SIZE |
Thread stack size |
CONFIG_AMG88XX_TRIGGER |
|
CONFIG_AMG88XX_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_AMG88XX_TRIGGER_NONE |
No trigger |
CONFIG_AMG88XX_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_AON_API_REENTRANCY |
AON driver API reentrancy |
CONFIG_AON_COUNTER_QMSI |
AON counter driver |
CONFIG_AON_COUNTER_QMSI_DEV_NAME |
QMSI AON Counter Device Name |
CONFIG_AON_TIMER_IRQ_PRI |
Interrupt priority |
CONFIG_AON_TIMER_QMSI |
AON periodic timer driver |
CONFIG_APA102_STRIP |
APA102 SPI LED strip driver |
CONFIG_APDS9960 |
APDS9960 Sensor |
CONFIG_APDS9960_TRIGGER |
|
CONFIG_APDS9960_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_APDS9960_TRIGGER_NONE |
No trigger |
CONFIG_APPLICATION_DEFINED_SYSCALL |
Scan application folder for any syscall definition |
CONFIG_APPLICATION_INIT_PRIORITY |
Default init priority for application level drivers |
CONFIG_APP_LINK_WITH_FS |
Link ‘app’ with FS |
CONFIG_APP_LINK_WITH_LVGL |
Link ‘app’ with LVGL |
CONFIG_APP_LINK_WITH_MBEDTLS |
Link ‘app’ with MBEDTLS |
CONFIG_APP_LINK_WITH_MCUMGR |
Link ‘app’ with MCUMGR |
CONFIG_ARC |
ARC architecture |
CONFIG_ARCH |
|
CONFIG_ARCH_CACHE_FLUSH_DETECT |
|
CONFIG_ARCH_HAS_CUSTOM_BUSY_WAIT |
|
CONFIG_ARCH_HAS_CUSTOM_SWAP_TO_MAIN |
|
CONFIG_ARCH_HAS_EXECUTABLE_PAGE_BIT |
|
CONFIG_ARCH_HAS_NOCACHE_MEMORY_SUPPORT |
|
CONFIG_ARCH_HAS_RAMFUNC_SUPPORT |
|
CONFIG_ARCH_HAS_STACK_PROTECTION |
|
CONFIG_ARCH_HAS_THREAD_ABORT |
|
CONFIG_ARCH_HAS_TRUSTED_EXECUTION |
|
CONFIG_ARCH_HAS_USERSPACE |
|
CONFIG_ARCH_LOG_LEVEL |
|
CONFIG_ARCH_LOG_LEVEL_DBG |
Debug |
CONFIG_ARCH_LOG_LEVEL_ERR |
Error |
CONFIG_ARCH_LOG_LEVEL_INF |
Info |
CONFIG_ARCH_LOG_LEVEL_OFF |
Off |
CONFIG_ARCH_LOG_LEVEL_WRN |
Warning |
CONFIG_ARCH_POSIX |
POSIX (native) architecture |
CONFIG_ARCH_POSIX_RECOMMENDED_STACK_SIZE |
|
CONFIG_ARCH_POSIX_STOP_ON_FATAL_ERROR |
Terminate execution on fatal errors |
CONFIG_ARCV2_INTERRUPT_UNIT |
ARCv2 Interrupt Unit |
CONFIG_ARCV2_TIMER |
ARC Timer |
CONFIG_ARCV2_TIMER_IRQ_PRIORITY |
ARC timer interrupt priority |
CONFIG_ARC_CORE_MPU |
ARC Core MPU functionalities |
CONFIG_ARC_FIRQ |
FIRQ enable |
CONFIG_ARC_GDB_ENABLE |
Allows the usage of GDB with the ARC processor. |
CONFIG_ARC_HAS_SECURE |
|
CONFIG_ARC_HAS_STACK_CHECKING |
ARC has STACK_CHECKING |
CONFIG_ARC_INIT |
Quark SE ARC Kickoff |
CONFIG_ARC_MPU |
ARC MPU Support |
CONFIG_ARC_MPU_ENABLE |
Enable MPU |
CONFIG_ARC_MPU_VER |
ARC MPU version |
CONFIG_ARC_STACK_CHECKING |
|
CONFIG_ARC_STACK_PROTECTION |
|
CONFIG_ARM |
ARM architecture |
CONFIG_ARMV6_M_ARMV8_M_BASELINE |
|
CONFIG_ARMV7_M_ARMV8_M_FP |
|
CONFIG_ARMV7_M_ARMV8_M_MAINLINE |
|
CONFIG_ARMV8_M_BASELINE |
|
CONFIG_ARMV8_M_DSP |
|
CONFIG_ARMV8_M_MAINLINE |
|
CONFIG_ARMV8_M_SE |
|
CONFIG_ARM_CLOCK_CONTROL_DEV_NAME |
Clock Config Device name |
CONFIG_ARM_DIV |
ARM clock divider |
CONFIG_ARM_ENTRY_VENEERS_LIB_NAME |
Entry Veneers symbol file |
CONFIG_ARM_FIRMWARE_HAS_SECURE_ENTRY_FUNCS |
Secure Firmware has Secure Entry functions |
CONFIG_ARM_MPU |
ARM MPU Support |
CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE |
|
CONFIG_ARM_NONSECURE_FIRMWARE |
|
CONFIG_ARM_NSC_REGION_BASE_ADDRESS |
ARM Non-Secure Callable Region base address |
CONFIG_ARM_SECURE_FIRMWARE |
|
CONFIG_ARM_STACK_PROTECTION |
|
CONFIG_ARM_TRUSTZONE_M |
ARM TrustZone-M support |
CONFIG_ASAN |
Build with address sanitizer |
CONFIG_ASF |
|
CONFIG_ASSERT |
Enable __ASSERT() macro |
CONFIG_ASSERT_LEVEL |
__ASSERT() level |
CONFIG_ATMEL_WINC1500 |
|
CONFIG_ATOMIC_OPERATIONS_BUILTIN |
|
CONFIG_ATOMIC_OPERATIONS_C |
|
CONFIG_ATOMIC_OPERATIONS_CUSTOM |
|
CONFIG_AUDIO |
Support for Audio |
CONFIG_AUDIO_CODEC |
Audio Codec Drivers |
CONFIG_AUDIO_CODEC_INIT_PRIORITY |
Init priority |
CONFIG_AUDIO_CODEC_LOG_LEVEL |
|
CONFIG_AUDIO_CODEC_LOG_LEVEL_DBG |
Debug |
CONFIG_AUDIO_CODEC_LOG_LEVEL_ERR |
Error |
CONFIG_AUDIO_CODEC_LOG_LEVEL_INF |
Info |
CONFIG_AUDIO_CODEC_LOG_LEVEL_OFF |
Off |
CONFIG_AUDIO_CODEC_LOG_LEVEL_WRN |
Warning |
CONFIG_AUDIO_DMIC |
Digital Microphone (Audio) Drivers |
CONFIG_AUDIO_DMIC_INIT_PRIORITY |
Init priority |
CONFIG_AUDIO_DMIC_LOG_LEVEL |
|
CONFIG_AUDIO_DMIC_LOG_LEVEL_DBG |
Debug |
CONFIG_AUDIO_DMIC_LOG_LEVEL_ERR |
Error |
CONFIG_AUDIO_DMIC_LOG_LEVEL_INF |
Info |
CONFIG_AUDIO_DMIC_LOG_LEVEL_OFF |
Off |
CONFIG_AUDIO_DMIC_LOG_LEVEL_WRN |
Warning |
CONFIG_AUDIO_INTEL_DMIC |
Intel digital PDM microphone driver support |
CONFIG_AUDIO_MPXXDTYY |
ST Digital PDM microphone attached to I2S support |
CONFIG_AUDIO_TLV320DAC |
TLV320DAC310x DAC support |
CONFIG_BASE64 |
Enable base64 encoding and decoding |
CONFIG_BATTERY_SENSE |
Enable the battery sense circuit |
CONFIG_BIG_ENDIAN |
|
CONFIG_BLUETOOTH_BULK_EP_MPS |
|
CONFIG_BLUETOOTH_INT_EP_MPS |
|
CONFIG_BMA280 |
BMA280 Three Axis Accelerometer Family |
CONFIG_BMA280_CHIP_BMA280 |
BMA280 |
CONFIG_BMA280_CHIP_BMC150_ACCEL |
BMC150_ACCEL |
CONFIG_BMA280_GPIO_DEV_NAME |
GPIO device |
CONFIG_BMA280_GPIO_PIN_NUM |
Interrupt GPIO pin number |
CONFIG_BMA280_I2C_ADDR |
BMA280 I2C address |
CONFIG_BMA280_I2C_MASTER_DEV_NAME |
I2C master device name |
CONFIG_BMA280_NAME |
Driver name |
CONFIG_BMA280_PMU_BW_1 |
7.81Hz |
CONFIG_BMA280_PMU_BW_2 |
15.63HZ |
CONFIG_BMA280_PMU_BW_3 |
31.25Hz |
CONFIG_BMA280_PMU_BW_4 |
62.5Hz |
CONFIG_BMA280_PMU_BW_5 |
125Hz |
CONFIG_BMA280_PMU_BW_6 |
250HZ |
CONFIG_BMA280_PMU_BW_7 |
500Hz |
CONFIG_BMA280_PMU_BW_8 |
unfiltered |
CONFIG_BMA280_PMU_RANGE_16G |
+/-16g |
CONFIG_BMA280_PMU_RANGE_2G |
+/-2g |
CONFIG_BMA280_PMU_RANGE_4G |
+/-4g |
CONFIG_BMA280_PMU_RANGE_8G |
+/-8g |
CONFIG_BMA280_THREAD_PRIORITY |
Thread priority |
CONFIG_BMA280_THREAD_STACK_SIZE |
Thread stack size |
CONFIG_BMA280_TRIGGER |
|
CONFIG_BMA280_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_BMA280_TRIGGER_NONE |
No trigger |
CONFIG_BMA280_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_BMC150_MAGN |
BMC150_MAGN I2C Magnetometer Chip |
CONFIG_BMC150_MAGN_DEV_NAME |
BMC150_MAGN device name |
CONFIG_BMC150_MAGN_GPIO_DRDY_DEV_NAME |
GPIO device where BMC150_MAGN data ready interrupt is connected |
CONFIG_BMC150_MAGN_GPIO_DRDY_INT_PIN |
GPIO pin number for the data ready interrupt pin |
CONFIG_BMC150_MAGN_I2C_ADDR |
BMC150_MAGN I2C slave address |
CONFIG_BMC150_MAGN_I2C_MASTER_DEV_NAME |
I2C master where BMC150_MAGN is connected |
CONFIG_BMC150_MAGN_PRESET_ENHANCED_REGULAR |
Enhanced regular (15, 27, 10) |
CONFIG_BMC150_MAGN_PRESET_HIGH_ACCURACY |
High accuracy (47, 83, 20) |
CONFIG_BMC150_MAGN_PRESET_LOW_POWER |
Low power (3, 3, 10) |
CONFIG_BMC150_MAGN_PRESET_REGULAR |
Regular (9, 15, 10) |
CONFIG_BMC150_MAGN_SAMPLING_RATE_RUNTIME |
Enable dynamic sampling rate |
CONFIG_BMC150_MAGN_SAMPLING_REP_XY |
Enable dynamic XY oversampling |
CONFIG_BMC150_MAGN_SAMPLING_REP_Z |
Enable dynamic Z oversampling |
CONFIG_BMC150_MAGN_TRIGGER |
Enable triggers |
CONFIG_BMC150_MAGN_TRIGGER_DRDY |
Enable data ready trigger |
CONFIG_BMC150_MAGN_TRIGGER_THREAD_STACK |
Thread stack size |
CONFIG_BME280 |
BME280/BMP280 sensor |
CONFIG_BME280_FILTER_16 |
16 |
CONFIG_BME280_FILTER_2 |
2 |
CONFIG_BME280_FILTER_4 |
4 |
CONFIG_BME280_FILTER_8 |
8 |
CONFIG_BME280_FILTER_OFF |
filter off |
CONFIG_BME280_HUMIDITY_OVER_16X |
x16 |
CONFIG_BME280_HUMIDITY_OVER_1X |
x1 |
CONFIG_BME280_HUMIDITY_OVER_2X |
x2 |
CONFIG_BME280_HUMIDITY_OVER_4X |
x4 |
CONFIG_BME280_HUMIDITY_OVER_8X |
x8 |
CONFIG_BME280_PRESS_OVER_16X |
x16 |
CONFIG_BME280_PRESS_OVER_1X |
x1 |
CONFIG_BME280_PRESS_OVER_2X |
x2 |
CONFIG_BME280_PRESS_OVER_4X |
x4 |
CONFIG_BME280_PRESS_OVER_8X |
x8 |
CONFIG_BME280_STANDBY_05MS |
0.5ms |
CONFIG_BME280_STANDBY_1000MS |
1000ms |
CONFIG_BME280_STANDBY_125MS |
125ms |
CONFIG_BME280_STANDBY_2000MS |
2000ms BMP280 / 10ms BME280 |
CONFIG_BME280_STANDBY_250MS |
250ms |
CONFIG_BME280_STANDBY_4000MS |
4000ms BMP280 / 20ms BME280 |
CONFIG_BME280_STANDBY_500MS |
500ms |
CONFIG_BME280_STANDBY_62MS |
62.5ms |
CONFIG_BME280_TEMP_OVER_16X |
x16 |
CONFIG_BME280_TEMP_OVER_1X |
x1 |
CONFIG_BME280_TEMP_OVER_2X |
x2 |
CONFIG_BME280_TEMP_OVER_4X |
x4 |
CONFIG_BME280_TEMP_OVER_8X |
x8 |
CONFIG_BMG160 |
Bosch BMG160 gyroscope support |
CONFIG_BMG160_DRV_NAME |
Driver’s name |
CONFIG_BMG160_GPIO_PORT_NAME |
GPIO controller port name |
CONFIG_BMG160_I2C_ADDR |
BMG160 I2C address |
CONFIG_BMG160_I2C_PORT_NAME |
I2C master controller port name |
CONFIG_BMG160_I2C_SPEED_FAST |
Fast |
CONFIG_BMG160_I2C_SPEED_STANDARD |
Standard |
CONFIG_BMG160_INT_PIN |
BMG160 INT PIN |
CONFIG_BMG160_ODR_100 |
100 Hz |
CONFIG_BMG160_ODR_1000 |
1000 Hz |
CONFIG_BMG160_ODR_200 |
200 Hz |
CONFIG_BMG160_ODR_2000 |
2000 Hz |
CONFIG_BMG160_ODR_400 |
400 Hz |
CONFIG_BMG160_ODR_RUNTIME |
Set at runtime. |
CONFIG_BMG160_RANGE_1000DPS |
1000 DPS |
CONFIG_BMG160_RANGE_125DPS |
125 DPS |
CONFIG_BMG160_RANGE_2000DPS |
2000 DPS |
CONFIG_BMG160_RANGE_250DPS |
250 DPS |
CONFIG_BMG160_RANGE_500DPS |
500 DPS |
CONFIG_BMG160_RANGE_RUNTIME |
Set at runtime. |
CONFIG_BMG160_THREAD_PRIORITY |
Own thread priority |
CONFIG_BMG160_THREAD_STACK_SIZE |
Own thread stack size |
CONFIG_BMG160_TRIGGER |
|
CONFIG_BMG160_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_BMG160_TRIGGER_NONE |
No trigger |
CONFIG_BMG160_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_BMI160 |
Bosch BMI160 inertial measurement unit |
CONFIG_BMI160_ACCEL_ODR_100 |
100 Hz |
CONFIG_BMI160_ACCEL_ODR_1600 |
1600 Hz |
CONFIG_BMI160_ACCEL_ODR_200 |
200 Hz |
CONFIG_BMI160_ACCEL_ODR_25 |
25 Hz |
CONFIG_BMI160_ACCEL_ODR_25_16 |
1.56 Hz |
CONFIG_BMI160_ACCEL_ODR_25_2 |
12.5 Hz |
CONFIG_BMI160_ACCEL_ODR_25_32 |
0.78 Hz |
CONFIG_BMI160_ACCEL_ODR_25_4 |
6.25 Hz |
CONFIG_BMI160_ACCEL_ODR_25_8 |
3.125 Hz |
CONFIG_BMI160_ACCEL_ODR_400 |
400 Hz |
CONFIG_BMI160_ACCEL_ODR_50 |
50 Hz |
CONFIG_BMI160_ACCEL_ODR_800 |
800 Hz |
CONFIG_BMI160_ACCEL_ODR_RUNTIME |
Set at runtime. |
CONFIG_BMI160_ACCEL_PMU_LOW_POWER |
low power |
CONFIG_BMI160_ACCEL_PMU_NORMAL |
normal |
CONFIG_BMI160_ACCEL_PMU_RUNTIME |
Set at runtime. |
CONFIG_BMI160_ACCEL_PMU_SUSPEND |
suspended/not used |
CONFIG_BMI160_ACCEL_RANGE_16G |
16G |
CONFIG_BMI160_ACCEL_RANGE_2G |
2G |
CONFIG_BMI160_ACCEL_RANGE_4G |
4G |
CONFIG_BMI160_ACCEL_RANGE_8G |
8G |
CONFIG_BMI160_ACCEL_RANGE_RUNTIME |
Set at runtime. |
CONFIG_BMI160_GYRO_ODR_100 |
100 Hz |
CONFIG_BMI160_GYRO_ODR_1600 |
1600 Hz |
CONFIG_BMI160_GYRO_ODR_200 |
200 Hz |
CONFIG_BMI160_GYRO_ODR_25 |
25 Hz |
CONFIG_BMI160_GYRO_ODR_3200 |
3200 Hz |
CONFIG_BMI160_GYRO_ODR_400 |
400 Hz |
CONFIG_BMI160_GYRO_ODR_50 |
50 Hz |
CONFIG_BMI160_GYRO_ODR_800 |
800 Hz |
CONFIG_BMI160_GYRO_ODR_RUNTIME |
Set at runtime. |
CONFIG_BMI160_GYRO_PMU_FAST_STARTUP |
fast start-up |
CONFIG_BMI160_GYRO_PMU_NORMAL |
normal |
CONFIG_BMI160_GYRO_PMU_RUNTIME |
Set at runtime. |
CONFIG_BMI160_GYRO_PMU_SUSPEND |
suspended/not used |
CONFIG_BMI160_GYRO_RANGE_1000DPS |
1000 DPS |
CONFIG_BMI160_GYRO_RANGE_125DPS |
125 DPS |
CONFIG_BMI160_GYRO_RANGE_2000DPS |
2000 DPS |
CONFIG_BMI160_GYRO_RANGE_250DPS |
250 DPS |
CONFIG_BMI160_GYRO_RANGE_500DPS |
500 DPS |
CONFIG_BMI160_GYRO_RANGE_RUNTIME |
Set at runtime. |
CONFIG_BMI160_THREAD_PRIORITY |
Own thread priority |
CONFIG_BMI160_THREAD_STACK_SIZE |
Own thread stack size |
CONFIG_BMI160_TRIGGER |
|
CONFIG_BMI160_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_BMI160_TRIGGER_NONE |
No trigger |
CONFIG_BMI160_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_BMM150 |
BMM150 I2C Geomagnetic Chip |
CONFIG_BMM150_DEV_NAME |
BMM150 device name |
CONFIG_BMM150_I2C_ADDR |
BMM150 I2C slave address |
CONFIG_BMM150_I2C_MASTER_DEV_NAME |
I2C master where BMM150 is connected |
CONFIG_BMM150_PRESET_ENHANCED_REGULAR |
Enhanced regular (15, 27, 10) |
CONFIG_BMM150_PRESET_HIGH_ACCURACY |
High accuracy (47, 83, 20) |
CONFIG_BMM150_PRESET_LOW_POWER |
Low power (3, 3, 10) |
CONFIG_BMM150_PRESET_REGULAR |
Regular (9, 15, 10) |
CONFIG_BMM150_SAMPLING_RATE_RUNTIME |
Enable dynamic sampling rate |
CONFIG_BMM150_SAMPLING_REP_XY |
Enable dynamic XY oversampling |
CONFIG_BMM150_SAMPLING_REP_Z |
Enable dynamic Z oversampling |
CONFIG_BOARD |
|
CONFIG_BOARD_96B_ARGONKEY |
96Boards Argonkey |
CONFIG_BOARD_96B_CARBON |
96Boards Carbon (STM32F401) |
CONFIG_BOARD_96B_CARBON_NRF51 |
96Boards Carbon (nRF51) |
CONFIG_BOARD_96B_NEONKEY |
96Boards Neonkey |
CONFIG_BOARD_96B_NITROGEN |
96Boards Nitrogen |
CONFIG_BOARD_96B_STM32_SENSOR_MEZ |
96Boards STM32 Sensor Mezzanine Board |
CONFIG_BOARD_ACRN |
ACRN User OS |
CONFIG_BOARD_ADAFRUIT_FEATHER_M0_BASIC_PROTO |
Adafruit Feather M0 Basic Proto |
CONFIG_BOARD_ADAFRUIT_TRINKET_M0 |
Adafruit Trinket M0 |
CONFIG_BOARD_ALTERA_MAX10 |
Altera MAX10 Board |
CONFIG_BOARD_ARDUINO_101 |
Arduino 101 Board |
CONFIG_BOARD_ARDUINO_101_SSS |
Arduino 101 Sensor Sub System |
CONFIG_BOARD_ARDUINO_DUE |
Arduino Due Board |
CONFIG_BOARD_ARDUINO_ZERO |
Arduino Zero |
CONFIG_BOARD_ATSAMD20_XPRO |
SAM D20 Xplained Pro |
CONFIG_BOARD_ATSAMD21_XPRO |
SAM D21 Xplained Pro |
CONFIG_BOARD_BBC_MICROBIT |
BBC MICRO:BIT |
CONFIG_BOARD_BL652_DVK |
BL652 DVK |
CONFIG_BOARD_BL654_DVK |
BL654 DVK |
CONFIG_BOARD_B_L072Z_LRWAN1 |
STMicroelectronics B-L072Z-LRWAN1 Discovery kit |
CONFIG_BOARD_CC2650_SENSORTAG |
TI CC2650 SensorTag |
CONFIG_BOARD_CC3220SF_LAUNCHXL |
TI CC3220SF LAUNCHXL |
CONFIG_BOARD_CCS_VDD_PWR_CTRL_INIT_PRIORITY |
CCS_VDD power rail init priority |
CONFIG_BOARD_COLIBRI_IMX7D_M4 |
Toradex Colibri iMX7 Dual |
CONFIG_BOARD_CURIE_BLE |
Curie BLE |
CONFIG_BOARD_CY8CKIT_062_WIFI_BT_M0 |
PSoC6 WiFi-BT Pioneer Kit M0 |
CONFIG_BOARD_CY8CKIT_062_WIFI_BT_M4 |
PSoC6 WiFi-BT Pioneer Kit M4 |
CONFIG_BOARD_DEPRECATED |
|
CONFIG_BOARD_DISCO_L475_IOT1 |
Discovery IoT L475 Development Board |
CONFIG_BOARD_DRAGINO_LSN50 |
Dragino LSN50 Sensor Node |
CONFIG_BOARD_EFM32HG_SLSTK3400A |
SiLabs EFM32HG-SLSTK3400A (Happy Gecko) |
CONFIG_BOARD_EFM32PG_STK3402A |
SiLabs EFM32PG-STK3402A (Pearl Gecko) |
CONFIG_BOARD_EFM32WG_STK3800 |
SiLabs EFM32WG-STK3800 (Wonder Gecko) |
CONFIG_BOARD_EFR32MG_SLTB004A |
SiLabs EFR32MG-SLTB004A (Thunderboard Sense 2) |
CONFIG_BOARD_EFR32_SLWSTK6061A |
SiLabs EFR32-SLWSTK6061A (Flex Gecko) |
CONFIG_BOARD_EM_STARTERKIT |
ARC EM Starter Kit |
CONFIG_BOARD_EM_STARTERKIT_R22 |
2.2 |
CONFIG_BOARD_EM_STARTERKIT_R23 |
2.3 |
CONFIG_BOARD_ENABLE_DCDC |
Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode |
CONFIG_BOARD_ESP32 |
ESP32 Development Board |
CONFIG_BOARD_FRDM_K64F |
Freescale FRDM-K64F |
CONFIG_BOARD_FRDM_KL25Z |
NXP FRDM-KL25Z |
CONFIG_BOARD_FRDM_KW41Z |
NXP FRDM-KW41Z |
CONFIG_BOARD_GALILEO |
Galileo Gen2 |
CONFIG_BOARD_HAS_NRF5_BOOTLOADER |
Board has nRF5 bootloader |
CONFIG_BOARD_HEXIWEAR_K64 |
NXP Hexiwear K64 |
CONFIG_BOARD_HEXIWEAR_KW40Z |
Hexiwear KW40Z |
CONFIG_BOARD_HIFIVE1 |
HiFive1 target |
CONFIG_BOARD_INIT_PRIORITY |
|
CONFIG_BOARD_INTEL_S1000_CRB |
Xtensa on Intel_S1000 |
CONFIG_BOARD_IOTDK |
ARC IoT Development Kit |
CONFIG_BOARD_LPCXPRESSO54114_M0 |
NXP LPCXPRESSO-54114 M0 |
CONFIG_BOARD_LPCXPRESSO54114_M4 |
NXP LPCXPRESSO-54114 M4 |
CONFIG_BOARD_M2GL025_MIV |
Microsemi M2GL025 IGLOO2 dev board with Mi-V CPU |
CONFIG_BOARD_MEC2016EVB_ASSY6797 |
Microchip MEC2016 EVB ASSY 6797 Development board |
CONFIG_BOARD_MIMXRT1020_EVK |
NXP MIMXRT1020-EVK |
CONFIG_BOARD_MIMXRT1050_EVK |
NXP MIMXRT1050-EVK |
CONFIG_BOARD_MIMXRT1050_EVK_QSPI |
NXP MIMXRT1050-EVK-QSPI |
CONFIG_BOARD_MIMXRT1060_EVK |
NXP MIMXRT1060-EVK |
CONFIG_BOARD_MIMXRT1060_EVK_HYPERFLASH |
NXP MIMXRT1060-EVK-HYPERFLASH |
CONFIG_BOARD_MIMXRT1064_EVK |
NXP MIMXRT1064-EVK |
CONFIG_BOARD_MINNOWBOARD |
MinnowBoard Max |
CONFIG_BOARD_MPS2_AN385 |
ARM Cortex-M3 SMM on V2M-MPS2 (Application Note AN385) |
CONFIG_BOARD_MSP_EXP432P401R_LAUNCHXL |
TI MSP-EXP432P401R LAUNCHXL |
CONFIG_BOARD_MUSCA_A |
ARM Cortex-M33 SMM on V2M-MUSCA |
CONFIG_BOARD_NATIVE_POSIX |
Native POSIX |
CONFIG_BOARD_NRF51_BLE400 |
nRF51 BLE400 |
CONFIG_BOARD_NRF51_BLENANO |
nRF51 BLENANO |
CONFIG_BOARD_NRF51_PCA10028 |
nRF51 PCA10028 |
CONFIG_BOARD_NRF51_VBLUNO51 |
nRF51 VBLUno51 BLE |
CONFIG_BOARD_NRF52810_PCA10040 |
nRF52810 PCA10040 |
CONFIG_BOARD_NRF52832_MDK |
nRF52832-MDK |
CONFIG_BOARD_NRF52840_BLIP |
Electronut Labs Blip |
CONFIG_BOARD_NRF52840_MDK |
NRF52840-MDK |
CONFIG_BOARD_NRF52840_PAPYR |
NRF52840 PAPYR |
CONFIG_BOARD_NRF52840_PCA10056 |
NRF52840 PCA10056 |
CONFIG_BOARD_NRF52840_PCA10059 |
NRF52840 PCA10059 |
CONFIG_BOARD_NRF52840_PCA10090 |
NRF52840 PCA10090 |
CONFIG_BOARD_NRF52_ADAFRUIT_FEATHER |
nRF52 ADAFRUIT FEATHER |
CONFIG_BOARD_NRF52_BLENANO2 |
nRF52 BLENANO2 |
CONFIG_BOARD_NRF52_BSIM |
NRF52 simulation model |
CONFIG_BOARD_NRF52_PCA10040 |
nRF52 PCA10040 |
CONFIG_BOARD_NRF52_PCA20020 |
nRF52 PCA20020 |
CONFIG_BOARD_NRF52_SPARKFUN |
nRF52 SPARKFUN |
CONFIG_BOARD_NRF52_VBLUNO52 |
nRF52 VBLUno52 |
CONFIG_BOARD_NRF9160_PCA10090 |
nRF9160 PCA10090 |
CONFIG_BOARD_NRF9160_PCA10090NS |
nRF9160 PCA10090 non-secure |
CONFIG_BOARD_NSIM_EM |
ARC EM Nsim simulator |
CONFIG_BOARD_NUCLEO_F030R8 |
NUCLEO-64 F030R8 Development Board |
CONFIG_BOARD_NUCLEO_F070RB |
NUCLEO-64 F070RB Development Board |
CONFIG_BOARD_NUCLEO_F091RC |
NUCLEO-64 F091RC Development Board |
CONFIG_BOARD_NUCLEO_F103RB |
NUCLEO-64 F103RB Development Board |
CONFIG_BOARD_NUCLEO_F207ZG |
NUCLEO-144 F207ZG Development Board |
CONFIG_BOARD_NUCLEO_F302R8 |
NUCLEO-64 F302R8 Development Board |
CONFIG_BOARD_NUCLEO_F334R8 |
NUCLEO-64 F334R8 Development Board |
CONFIG_BOARD_NUCLEO_F401RE |
NUCLEO-64 F401RE Development Board |
CONFIG_BOARD_NUCLEO_F411RE |
NUCLEO-64 F411RE Development Board |
CONFIG_BOARD_NUCLEO_F412ZG |
NUCLEO-144 F412ZG Development Board |
CONFIG_BOARD_NUCLEO_F413ZH |
NUCLEO-144 F413ZH Development Board |
CONFIG_BOARD_NUCLEO_F429ZI |
NUCLEO-144 F429ZI Development Board |
CONFIG_BOARD_NUCLEO_F446RE |
Nucleo F446RE Development Board |
CONFIG_BOARD_NUCLEO_F746ZG |
Nucleo F746ZG Development Board |
CONFIG_BOARD_NUCLEO_F756ZG |
Nucleo F756ZG Development Board |
CONFIG_BOARD_NUCLEO_L053R8 |
NUCLEO-64 L053R8 Development Board |
CONFIG_BOARD_NUCLEO_L073RZ |
NUCLEO-64 L073RZ Development Board |
CONFIG_BOARD_NUCLEO_L432KC |
Nucleo L432KC Development Board |
CONFIG_BOARD_NUCLEO_L476RG |
Nucleo L476RG Development Board |
CONFIG_BOARD_NUCLEO_L496ZG |
Nucleo L496ZG Development Board |
CONFIG_BOARD_NUCLEO_L4R5ZI |
Nucleo L4R5ZI Development Board |
CONFIG_BOARD_OLIMEXINO_STM32 |
OLIMEXINO-STM32 Development Board |
CONFIG_BOARD_OLIMEX_STM32_E407 |
OLIMEX-STM32-E407 Development Board |
CONFIG_BOARD_OLIMEX_STM32_H407 |
OLIMEX-STM32-H407 Development Board |
CONFIG_BOARD_OLIMEX_STM32_P405 |
OLIMEX-STM32-P405 Development Board |
CONFIG_BOARD_PARTICLE_ARGON |
Particle Argon Board |
CONFIG_BOARD_PARTICLE_BORON |
Particle Boron Board |
CONFIG_BOARD_PARTICLE_XENON |
Particle Xenon Board |
CONFIG_BOARD_PCA10090_BUTTON0_ARDUINO |
Route to Arduino pins |
CONFIG_BOARD_PCA10090_BUTTON0_PHY |
Route to buttons on the kit |
CONFIG_BOARD_PCA10090_BUTTON1_ARDUINO |
Route to Arduino pins |
CONFIG_BOARD_PCA10090_BUTTON1_PHY |
Route to buttons on the kit |
CONFIG_BOARD_PCA10090_INTERFACE0_ARDUINO |
Route to Arduino pins |
CONFIG_BOARD_PCA10090_INTERFACE0_MCU |
Route to nRF52840 |
CONFIG_BOARD_PCA10090_INTERFACE1_MCU |
Route to nRF52840 |
CONFIG_BOARD_PCA10090_INTERFACE1_TRACE |
Route to TRACE interface |
CONFIG_BOARD_PCA10090_INTERFACE2_COEX |
Route to COEX interface |
CONFIG_BOARD_PCA10090_INTERFACE2_MCU |
Route to nRF52840 |
CONFIG_BOARD_PCA10090_LED0_ARDUINO |
Route to Arduino pins |
CONFIG_BOARD_PCA10090_LED0_PHY |
Route to LED on the kit |
CONFIG_BOARD_PCA10090_LED1_ARDUINO |
Route to Arduino pins |
CONFIG_BOARD_PCA10090_LED1_PHY |
Route to LED on the kit |
CONFIG_BOARD_PCA10090_LED2_ARDUINO |
Route to Arduino pins |
CONFIG_BOARD_PCA10090_LED2_PHY |
Route to LED on the kit |
CONFIG_BOARD_PCA10090_LED3_ARDUINO |
Route to Arduino pins |
CONFIG_BOARD_PCA10090_LED3_PHY |
Route to LED on the kit |
CONFIG_BOARD_PCA10090_SWITCH0_ARDUINO |
Route to Arduino pins |
CONFIG_BOARD_PCA10090_SWITCH0_PHY |
Route to switches on the kit |
CONFIG_BOARD_PCA10090_SWITCH1_ARDUINO |
Route to Arduino pins |
CONFIG_BOARD_PCA10090_SWITCH1_PHY |
Route to switches on the kit |
CONFIG_BOARD_PCA10090_UART0_ARDUINO |
Route to Arduino pins |
CONFIG_BOARD_PCA10090_UART0_VCOM |
Route to VCOM0 |
CONFIG_BOARD_PCA10090_UART1_ARDUINO |
Route to Arduino pins |
CONFIG_BOARD_PCA10090_UART1_VCOM |
Route to VCOM2 |
CONFIG_BOARD_QEMU_CORTEX_M3 |
Cortex-M3 Emulation (QEMU) |
CONFIG_BOARD_QEMU_NIOS2 |
QEMU NIOS II target |
CONFIG_BOARD_QEMU_RISCV32 |
QEMU RISCV32 target |
CONFIG_BOARD_QEMU_X86 |
QEMU x86 |
CONFIG_BOARD_QEMU_X86_64 |
QEMU x86_64 |
CONFIG_BOARD_QEMU_X86_IAMCU |
QEMU x86 (IAMCU ABI) |
CONFIG_BOARD_QEMU_XTENSA |
Xtensa emulation using QEMU |
CONFIG_BOARD_QUARK_D2000_CRB |
Intel Quark D2000 CRB |
CONFIG_BOARD_QUARK_SE_C1000_BLE |
Quark SE C1000 Devboard - BLE Core |
CONFIG_BOARD_QUARK_SE_C1000_DEVBOARD |
Quark SE C1000 Devboard |
CONFIG_BOARD_QUARK_SE_C1000_DEVBOARD_SS |
Quark SE C1000 - Sensor Sub System |
CONFIG_BOARD_REEL_BOARD |
reel Board |
CONFIG_BOARD_RV32M1_VEGA |
RV32M1 RISC-V cores |
CONFIG_BOARD_SAM4S_XPLAINED |
Atmel SAM4S Xplained |
CONFIG_BOARD_SAM_E70_XPLAINED |
Atmel SMART SAM E70 Xplained Board |
CONFIG_BOARD_STM3210C_EVAL |
STM3210C-EVAL Evaluation Board |
CONFIG_BOARD_STM32373C_EVAL |
STM32373C_EVAL Evaluation Board |
CONFIG_BOARD_STM32F072B_DISCO |
STM32F072B-DISCO Development Board |
CONFIG_BOARD_STM32F072_EVAL |
STM32F072-EVAL Development Board |
CONFIG_BOARD_STM32F0_DISCO |
STM32F0DISCOVERY Development Board |
CONFIG_BOARD_STM32F3_DISCO |
STM32F3DISCOVERY Development Board |
CONFIG_BOARD_STM32F411E_DISCO |
STM32F411E-DISCO Development Board |
CONFIG_BOARD_STM32F412G_DISCO |
STM32F412G-DISCO Development Board |
CONFIG_BOARD_STM32F429I_DISC1 |
STM32F429I-DISC1 Development Board |
CONFIG_BOARD_STM32F469I_DISCO |
STM32F469I-DISCO Development Board |
CONFIG_BOARD_STM32F4_DISCO |
STM32F4DISCOVERY Development Board |
CONFIG_BOARD_STM32F723E_DISCO |
STM32F723E Discovery Development Board |
CONFIG_BOARD_STM32F746G_DISCO |
STM32F746G Discovery Development Board |
CONFIG_BOARD_STM32F769I_DISCO |
STM32F769I Discovery Development Board |
CONFIG_BOARD_STM32L476G_DISCO |
STM32L476G Discovery Development Board |
CONFIG_BOARD_STM32L496G_DISCO |
STM32L496G Discovery Development Board |
CONFIG_BOARD_STM32_MIN_DEV |
STM32 Minimum Development Board |
CONFIG_BOARD_TINYTILE |
TinyTILE |
CONFIG_BOARD_UDOO_NEO_FULL_M4 |
UDOO Neo Full |
CONFIG_BOARD_UP_SQUARED |
UP Squared |
CONFIG_BOARD_UP_SQUARED_ATOM |
Atom E3940 |
CONFIG_BOARD_UP_SQUARED_CELERON |
Celeron N3350 |
CONFIG_BOARD_UP_SQUARED_PENTIUM |
Pentium N4200 |
CONFIG_BOARD_USB_KW24D512 |
NXP USB-KW24D512 |
CONFIG_BOARD_V2M_BEETLE |
ARM V2M Beetle Board |
CONFIG_BOARD_VDD_PWR_CTRL_INIT_PRIORITY |
VDD power rail init priority |
CONFIG_BOARD_WARP7_M4 |
WaRP7 iMX7 Solo |
CONFIG_BOARD_X86_JAILHOUSE |
QEMU x86 (root cell) |
CONFIG_BOARD_XT_SIM |
Xtensa Development ISS |
CONFIG_BOOTLOADER_CONTEXT_RESTORE |
Boot loader has context restore support |
CONFIG_BOOTLOADER_CONTEXT_RESTORE_SUPPORTED |
|
CONFIG_BOOTLOADER_ESP_IDF |
ESP-IDF bootloader support |
CONFIG_BOOTLOADER_KEXEC |
Boot using Linux kexec() system call |
CONFIG_BOOTLOADER_MCUBOOT |
MCUboot bootloader support |
CONFIG_BOOTLOADER_SRAM_SIZE |
SRAM reserved for bootloader |
CONFIG_BOOTLOADER_UNKNOWN |
Generic boot loader support |
CONFIG_BOOT_BANNER |
Boot banner |
CONFIG_BOOT_DELAY |
Boot delay in milliseconds |
CONFIG_BOOT_FLEXSPI_NAND |
FlexSPI serial NAND |
CONFIG_BOOT_FLEXSPI_NOR |
FlexSPI serial NOR |
CONFIG_BOOT_SEMC_NAND |
SEMC parallel NAND |
CONFIG_BOOT_SEMC_NOR |
SEMC parallel NOR |
CONFIG_BOOT_TIME_MEASUREMENT |
Boot time measurements [EXPERIMENTAL] |
CONFIG_BOUNDS_CHECK_BYPASS_MITIGATION |
Enable bounds check bypass mitigations for speculative execution |
CONFIG_BSP_SHARED_RESTORE_INFO_RAM_ADDR |
Address of the restore information in RAM shared with the QMSI Bootloader |
CONFIG_BSP_SHARED_RESTORE_INFO_SIZE |
Size of the restore information in RAM shared with the QMSI Bootloader |
CONFIG_BT |
Bluetooth support |
CONFIG_BT_A2DP |
Bluetooth A2DP Profile [EXPERIMENTAL] |
CONFIG_BT_ACL_RX_COUNT |
Number of incoming ACL data buffers |
CONFIG_BT_ADV_SET |
LE Advertising Extensions Sets |
CONFIG_BT_ATT_ENFORCE_FLOW |
Enforce strict flow control semantics for incoming PDUs |
CONFIG_BT_ATT_PREPARE_COUNT |
Number of ATT prepare write buffers |
CONFIG_BT_ATT_TX_MAX |
Maximum number of queued outgoing ATT PDUs |
CONFIG_BT_AUTO_PHY_UPDATE |
Auto-initiate PHY Update Procedure |
CONFIG_BT_AVDTP |
Bluetooth AVDTP protocol support [EXPERIMENTAL] |
CONFIG_BT_BACKGROUND_SCAN_INTERVAL |
Scan interval used for background scanning in 0.625 ms units |
CONFIG_BT_BACKGROUND_SCAN_WINDOW |
Scan window used for background scanning in 0.625 ms units |
CONFIG_BT_BLUENRG_ACI |
Enable ACI message with with BlueNRG-based devices |
CONFIG_BT_BONDABLE |
Bondable Mode |
CONFIG_BT_BREDR |
Bluetooth BR/EDR support [EXPERIMENTAL] |
CONFIG_BT_BROADCASTER |
Broadcaster Role support |
CONFIG_BT_CENTRAL |
Central Role support |
CONFIG_BT_CONN |
|
CONFIG_BT_CONN_TX_MAX |
Maximum number of pending TX buffers |
CONFIG_BT_CREATE_CONN_TIMEOUT |
Timeout for pending LE Create Connection command in seconds |
CONFIG_BT_CTLR |
Bluetooth Controller |
CONFIG_BT_CTLR_ADVANCED_FEATURES |
Show advanced features |
CONFIG_BT_CTLR_ADV_EXT |
LE Advertising Extensions |
CONFIG_BT_CTLR_ADV_INDICATION |
Advertisement indications |
CONFIG_BT_CTLR_ASSERT_HANDLER |
Bluetooth Controller Assertion Handler |
CONFIG_BT_CTLR_CHAN_SEL_2 |
Channel Selection Algorithm #2 |
CONFIG_BT_CTLR_COMPANY_ID |
Company Id |
CONFIG_BT_CTLR_CONN_PARAM_REQ |
Connection Parameter Request |
CONFIG_BT_CTLR_CONN_RSSI |
Connection RSSI |
CONFIG_BT_CTLR_CRYPTO |
Enable crypto functions in Controller |
CONFIG_BT_CTLR_DATA_LENGTH |
|
CONFIG_BT_CTLR_DATA_LENGTH_CLEAR |
Data Length Support (Cleartext only) |
CONFIG_BT_CTLR_DATA_LENGTH_MAX |
Maximum data length supported |
CONFIG_BT_CTLR_DEBUG_PINS |
Bluetooth Controller Debug Pins |
CONFIG_BT_CTLR_DTM |
|
CONFIG_BT_CTLR_DTM_HCI |
Direct Test Mode over HCI |
CONFIG_BT_CTLR_DUP_FILTER_LEN |
Number of addresses in the scan duplicate filter |
CONFIG_BT_CTLR_EXT_REJ_IND |
Extended Reject Indication |
CONFIG_BT_CTLR_EXT_SCAN_FP |
LE Extended Scanner Filter Policies |
CONFIG_BT_CTLR_FAST_ENC |
Fast Encryption Setup |
CONFIG_BT_CTLR_FILTER |
Device Whitelist Support |
CONFIG_BT_CTLR_GPIO_LNA |
Low Noise Amplifier GPIO interface |
CONFIG_BT_CTLR_GPIO_LNA_OFFSET |
Time from LNA ON to Rx ready |
CONFIG_BT_CTLR_GPIO_LNA_PIN |
Low Noise Amplifier GPIO pin number |
CONFIG_BT_CTLR_GPIO_LNA_POL_INV |
Inverted polarity for the LNA pin |
CONFIG_BT_CTLR_GPIO_PA |
Power Amplifier GPIO interface |
CONFIG_BT_CTLR_GPIO_PA_OFFSET |
Time from PA ON to Tx ready |
CONFIG_BT_CTLR_GPIO_PA_PIN |
Power Amplifier GPIO pin number |
CONFIG_BT_CTLR_GPIO_PA_POL_INV |
Inverted polarity for the PA pin |
CONFIG_BT_CTLR_HCI_VS_BUILD_INFO |
Zephyr HCI VS Build Info string |
CONFIG_BT_CTLR_JOB_PRIO |
Ticker’s JOB IRQ priority |
CONFIG_BT_CTLR_LE_ENC |
LE Encryption |
CONFIG_BT_CTLR_LE_PING |
LE Ping |
CONFIG_BT_CTLR_LLID_DATA_START_EMPTY |
Handle zero length L2CAP start frame |
CONFIG_BT_CTLR_LLL_PRIO |
Lower Link Layer (Radio) IRQ priority |
CONFIG_BT_CTLR_LOWEST_PRIO |
Link Layer Lowest IRQ priority |
CONFIG_BT_CTLR_LOW_LAT |
Low latency non-negotiating event preemption |
CONFIG_BT_CTLR_MESH_SCAN_FILTERS |
Number of Mesh scan filters |
CONFIG_BT_CTLR_MESH_SF_PATTERNS |
Number of Mesh scan filter patterns |
CONFIG_BT_CTLR_MIN_USED_CHAN |
Minimum Number of Used Channels |
CONFIG_BT_CTLR_PA_LNA_GPIOTE_CHAN |
|
CONFIG_BT_CTLR_PHY |
|
CONFIG_BT_CTLR_PHY_2M |
2Mbps PHY Support |
CONFIG_BT_CTLR_PHY_2M_NRF |
2Mbps Nordic Semiconductor PHY Support (Cleartext only) |
CONFIG_BT_CTLR_PHY_CODED |
Coded PHY Support |
CONFIG_BT_CTLR_PRIVACY |
LE Controller-based Privacy |
CONFIG_BT_CTLR_PROFILE_ISR |
Profile radio ISR |
CONFIG_BT_CTLR_RADIO_ENABLE_FAST |
Use tTXEN/RXEN,FAST ramp-up |
CONFIG_BT_CTLR_RL_SIZE |
LE Controller-based Privacy Resolving List size |
CONFIG_BT_CTLR_RX_BUFFERS |
Number of Rx buffers |
CONFIG_BT_CTLR_RX_ENQUEUE_HOLD |
Procedure Complete after on-air instant |
CONFIG_BT_CTLR_RX_PRIO |
|
CONFIG_BT_CTLR_RX_PRIO_STACK_SIZE |
|
CONFIG_BT_CTLR_SCAN_INDICATION |
Scanner indications |
CONFIG_BT_CTLR_SCAN_REQ_NOTIFY |
Scan Request Notifications |
CONFIG_BT_CTLR_SCAN_REQ_RSSI |
Measure Scan Request RSSI |
CONFIG_BT_CTLR_SCHED_ADVANCED |
Advanced scheduling |
CONFIG_BT_CTLR_SLAVE_FEAT_REQ |
Slave-initiated Features Exchange |
CONFIG_BT_CTLR_SUBVERSION_NUMBER |
Subversion Number |
CONFIG_BT_CTLR_SW_SWITCH_SINGLE_TIMER |
Single TIMER tIFS Trx SW switching |
CONFIG_BT_CTLR_TIFS_HW |
H/w Accelerated tIFS Trx switching |
CONFIG_BT_CTLR_TO_HOST_UART_DEV_NAME |
Device Name of UART Device to an external Bluetooth Host |
CONFIG_BT_CTLR_TX_BUFFERS |
Number of Tx buffers |
CONFIG_BT_CTLR_TX_BUFFER_SIZE |
Tx buffer size |
CONFIG_BT_CTLR_TX_PWR_0 |
0 dBm |
CONFIG_BT_CTLR_TX_PWR_MINUS_12 |
-12 dBm |
CONFIG_BT_CTLR_TX_PWR_MINUS_16 |
-16 dBm |
CONFIG_BT_CTLR_TX_PWR_MINUS_20 |
-20 dBm |
CONFIG_BT_CTLR_TX_PWR_MINUS_30 |
-30 dBm |
CONFIG_BT_CTLR_TX_PWR_MINUS_4 |
-4 dBm |
CONFIG_BT_CTLR_TX_PWR_MINUS_40 |
-40 dBm |
CONFIG_BT_CTLR_TX_PWR_MINUS_8 |
-8 dBm |
CONFIG_BT_CTLR_TX_PWR_PLUS_2 |
+2 dBm |
CONFIG_BT_CTLR_TX_PWR_PLUS_3 |
+3 dBm |
CONFIG_BT_CTLR_TX_PWR_PLUS_4 |
+4 dBm |
CONFIG_BT_CTLR_TX_PWR_PLUS_5 |
+5 dBm |
CONFIG_BT_CTLR_TX_PWR_PLUS_6 |
+6 dBm |
CONFIG_BT_CTLR_TX_PWR_PLUS_7 |
+7 dBm |
CONFIG_BT_CTLR_TX_PWR_PLUS_8 |
+8 dBm |
CONFIG_BT_CTLR_TX_RETRY_DISABLE |
Disable Tx Retry |
CONFIG_BT_CTLR_ULL_HIGH_PRIO |
Upper Link Layer High IRQ priority |
CONFIG_BT_CTLR_ULL_LOW_PRIO |
Upper Link Layer Low IRQ priority |
CONFIG_BT_CTLR_WORKER_PRIO |
Radio and Ticker’s Worker IRQ priority |
CONFIG_BT_CTLR_XTAL_ADVANCED |
Advanced event preparation |
CONFIG_BT_CTLR_XTAL_THRESHOLD |
Crystal shutdown threshold in uS |
CONFIG_BT_CUSTOM |
Custom |
CONFIG_BT_DATA_LEN_UPDATE |
Data Length Update |
CONFIG_BT_DEBUG |
|
CONFIG_BT_DEBUG_A2DP |
Bluetooth A2DP debug |
CONFIG_BT_DEBUG_ATT |
Bluetooth Attribute Protocol (ATT) debug |
CONFIG_BT_DEBUG_AVDTP |
Bluetooth AVDTP debug |
CONFIG_BT_DEBUG_CONN |
Bluetooth connection debug |
CONFIG_BT_DEBUG_GATT |
Bluetooth Generic Attribute Profile (GATT) debug |
CONFIG_BT_DEBUG_HCI_CORE |
Bluetooth HCI core debug |
CONFIG_BT_DEBUG_HCI_DRIVER |
Bluetooth HCI driver debug |
CONFIG_BT_DEBUG_HFP_HF |
Bluetooth Hands Free Profile (HFP) debug |
CONFIG_BT_DEBUG_KEYS |
Bluetooth security keys debug |
CONFIG_BT_DEBUG_L2CAP |
Bluetooth L2CAP debug |
CONFIG_BT_DEBUG_LOG |
Normal printf-style to console |
CONFIG_BT_DEBUG_MONITOR |
Monitor protocol over UART |
CONFIG_BT_DEBUG_NONE |
No debug log |
CONFIG_BT_DEBUG_RFCOMM |
Bluetooth RFCOMM debug |
CONFIG_BT_DEBUG_RPA |
Bluetooth Resolvable Private Address (RPA) debug |
CONFIG_BT_DEBUG_SDP |
Bluetooth Service Discovery Protocol (SDP) debug |
CONFIG_BT_DEBUG_SETTINGS |
Bluetooth storage debug |
CONFIG_BT_DEBUG_SMP |
Bluetooth Security Manager Protocol (SMP) debug |
CONFIG_BT_DEVICE_APPEARANCE |
Bluetooth device appearance |
CONFIG_BT_DEVICE_NAME |
Bluetooth device name |
CONFIG_BT_DEVICE_NAME_DYNAMIC |
Allow to set Bluetooth device name on runtime |
CONFIG_BT_DEVICE_NAME_GATT_WRITABLE |
Allow to write name by remote GATT clients |
CONFIG_BT_DEVICE_NAME_MAX |
Maximum size in bytes for device name |
CONFIG_BT_DISCARDABLE_BUF_COUNT |
Number of discardable event buffers |
CONFIG_BT_ECC |
Enable ECDH key generation support |
CONFIG_BT_FIXED_PASSKEY |
Use a fixed passkey for pairing |
CONFIG_BT_GAP_PERIPHERAL_PREF_PARAMS |
Configure peripheral preferred connection parameters |
CONFIG_BT_GATT_CACHING |
GATT Caching support |
CONFIG_BT_GATT_CLIENT |
GATT client support |
CONFIG_BT_GATT_DIS |
Enable GATT Device Information service |
CONFIG_BT_GATT_DIS_MANUF |
Manufacturer name |
CONFIG_BT_GATT_DIS_MODEL |
Model name |
CONFIG_BT_GATT_DIS_PNP |
Enable PnP_ID characteristic |
CONFIG_BT_GATT_DIS_PNP_PID |
Product ID |
CONFIG_BT_GATT_DIS_PNP_VER |
Product Version |
CONFIG_BT_GATT_DIS_PNP_VID |
Vendor ID |
CONFIG_BT_GATT_DIS_PNP_VID_SRC |
Vendor ID source |
CONFIG_BT_GATT_ENFORCE_CHANGE_UNAWARE |
GATT Enforce change-unaware state |
CONFIG_BT_GATT_READ_MULTIPLE |
GATT Read Multiple Characteristic Values support |
CONFIG_BT_H4 |
H:4 UART |
CONFIG_BT_H5 |
H:5 UART [EXPERIMENTAL] |
CONFIG_BT_HAS_HCI_VS |
|
CONFIG_BT_HCI |
HCI-based |
CONFIG_BT_HCI_ACL_FLOW_CONTROL |
Controller to Host ACL flow control support |
CONFIG_BT_HCI_CMD_COUNT |
Number of HCI command buffers |
CONFIG_BT_HCI_HOST |
|
CONFIG_BT_HCI_MESH_EXT |
Mesh HCI Command support |
CONFIG_BT_HCI_RAW |
RAW HCI access |
CONFIG_BT_HCI_RESERVE |
|
CONFIG_BT_HCI_TX_PRIO |
|
CONFIG_BT_HCI_TX_STACK_SIZE |
|
CONFIG_BT_HCI_VS |
Zephyr HCI Vendor-Specific Commands |
CONFIG_BT_HCI_VS_EXT |
Zephyr HCI Vendor-Specific Extensions |
CONFIG_BT_HCI_VS_EXT_DETECT |
Use heuristics to guess HCI vendor extensions support in advance |
CONFIG_BT_HFP_HF |
Bluetooth Handsfree profile HF Role support [EXPERIMENTAL] |
CONFIG_BT_HOST_CRYPTO |
|
CONFIG_BT_ID_MAX |
Maximum number of local identities |
CONFIG_BT_L2CAP_DYNAMIC_CHANNEL |
L2CAP Dynamic Channel support |
CONFIG_BT_L2CAP_RX_MTU |
Maximum supported L2CAP MTU for incoming data |
CONFIG_BT_L2CAP_TX_BUF_COUNT |
Number of L2CAP TX buffers |
CONFIG_BT_L2CAP_TX_FRAG_COUNT |
Number of L2CAP TX fragment buffers |
CONFIG_BT_L2CAP_TX_MTU |
Maximum supported L2CAP MTU for L2CAP TX buffers |
CONFIG_BT_LLL_VENDOR_NORDIC |
Use Nordic LLL |
CONFIG_BT_LL_SW |
Software-based BLE Link Layer |
CONFIG_BT_LL_SW_SPLIT |
Software-based BLE Link Layer (ULL/LLL split) |
CONFIG_BT_LOG_LEVEL |
|
CONFIG_BT_LOG_LEVEL_DBG |
Debug |
CONFIG_BT_LOG_LEVEL_ERR |
Error |
CONFIG_BT_LOG_LEVEL_INF |
Info |
CONFIG_BT_LOG_LEVEL_OFF |
Off |
CONFIG_BT_LOG_LEVEL_WRN |
Warning |
CONFIG_BT_MAX_CONN |
Maximum number of simultaneous connections |
CONFIG_BT_MAX_PAIRED |
Maximum number of paired devices |
CONFIG_BT_MAX_SCO_CONN |
Maximum number of simultaneous SCO connections |
CONFIG_BT_MESH |
Bluetooth Mesh support |
CONFIG_BT_MESH_ADV_BUF_COUNT |
Number of advertising buffers |
CONFIG_BT_MESH_APP_KEY_COUNT |
Maximum number of application keys per network |
CONFIG_BT_MESH_CFG_CLI |
Support for Configuration Client Model |
CONFIG_BT_MESH_CRPL |
Maximum capacity of the replay protection list |
CONFIG_BT_MESH_DEBUG |
Enable debug logs |
CONFIG_BT_MESH_DEBUG_ACCESS |
Access layer debug |
CONFIG_BT_MESH_DEBUG_ADV |
Advertising debug |
CONFIG_BT_MESH_DEBUG_BEACON |
Beacon debug |
CONFIG_BT_MESH_DEBUG_CRYPTO |
Crypto debug |
CONFIG_BT_MESH_DEBUG_FRIEND |
Friend debug |
CONFIG_BT_MESH_DEBUG_LOW_POWER |
Low Power debug |
CONFIG_BT_MESH_DEBUG_MODEL |
Foundation model debug |
CONFIG_BT_MESH_DEBUG_NET |
Network layer debug |
CONFIG_BT_MESH_DEBUG_PROV |
Provisioning debug |
CONFIG_BT_MESH_DEBUG_PROXY |
Proxy debug |
CONFIG_BT_MESH_DEBUG_SETTINGS |
Persistent settings debug |
CONFIG_BT_MESH_DEBUG_TRANS |
Transport layer debug |
CONFIG_BT_MESH_DEBUG_USE_ID_ADDR |
Use identity address for all advertising |
CONFIG_BT_MESH_FRIEND |
Support for acting as a Friend Node |
CONFIG_BT_MESH_FRIEND_LPN_COUNT |
Number of supported LPN nodes |
CONFIG_BT_MESH_FRIEND_QUEUE_SIZE |
Minimum number of buffers supported per Friend Queue |
CONFIG_BT_MESH_FRIEND_RECV_WIN |
Friend Receive Window |
CONFIG_BT_MESH_FRIEND_SEG_RX |
Number of incomplete segment lists per LPN |
CONFIG_BT_MESH_FRIEND_SUB_LIST_SIZE |
Friend Subscription List Size |
CONFIG_BT_MESH_GATT_PROXY |
GATT Proxy Service |
CONFIG_BT_MESH_HEALTH_CLI |
Support for Health Client Model |
CONFIG_BT_MESH_IVU_DIVIDER |
Divider for IV Update state refresh timer |
CONFIG_BT_MESH_IV_UPDATE_TEST |
Test the IV Update Procedure |
CONFIG_BT_MESH_LABEL_COUNT |
Maximum number of Label UUIDs used for Virtual Addresses |
CONFIG_BT_MESH_LOW_POWER |
Support for Low Power features |
CONFIG_BT_MESH_LPN_AUTO |
Automatically start looking for Friend nodes once provisioned |
CONFIG_BT_MESH_LPN_AUTO_TIMEOUT |
Time from last received message before going to LPN mode |
CONFIG_BT_MESH_LPN_ESTABLISHMENT |
Perform Friendship establishment using low power |
CONFIG_BT_MESH_LPN_GROUPS |
Number of groups the LPN can subscribe to |
CONFIG_BT_MESH_LPN_INIT_POLL_TIMEOUT |
The starting value of the PollTimeout timer |
CONFIG_BT_MESH_LPN_MIN_QUEUE_SIZE |
Minimum size of acceptable friend queue (MinQueueSizeLog) |
CONFIG_BT_MESH_LPN_POLL_TIMEOUT |
The value of the PollTimeout timer |
CONFIG_BT_MESH_LPN_RECV_DELAY |
Receive delay requested by the local node |
CONFIG_BT_MESH_LPN_RECV_WIN_FACTOR |
ReceiveWindowFactor, used in the Friend Offer Delay calculation |
CONFIG_BT_MESH_LPN_RETRY_TIMEOUT |
Retry timeout for Friend requests |
CONFIG_BT_MESH_LPN_RSSI_FACTOR |
RSSIFactor, used in the Friend Offer Delay calculation |
CONFIG_BT_MESH_LPN_SCAN_LATENCY |
Latency for enabling scanning |
CONFIG_BT_MESH_MODEL_GROUP_COUNT |
Maximum number of group address subscriptions per model |
CONFIG_BT_MESH_MODEL_KEY_COUNT |
Maximum number of application keys per model |
CONFIG_BT_MESH_MSG_CACHE_SIZE |
Network message cache size |
CONFIG_BT_MESH_NODE_ID_TIMEOUT |
Node Identity advertising timeout |
CONFIG_BT_MESH_PB_ADV |
Provisioning support using the advertising bearer (PB-ADV) |
CONFIG_BT_MESH_PB_GATT |
Provisioning support using GATT (PB-GATT) |
CONFIG_BT_MESH_PROV |
|
CONFIG_BT_MESH_PROXY |
|
CONFIG_BT_MESH_PROXY_FILTER_SIZE |
Maximum number of filter entries per Proxy Client |
CONFIG_BT_MESH_RELAY |
Relay support |
CONFIG_BT_MESH_RPL_STORE_TIMEOUT |
Minimum frequency that the RPL gets updated in storage |
CONFIG_BT_MESH_RX_SDU_MAX |
Maximum incoming Upper Transport Access PDU length |
CONFIG_BT_MESH_RX_SEG_MSG_COUNT |
Maximum number of simultaneous incoming segmented messages |
CONFIG_BT_MESH_SELF_TEST |
Perform self-tests |
CONFIG_BT_MESH_SEQ_STORE_RATE |
How often the sequence number gets updated in storage |
CONFIG_BT_MESH_SHELL |
Enable Bluetooth Mesh shell |
CONFIG_BT_MESH_STORE_TIMEOUT |
Delay (in seconds) before storing anything persistently |
CONFIG_BT_MESH_SUBNET_COUNT |
Maximum number of mesh subnets per network |
CONFIG_BT_MESH_TX_SEG_MAX |
Maximum number of segments in outgoing messages |
CONFIG_BT_MESH_TX_SEG_MSG_COUNT |
Maximum number of simultaneous outgoing segmented messages |
CONFIG_BT_MONITOR_ON_DEV_NAME |
Device Name of Bluetooth monitor logging UART |
CONFIG_BT_NO_DRIVER |
No default HCI driver |
CONFIG_BT_NRF51_PM |
nRF51 Power Management [EXPERIMENTAL] |
CONFIG_BT_OBSERVER |
Observer Role support |
CONFIG_BT_PAGE_TIMEOUT |
Bluetooth Page Timeout |
CONFIG_BT_PERIPHERAL |
Peripheral Role support |
CONFIG_BT_PERIPHERAL_PREF_MAX_INT |
Peripheral preferred maximum connection interval in 1.25ms units |
CONFIG_BT_PERIPHERAL_PREF_MIN_INT |
Peripheral preferred minimum connection interval in 1.25ms units |
CONFIG_BT_PERIPHERAL_PREF_SLAVE_LATENCY |
Peripheral preferred slave latency in Connection Intervals |
CONFIG_BT_PERIPHERAL_PREF_TIMEOUT |
Peripheral preferred supervision timeout in 10ms units |
CONFIG_BT_PHY_UPDATE |
PHY Update |
CONFIG_BT_PRIVACY |
Privacy Feature |
CONFIG_BT_RECV_IS_RX_THREAD |
|
CONFIG_BT_RFCOMM |
Bluetooth RFCOMM protocol support [EXPERIMENTAL] |
CONFIG_BT_RFCOMM_L2CAP_MTU |
L2CAP MTU for RFCOMM frames |
CONFIG_BT_RPA |
|
CONFIG_BT_RPA_TIMEOUT |
Resolvable Private Address timeout |
CONFIG_BT_RX_BUF_COUNT |
Number of HCI RX buffers |
CONFIG_BT_RX_BUF_LEN |
Maximum supported HCI RX buffer length |
CONFIG_BT_RX_PRIO |
|
CONFIG_BT_RX_STACK_SIZE |
Size of the receiving thread stack |
CONFIG_BT_SCAN_WITH_IDENTITY |
Perform active scanning using local identity address |
CONFIG_BT_SETTINGS |
Store Bluetooth state and configuration persistently |
CONFIG_BT_SETTINGS_CCC_STORE_ON_WRITE |
Store CCC value immediately after it has been written |
CONFIG_BT_SHELL |
Enable Bluetooth shell |
CONFIG_BT_SIGNING |
Data signing support |
CONFIG_BT_SMP |
Security Manager Protocol support |
CONFIG_BT_SMP_ENFORCE_MITM |
Enforce MITM protection |
CONFIG_BT_SMP_FORCE_BREDR |
Force Bluetooth SMP over BR/EDR |
CONFIG_BT_SMP_SC_ONLY |
Secure Connections Only Mode |
CONFIG_BT_SMP_SC_PAIR_ONLY |
Disable legacy pairing |
CONFIG_BT_SMP_SELFTEST |
Bluetooth SMP self tests executed on init |
CONFIG_BT_SPI |
SPI HCI |
CONFIG_BT_SPI_BLUENRG |
Enable compatibility with BlueNRG-based devices |
CONFIG_BT_TESTING |
Bluetooth Testing |
CONFIG_BT_TINYCRYPT_ECC |
Use TinyCrypt library for ECDH |
CONFIG_BT_TMP |
Temporary Role |
CONFIG_BT_TMP_MAX |
Temporary Role Max. Instances |
CONFIG_BT_TMP_TX_COUNT_MAX |
Temporary Role Max. Tx buffers |
CONFIG_BT_TMP_TX_SIZE_MAX |
Temporary Role Max. Tx buffer size |
CONFIG_BT_UART |
|
CONFIG_BT_UART_ON_DEV_NAME |
Device Name of UART Device for Bluetooth |
CONFIG_BT_USERCHAN |
HCI User Channel based driver |
CONFIG_BT_USE_DEBUG_KEYS |
Enable Security Manager Debug Mode |
CONFIG_BT_WAIT_NOP |
Wait for “NOP” Command Complete event during init |
CONFIG_BUILD_NO_GAP_FILL |
Don’t fill gaps in generated hex/bin/s19 files. |
CONFIG_BUILD_OUTPUT_BIN |
Build a binary in BIN format |
CONFIG_BUILD_OUTPUT_EXE |
Build a binary in ELF format with .exe extension |
CONFIG_BUILD_OUTPUT_HEX |
Build a binary in HEX format |
CONFIG_BUILD_OUTPUT_S19 |
Build a binary in S19 format |
CONFIG_BUILD_OUTPUT_STRIPPED |
Build a stripped binary |
CONFIG_BUILTIN_STACK_GUARD |
Thread Stack Guards based on built-in ARM stack limit checking |
CONFIG_CACHE_FLUSHING |
Enable d-cache flushing mechanism / Enable cache flushing mechanism |
CONFIG_CACHE_LINE_SIZE |
Cache line size / Cache line size |
CONFIG_CACHE_LINE_SIZE_DETECT |
Detect d-cache line size at runtime / Detect cache line size at runtime |
CONFIG_CAN |
CAN Drivers |
CONFIG_CAN_1 |
Enable CAN 1 |
CONFIG_CAN_INIT_PRIORITY |
CAN driver init priority |
CONFIG_CAN_LOG_LEVEL |
|
CONFIG_CAN_LOG_LEVEL_DBG |
Debug |
CONFIG_CAN_LOG_LEVEL_ERR |
Error |
CONFIG_CAN_LOG_LEVEL_INF |
Info |
CONFIG_CAN_LOG_LEVEL_OFF |
Off |
CONFIG_CAN_LOG_LEVEL_WRN |
Warning |
CONFIG_CAN_MAX_FILTER |
Maximum number of concurrent active filters |
CONFIG_CAN_STM32 |
STM32 CAN Driver |
CONFIG_CAVS_ICTL |
CAVS Interrupt Logic |
CONFIG_CAVS_ICTL_0_NAME |
CAVS 0 Driver name |
CONFIG_CAVS_ICTL_0_OFFSET |
Parent interrupt number to which CAVS_0 maps |
CONFIG_CAVS_ICTL_1_NAME |
CAVS 1 Driver name |
CONFIG_CAVS_ICTL_1_OFFSET |
Parent interrupt number to which CAVS_1 maps |
CONFIG_CAVS_ICTL_2_NAME |
CAVS 2 Driver name |
CONFIG_CAVS_ICTL_2_OFFSET |
Parent interrupt number to which CAVS_2 maps |
CONFIG_CAVS_ICTL_3_NAME |
CAVS 3 Driver name |
CONFIG_CAVS_ICTL_3_OFFSET |
Parent interrupt number to which CAVS_3 maps |
CONFIG_CAVS_ICTL_INIT_PRIORITY |
CAVS ICTL Init priority |
CONFIG_CAVS_ISR_TBL_OFFSET |
Offset in the SW ISR Table |
CONFIG_CBOR_ENCODER_NO_CHECK_USER |
No encoder checks for user args for validity |
CONFIG_CBOR_FLOATING_POINT |
Floating point support |
CONFIG_CBOR_HALF_FLOAT_TYPE |
Half float type support |
CONFIG_CBOR_NO_DFLT_READER |
No default reader support |
CONFIG_CBOR_NO_DFLT_WRITER |
No default writer support |
CONFIG_CBOR_PARSER_MAX_RECURSIONS |
Parser max recursions |
CONFIG_CBOR_PARSER_NO_STRICT_CHECKS |
No strict parser checks |
CONFIG_CBOR_PRETTY_PRINTING |
Implement pretty printing functionality |
CONFIG_CBOR_WITHOUT_OPEN_MEMSTREAM |
Without open memstream |
CONFIG_CC3220SF_DEBUG |
Prepend debug header, disabling flash verification |
CONFIG_CCS811 |
CCS811 Digital Gas Sensor |
CONFIG_CCS811_GPIO_DEV_NAME |
GPIO device |
CONFIG_CCS811_GPIO_RESET |
Enable GPIO Reset for CCS811 |
CONFIG_CCS811_GPIO_RESET_PIN_NUM |
GPIO Reset pin number |
CONFIG_CCS811_GPIO_WAKEUP |
Enable GPIO Wakeup for CCS811 |
CONFIG_CCS811_GPIO_WAKEUP_PIN_NUM |
GPIO Wakeup pin number |
CONFIG_CDC_ACM_BULK_EP_MPS |
|
CONFIG_CDC_ACM_INTERRUPT_EP_MPS |
|
CONFIG_CDC_ACM_PORT_1 |
Enable virtual port 1 |
CONFIG_CDC_ACM_PORT_NAME_0 |
CDC ACM class device driver port name |
CONFIG_CDC_ACM_PORT_NAME_1 |
CDC ACM class device driver port name |
CONFIG_CDC_ECM_BULK_EP_MPS |
|
CONFIG_CDC_ECM_INTERRUPT_EP_MPS |
|
CONFIG_CDC_EEM_BULK_EP_MPS |
|
CONFIG_CFB_LOG_LEVEL |
|
CONFIG_CFB_LOG_LEVEL_DBG |
Debug |
CONFIG_CFB_LOG_LEVEL_ERR |
Error |
CONFIG_CFB_LOG_LEVEL_INF |
Info |
CONFIG_CFB_LOG_LEVEL_OFF |
Off |
CONFIG_CFB_LOG_LEVEL_WRN |
Warning |
CONFIG_CHARACTER_FRAMEBUFFER |
Character framebuffer for dot matrix displays |
CONFIG_CHARACTER_FRAMEBUFFER_SHELL |
Character Framebuffer shell |
CONFIG_CHARACTER_FRAMEBUFFER_SHELL_DRIVER_NAME |
|
CONFIG_CHARACTER_FRAMEBUFFER_USE_DEFAULT_FONTS |
Use default fonts |
CONFIG_CHECK_LINK_MAP |
Check linker map |
CONFIG_CLFLUSH_DETECT |
Detect support of CLFLUSH instruction at runtime |
CONFIG_CLFLUSH_INSTRUCTION_SUPPORTED |
CLFLUSH instruction supported |
CONFIG_CLOCK_CONTROL |
Hardware clock controller support |
CONFIG_CLOCK_CONTROL_BEETLE |
BEETLE Clock Control |
CONFIG_CLOCK_CONTROL_BEETLE_DEVICE_INIT_PRIORITY |
Clock Control Device Priority |
CONFIG_CLOCK_CONTROL_BEETLE_ENABLE_PLL |
Enable PLL on Beetle |
CONFIG_CLOCK_CONTROL_IMX_CCM |
|
CONFIG_CLOCK_CONTROL_LOG_LEVEL |
|
CONFIG_CLOCK_CONTROL_LOG_LEVEL_DBG |
Debug |
CONFIG_CLOCK_CONTROL_LOG_LEVEL_ERR |
Error |
CONFIG_CLOCK_CONTROL_LOG_LEVEL_INF |
Info |
CONFIG_CLOCK_CONTROL_LOG_LEVEL_OFF |
Off |
CONFIG_CLOCK_CONTROL_LOG_LEVEL_WRN |
Warning |
CONFIG_CLOCK_CONTROL_MCUX_CCM |
MCUX CCM driver |
CONFIG_CLOCK_CONTROL_MCUX_SIM |
MCUX SIM driver |
CONFIG_CLOCK_CONTROL_NRF |
NRF Clock controller support |
CONFIG_CLOCK_CONTROL_NRF_FORCE_ALT |
|
CONFIG_CLOCK_CONTROL_NRF_K32SRC_100PPM |
76 ppm to 100 ppm |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_150PPM |
101 ppm to 150 ppm |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_20PPM |
0 ppm to 20 ppm |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_250PPM |
151 ppm to 250 ppm |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_30PPM |
21 ppm to 30 ppm |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_500PPM |
251 ppm to 500 ppm |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_50PPM |
31 ppm to 50 ppm |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_75PPM |
51 ppm to 75 ppm |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_BLOCKING |
Blocking 32KHz crystal oscillator startup |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC |
RC Oscillator |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL |
Crystal Oscillator |
CONFIG_CLOCK_CONTROL_QUARK_SE |
Quark SE Clock controller support |
CONFIG_CLOCK_CONTROL_QUARK_SE_EXTERNAL |
Quark SE external clock support |
CONFIG_CLOCK_CONTROL_QUARK_SE_EXTERNAL_DRV_NAME |
Quark SE external clock device name |
CONFIG_CLOCK_CONTROL_QUARK_SE_PERIPHERAL |
Quark SE peripheral clock support |
CONFIG_CLOCK_CONTROL_QUARK_SE_PERIPHERAL_DRV_NAME |
Quark SE peripheral clock device name |
CONFIG_CLOCK_CONTROL_QUARK_SE_SENSOR |
Quark SE sensor clock support |
CONFIG_CLOCK_CONTROL_QUARK_SE_SENSOR_DRV_NAME |
Quark SE sensor clock device name |
CONFIG_CLOCK_CONTROL_RV32M1_PCC |
RV32M1 PCC driver |
CONFIG_CLOCK_CONTROL_STM32_CUBE |
STM32 Reset & Clock Control |
CONFIG_CLOCK_CONTROL_STM32_DEVICE_INIT_PRIORITY |
Clock Control Device Priority |
CONFIG_CLOCK_STM32_AHB_PRESCALER |
AHB prescaler |
CONFIG_CLOCK_STM32_APB1_PRESCALER |
APB1 prescaler |
CONFIG_CLOCK_STM32_APB2_PRESCALER |
APB2 prescaler |
CONFIG_CLOCK_STM32_HSE_BYPASS |
HSE bypass |
CONFIG_CLOCK_STM32_HSE_CLOCK |
HSE clock value |
CONFIG_CLOCK_STM32_LSE |
Low-speed external clock |
CONFIG_CLOCK_STM32_MCO1_DIV |
MCO1 prescaler |
CONFIG_CLOCK_STM32_MCO1_SRC_HSE |
HSE |
CONFIG_CLOCK_STM32_MCO1_SRC_HSI |
HSI |
CONFIG_CLOCK_STM32_MCO1_SRC_LSE |
LSE |
CONFIG_CLOCK_STM32_MCO1_SRC_NOCLOCK |
NOCLOCK |
CONFIG_CLOCK_STM32_MCO1_SRC_PLLCLK |
PLLCLK |
CONFIG_CLOCK_STM32_MCO2_DIV |
MCO2 prescaler |
CONFIG_CLOCK_STM32_MCO2_SRC_HSE |
HSE |
CONFIG_CLOCK_STM32_MCO2_SRC_NOCLOCK |
NOCLOCK |
CONFIG_CLOCK_STM32_MCO2_SRC_PLLCLK |
PLLCLK |
CONFIG_CLOCK_STM32_MCO2_SRC_PLLI2S |
PLLI2S |
CONFIG_CLOCK_STM32_MCO2_SRC_SYSCLK |
SYSCLK |
CONFIG_CLOCK_STM32_MSI_PLL_MODE |
MSI PLL MODE |
CONFIG_CLOCK_STM32_MSI_RANGE |
MSI frequency range |
CONFIG_CLOCK_STM32_PLL2_MULTIPLIER |
PLL2 multiplier |
CONFIG_CLOCK_STM32_PLL2_PREDIV2 |
PREDIV2 Prescaler |
CONFIG_CLOCK_STM32_PLL_DIVISOR |
PLL divisor |
CONFIG_CLOCK_STM32_PLL_MULTIPLIER |
PLL multiplier / PLL multiplier / PLL multiplier / PLL multiplier |
CONFIG_CLOCK_STM32_PLL_M_DIVISOR |
Division factor for PLL VCO input clock / Division factor for PLL VCO input clock / PLL divisor |
CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER |
Multiplier factor for PLL VCO output clock / Multiplier factor for PLL VCO output clock / PLL multiplier |
CONFIG_CLOCK_STM32_PLL_PREDIV |
PREDIV Prescaler / PREDIV Prescaler |
CONFIG_CLOCK_STM32_PLL_PREDIV1 |
PREDIV1 Prescaler / PREDIV1 Prescaler |
CONFIG_CLOCK_STM32_PLL_P_DIVISOR |
PLL division factor for main system clock / PLL division factor for main system clock / PLL P Divisor |
CONFIG_CLOCK_STM32_PLL_Q_DIVISOR |
PLL division factor for USB OTG FS, SDIO and RNG clocks / Division factor for OTG FS, SDIO and RNG clocks / PLL Q Divisor |
CONFIG_CLOCK_STM32_PLL_R_DIVISOR |
PLL R Divisor |
CONFIG_CLOCK_STM32_PLL_SRC_HSE |
HSE |
CONFIG_CLOCK_STM32_PLL_SRC_HSI |
HSI |
CONFIG_CLOCK_STM32_PLL_SRC_MSI |
MSI |
CONFIG_CLOCK_STM32_PLL_SRC_PLL2 |
PLL2 |
CONFIG_CLOCK_STM32_PLL_XTPRE |
HSE to PLL /2 prescaler |
CONFIG_CLOCK_STM32_SYSCLK_SRC_HSE |
HSE |
CONFIG_CLOCK_STM32_SYSCLK_SRC_HSI |
HSI |
CONFIG_CLOCK_STM32_SYSCLK_SRC_MSI |
MSI |
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL |
PLL |
CONFIG_CMOV |
|
CONFIG_CMSIS_MAX_THREAD_COUNT |
Maximum thread count in CMSIS RTOS application |
CONFIG_CMSIS_MUTEX_MAX_COUNT |
Maximum mutex count in CMSIS application |
CONFIG_CMSIS_RTOS_V1 |
CMSIS RTOS v1 API |
CONFIG_CMSIS_RTOS_V2 |
CMSIS RTOS v2 API |
CONFIG_CMSIS_SEMAPHORE_MAX_COUNT |
Maximum semaphore count in CMSIS application |
CONFIG_CMSIS_THREAD_MAX_STACK_SIZE |
Max stack size threads can be allocated in CMSIS RTOS application |
CONFIG_CMSIS_TIMER_MAX_COUNT |
Maximum timer count in CMSIS application |
CONFIG_CMSIS_V2_EVT_FLAGS_MAX_COUNT |
Maximum event flags count in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_MEM_SLAB_MAX_COUNT |
Maximum mem slab count in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_MEM_SLAB_MAX_DYNAMIC_SIZE |
Maximum dynamic mem slab/pool size in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_MSGQ_MAX_COUNT |
Maximum message queue count in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_MSGQ_MAX_DYNAMIC_SIZE |
Maximum dynamic message queue size in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_MUTEX_MAX_COUNT |
Maximum mutex count in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_SEMAPHORE_MAX_COUNT |
Maximum semaphore count in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_THREAD_DYNAMIC_MAX_COUNT |
Maximum dynamic thread count in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_THREAD_DYNAMIC_STACK_SIZE |
Dynamic stack size threads are allocated in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_THREAD_MAX_COUNT |
Maximum thread count in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_THREAD_MAX_STACK_SIZE |
Max stack size threads can be allocated in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_TIMER_MAX_COUNT |
Maximum timer count in CMSIS RTOS V2 application |
CONFIG_CMU_HFCLK_HFRCO |
Internal high frequency RC oscillator |
CONFIG_CMU_HFCLK_HFXO |
External high frequency crystal oscillator |
CONFIG_CMU_HFCLK_LFXO |
External low frequency crystal oscillator |
CONFIG_CMU_HFXO_FREQ |
External high frequency oscillator frequency |
CONFIG_CMU_LFXO_FREQ |
External low frequency oscillator frequency |
CONFIG_COAP |
CoAP Support |
CONFIG_COAP_EXTENDED_OPTIONS_LEN |
Support for CoAP extended options |
CONFIG_COAP_EXTENDED_OPTIONS_LEN_VALUE |
CoAP extended options length value |
CONFIG_COAP_INIT_ACK_TIMEOUT_MS |
base length of the random generated initial ACK timeout in ms |
CONFIG_COAP_LOG_LEVEL |
|
CONFIG_COAP_LOG_LEVEL_DBG |
Debug |
CONFIG_COAP_LOG_LEVEL_DEFAULT |
Default |
CONFIG_COAP_LOG_LEVEL_ERR |
Error |
CONFIG_COAP_LOG_LEVEL_INF |
Info |
CONFIG_COAP_LOG_LEVEL_OFF |
Off |
CONFIG_COAP_LOG_LEVEL_WRN |
Warning |
CONFIG_COAP_TEST_API_ENABLE |
Enable test API for CoAP unit tests |
CONFIG_COAP_WELL_KNOWN_BLOCK_WISE |
CoAP ./well-known/core services block wise support |
CONFIG_COAP_WELL_KNOWN_BLOCK_WISE_SIZE |
CoAP ./well-known/core services block wise support |
CONFIG_CODE_DATA_RELOCATION |
Relocate code/data sections |
CONFIG_CODE_DENSITY |
Code Density Option |
CONFIG_CODE_FLEXSPI |
Link code into external FlexSPI-controlled memory |
CONFIG_CODE_FLEXSPI2 |
Link code into internal FlexSPI-controlled memory |
CONFIG_CODE_ITCM |
Link code into internal instruction tightly coupled memory (ITCM) |
CONFIG_COMPILER_OPT |
Custom compiler options |
CONFIG_CONSOLE |
Console drivers |
CONFIG_CONSOLE_GETCHAR |
Character by character input and output |
CONFIG_CONSOLE_GETCHAR_BUFSIZE |
console_getchar() buffer size |
CONFIG_CONSOLE_GETLINE |
Line by line input |
CONFIG_CONSOLE_HANDLER |
Enable console input handler |
CONFIG_CONSOLE_HAS_DRIVER |
|
CONFIG_CONSOLE_INPUT_MAX_LINE_LEN |
Console maximum input line length |
CONFIG_CONSOLE_PUTCHAR_BUFSIZE |
console_putchar() buffer size |
CONFIG_CONSOLE_SUBSYS |
Console subsystem/support routines [EXPERIMENTAL] |
CONFIG_COOP_ENABLED |
|
CONFIG_CORTEX_M_SYSTICK |
Cortex-M SYSTICK timer |
CONFIG_COUNTER |
Counter Drivers |
CONFIG_COUNTER_0_NAME |
QMSI AON Timer Device Name |
CONFIG_COUNTER_IMX_EPIT |
IMX EPIT driver |
CONFIG_COUNTER_IMX_EPIT_1 |
Counter 1 |
CONFIG_COUNTER_IMX_EPIT_2 |
Counter 2 |
CONFIG_COUNTER_LOG_LEVEL |
Counter log level |
CONFIG_COUNTER_MCUX_RTC |
MCUX RTC driver |
CONFIG_COUNTER_NRF_RTC |
|
CONFIG_COUNTER_NRF_TIMER |
|
CONFIG_COUNTER_RTC0 |
Enable Counter on RTC0 |
CONFIG_COUNTER_RTC0_PRESCALER |
RTC prescaler |
CONFIG_COUNTER_RTC1 |
Enable Counter on RTC1 |
CONFIG_COUNTER_RTC1_PRESCALER |
RTC prescaler |
CONFIG_COUNTER_RTC2 |
Enable Counter on RTC2 |
CONFIG_COUNTER_RTC2_PRESCALER |
RTC prescaler |
CONFIG_COUNTER_RTC_STM32 |
STM32 Counter RTC driver |
CONFIG_COUNTER_RTC_STM32_CLOCK_LSE |
LSE |
CONFIG_COUNTER_RTC_STM32_CLOCK_LSI |
LSI |
CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_HIGH |
High |
CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_LOW |
Low |
CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_MEDIUMHIGH |
Medium High |
CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_MEDIUMLOW |
Medium Low |
CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_STRENGTH |
|
CONFIG_COUNTER_TIMER0 |
Enable Counter on TIMER0 |
CONFIG_COUNTER_TIMER0_PRESCALER |
Timer prescaler |
CONFIG_COUNTER_TIMER1 |
Enable Counter on TIMER1 |
CONFIG_COUNTER_TIMER1_PRESCALER |
Timer prescaler |
CONFIG_COUNTER_TIMER2 |
Enable Counter on TIMER2 |
CONFIG_COUNTER_TIMER2_PRESCALER |
Timer prescaler |
CONFIG_COUNTER_TIMER3 |
Enable Counter on TIMER3 |
CONFIG_COUNTER_TIMER3_PRESCALER |
Timer prescaler |
CONFIG_COUNTER_TIMER4 |
Enable Counter on TIMER4 |
CONFIG_COUNTER_TIMER4_PRESCALER |
Timer prescaler |
CONFIG_COVERAGE |
Create coverage data |
CONFIG_COVERAGE_GCOV |
Create Coverage data from hardware platform |
CONFIG_CPLUSPLUS |
Enable C++ support for the application |
CONFIG_CPU_APOLLO_LAKE |
|
CONFIG_CPU_ARCEM4 |
|
CONFIG_CPU_ARCV2 |
|
CONFIG_CPU_ATOM |
|
CONFIG_CPU_CLOCK_FREQ_MHZ |
CPU Clock Frequency in MHz |
CONFIG_CPU_CORTEX |
|
CONFIG_CPU_CORTEX_M |
|
CONFIG_CPU_CORTEX_M0 |
|
CONFIG_CPU_CORTEX_M0PLUS |
|
CONFIG_CPU_CORTEX_M0_HAS_VECTOR_TABLE_REMAP |
|
CONFIG_CPU_CORTEX_M23 |
|
CONFIG_CPU_CORTEX_M3 |
|
CONFIG_CPU_CORTEX_M33 |
|
CONFIG_CPU_CORTEX_M4 |
|
CONFIG_CPU_CORTEX_M7 |
|
CONFIG_CPU_CORTEX_M_HAS_BASEPRI |
|
CONFIG_CPU_CORTEX_M_HAS_CMSE |
|
CONFIG_CPU_CORTEX_M_HAS_PROGRAMMABLE_FAULT_PRIOS |
|
CONFIG_CPU_CORTEX_M_HAS_SPLIM |
|
CONFIG_CPU_CORTEX_M_HAS_VTOR |
|
CONFIG_CPU_EM4_DMIPS |
|
CONFIG_CPU_EM4_FPUDA |
|
CONFIG_CPU_EM4_FPUS |
|
CONFIG_CPU_HAS_ARM_MPU |
|
CONFIG_CPU_HAS_ARM_SAU |
|
CONFIG_CPU_HAS_FPU |
|
CONFIG_CPU_HAS_FPU_DOUBLE_PRECISION |
|
CONFIG_CPU_HAS_MPU |
|
CONFIG_CPU_HAS_NRF_IDAU |
|
CONFIG_CPU_HAS_NXP_MPU |
|
CONFIG_CPU_HAS_SYSTICK |
|
CONFIG_CPU_HAS_TEE |
|
CONFIG_CPU_MINUTEIA |
|
CONFIG_CPU_NIOS2_GEN2 |
|
CONFIG_CRYPTO |
Crypto Drivers [EXPERIMENTAL] |
CONFIG_CRYPTO_ATAES132A |
Atmel ATAES132A 32k AES Serial EEPROM support |
CONFIG_CRYPTO_ATAES132A_DRV_NAME |
Driver’s name |
CONFIG_CRYPTO_ATAES132A_I2C_ADDR |
ATAES132A I2C address |
CONFIG_CRYPTO_ATAES132A_I2C_PORT_NAME |
I2C master controller port name |
CONFIG_CRYPTO_ATAES132A_I2C_SPEED_FAST |
Fast |
CONFIG_CRYPTO_ATAES132A_I2C_SPEED_STANDARD |
Standard |
CONFIG_CRYPTO_INIT_PRIORITY |
Crypto devices init priority |
CONFIG_CRYPTO_LOG_LEVEL |
|
CONFIG_CRYPTO_LOG_LEVEL_DBG |
Debug |
CONFIG_CRYPTO_LOG_LEVEL_ERR |
Error |
CONFIG_CRYPTO_LOG_LEVEL_INF |
Info |
CONFIG_CRYPTO_LOG_LEVEL_OFF |
Off |
CONFIG_CRYPTO_LOG_LEVEL_WRN |
Warning |
CONFIG_CRYPTO_MBEDTLS_SHIM |
Enable mbedTLS shim driver [EXPERIMENTAL] |
CONFIG_CRYPTO_MBEDTLS_SHIM_DRV_NAME |
Device name for mbedTLS Pseudo device |
CONFIG_CRYPTO_MBEDTLS_SHIM_MAX_SESSION |
Maximum of sessions mbedTLS shim driver can handle |
CONFIG_CRYPTO_TINYCRYPT_SHIM |
Enable TinyCrypt shim driver [EXPERIMENTAL] |
CONFIG_CRYPTO_TINYCRYPT_SHIM_DRV_NAME |
Device name for TinyCrypt Pseudo device |
CONFIG_CRYPTO_TINYCRYPT_SHIM_MAX_SESSION |
Maximum of sessions TinyCrypt shim driver can handle |
CONFIG_CUSTOM_LINKER_SCRIPT |
Path to custom linker script |
CONFIG_CUSTOM_RODATA_LD |
Include custom-rodata.ld |
CONFIG_CUSTOM_RWDATA_LD |
Include custom-rwdata.ld |
CONFIG_CUSTOM_SECTIONS_LD |
Include custom-sections.ld |
CONFIG_CUSTOM_SECTION_ALIGN |
Custom Section Align |
CONFIG_CUSTOM_SECTION_MIN_ALIGN_SIZE |
Custom Section Align Size |
CONFIG_DATA_DTCM |
Link data into internal data tightly coupled memory (DTCM) |
CONFIG_DATA_ENDIANNESS_LITTLE |
|
CONFIG_DATA_SEMC |
Link data into external SEMC-controlled memory |
CONFIG_DEBUG |
Build kernel with debugging enabled |
CONFIG_DEBUG_INFO |
Enable system debugging information |
CONFIG_DEBUG_OPTIMIZATIONS |
Optimize debugging experience |
CONFIG_DEVICE_CONFIGURATION_DATA |
Enable device configuration data |
CONFIG_DEVICE_IDLE_PM |
Enable device Idle Power Management |
CONFIG_DEVICE_POWER_MANAGEMENT |
Device power management |
CONFIG_DEVICE_SHELL |
Enable device shell |
CONFIG_DHT |
DHT Temperature and Humidity Sensor |
CONFIG_DHT_CHIP_DHT11 |
DHT11 |
CONFIG_DHT_CHIP_DHT22 |
DHT22 |
CONFIG_DHT_GPIO_DEV_NAME |
GPIO device |
CONFIG_DHT_GPIO_PIN_NUM |
Interrupt GPIO pin number |
CONFIG_DHT_NAME |
Driver name |
CONFIG_DISABLE_SSBD |
Disable Speculative Store Bypass |
CONFIG_DISK_ACCESS |
Enable Disk Interface |
CONFIG_DISK_ACCESS_FLASH |
Flash |
CONFIG_DISK_ACCESS_MAX_VOLUMES |
Maximum Disk Interfaces |
CONFIG_DISK_ACCESS_RAM |
RAM Disk |
CONFIG_DISK_ACCESS_SDHC |
SDHC card over SPI |
CONFIG_DISK_ERASE_BLOCK_SIZE |
Flash device erasable block size in hex |
CONFIG_DISK_FLASH_DEV_NAME |
Flash device name to be used as storage backend |
CONFIG_DISK_FLASH_ERASE_ALIGNMENT |
Flash device erase alignment in hex |
CONFIG_DISK_FLASH_MAX_RW_SIZE |
Flash device max read-write size in decimal |
CONFIG_DISK_FLASH_START |
Flash device start address in hex |
CONFIG_DISK_FLASH_VOLUME_NAME |
Flash mount point or drive name |
CONFIG_DISK_LOG_LEVEL |
|
CONFIG_DISK_LOG_LEVEL_DBG |
Debug |
CONFIG_DISK_LOG_LEVEL_ERR |
Error |
CONFIG_DISK_LOG_LEVEL_INF |
Info |
CONFIG_DISK_LOG_LEVEL_OFF |
Off |
CONFIG_DISK_LOG_LEVEL_WRN |
Warning |
CONFIG_DISK_RAM_VOLUME_NAME |
RAM Disk mount point or drive name |
CONFIG_DISK_RAM_VOLUME_SIZE |
RAM Disk size in kilobytes |
CONFIG_DISK_SDHC_VOLUME_NAME |
SDHC Disk mount point or drive name |
CONFIG_DISK_VOLUME_SIZE |
Flash device volume size in hex |
CONFIG_DISPLAY |
Display Drivers |
CONFIG_DISPLAY_LOG_LEVEL |
|
CONFIG_DISPLAY_LOG_LEVEL_DBG |
Debug |
CONFIG_DISPLAY_LOG_LEVEL_ERR |
Error |
CONFIG_DISPLAY_LOG_LEVEL_INF |
Info |
CONFIG_DISPLAY_LOG_LEVEL_OFF |
Off |
CONFIG_DISPLAY_LOG_LEVEL_WRN |
Warning |
CONFIG_DISPLAY_MCUX_ELCDIF |
MCUX eLCDIF driver |
CONFIG_DMA |
DMA driver Configuration |
CONFIG_DMA_0_IRQ_PRI |
IRQ Priority for DMA Controller 0 |
CONFIG_DMA_0_NAME |
Device name for DMA Controller 0 |
CONFIG_DMA_1_IRQ_PRI |
IRQ Priority for DMA Controller 1 |
CONFIG_DMA_1_NAME |
Device name for DMA Controller 1 |
CONFIG_DMA_2_IRQ_PRI |
IRQ Priority for DMA Controller 2 |
CONFIG_DMA_2_NAME |
Device name for DMA Controller 2 |
CONFIG_DMA_CAVS |
Enable CAVS DMA driver |
CONFIG_DMA_LOG_LEVEL |
|
CONFIG_DMA_LOG_LEVEL_DBG |
Debug |
CONFIG_DMA_LOG_LEVEL_ERR |
Error |
CONFIG_DMA_LOG_LEVEL_INF |
Info |
CONFIG_DMA_LOG_LEVEL_OFF |
Off |
CONFIG_DMA_LOG_LEVEL_WRN |
Warning |
CONFIG_DMA_NIOS2_MSGDMA |
Nios-II Modular Scatter-Gather DMA(MSGDMA) driver |
CONFIG_DMA_QMSI |
Enable QMSI DMA driver |
CONFIG_DMA_SAM_XDMAC |
Atmel SAM DMA (XDMAC) driver |
CONFIG_DMA_STM32F4X |
Enable STM32F4x DMA driver |
CONFIG_DNS_NUM_CONCUR_QUERIES |
Number of simultaneous DNS queries per one DNS context |
CONFIG_DNS_RESOLVER |
DNS resolver |
CONFIG_DNS_RESOLVER_ADDITIONAL_BUF_CTR |
Additional DNS buffers |
CONFIG_DNS_RESOLVER_ADDITIONAL_QUERIES |
Additional DNS queries |
CONFIG_DNS_RESOLVER_LOG_LEVEL |
|
CONFIG_DNS_RESOLVER_LOG_LEVEL_DBG |
Debug |
CONFIG_DNS_RESOLVER_LOG_LEVEL_DEFAULT |
Default |
CONFIG_DNS_RESOLVER_LOG_LEVEL_ERR |
Error |
CONFIG_DNS_RESOLVER_LOG_LEVEL_INF |
Info |
CONFIG_DNS_RESOLVER_LOG_LEVEL_OFF |
Off |
CONFIG_DNS_RESOLVER_LOG_LEVEL_WRN |
Warning |
CONFIG_DNS_RESOLVER_MAX_SERVERS |
Number of DNS server addresses |
CONFIG_DNS_SERVER1 |
DNS server 1 |
CONFIG_DNS_SERVER2 |
DNS server 2 |
CONFIG_DNS_SERVER3 |
DNS server 3 |
CONFIG_DNS_SERVER4 |
DNS server 4 |
CONFIG_DNS_SERVER5 |
DNS server 5 |
CONFIG_DNS_SERVER_IP_ADDRESSES |
Set DNS server IP addresses |
CONFIG_DUMMY_DISPLAY |
Dummy display driver |
CONFIG_DUMMY_DISPLAY_DEV_NAME |
Dummy display device name |
CONFIG_DUMMY_DISPLAY_X_RES |
X resolution for dummy display |
CONFIG_DUMMY_DISPLAY_Y_RES |
Y resolution for dummy display |
CONFIG_DW_ICTL |
Designware Interrupt Controller |
CONFIG_DW_ICTL_INIT_PRIORITY |
Init priority for DW interrupt controller |
CONFIG_DW_ICTL_NAME |
Name for Designware Interrupt Controller |
CONFIG_DW_ICTL_OFFSET |
Parent interrupt number to which DW_ICTL maps |
CONFIG_DW_ISR_TBL_OFFSET |
Offset in the SW ISR Table |
CONFIG_DYNAMIC_INTERRUPTS |
Enable installation of IRQs at runtime |
CONFIG_DYNAMIC_OBJECTS |
Allow kernel objects to be allocated at runtime |
CONFIG_EAGER_FP_SHARING |
|
CONFIG_EARLY_CONSOLE |
Send stdout at the earliest stage possible |
CONFIG_ENABLE_EXTENDED_IBRS |
Enable Extended IBRS |
CONFIG_ENABLE_HID_INT_OUT_EP |
Enable USB HID Device Interrupt OUT Endpoint |
CONFIG_ENTROPY_DEVICE_RANDOM_GENERATOR |
Use entropy driver to generate random numbers |
CONFIG_ENTROPY_ESP32_RNG |
ESP32 entropy number generator driver |
CONFIG_ENTROPY_GENERATOR |
Entropy Drivers |
CONFIG_ENTROPY_HAS_DRIVER |
|
CONFIG_ENTROPY_MCUX_RNGA |
MCUX RNGA driver |
CONFIG_ENTROPY_MCUX_TRNG |
MCUX TRNG driver |
CONFIG_ENTROPY_NAME |
Entropy Device Name |
CONFIG_ENTROPY_NRF5_BIAS_CORRECTION |
Enable bias correction (uniform distribution) |
CONFIG_ENTROPY_NRF5_ISR_POOL_SIZE |
ISR-mode random number pool size |
CONFIG_ENTROPY_NRF5_ISR_THRESHOLD |
ISR-mode random number pool low-water threshold |
CONFIG_ENTROPY_NRF5_PRI |
RNG interrupt priority |
CONFIG_ENTROPY_NRF5_RNG |
nRF5 RNG driver |
CONFIG_ENTROPY_NRF5_THR_POOL_SIZE |
Thread-mode random number pool size |
CONFIG_ENTROPY_NRF5_THR_THRESHOLD |
Thread-mode random number pool low-water threshold |
CONFIG_ENTROPY_NRF_FORCE_ALT |
|
CONFIG_ENTROPY_SAM_RNG |
Atmel SAM MCU Family True Random Number Generator (TRNG) Driver |
CONFIG_ENTROPY_STM32_RNG |
STM32 RNG driver |
CONFIG_EOI_FORWARDING_BUG |
|
CONFIG_ERRNO |
Enable errno support |
CONFIG_ETHERNET_LOG_LEVEL |
|
CONFIG_ETHERNET_LOG_LEVEL_DBG |
Debug |
CONFIG_ETHERNET_LOG_LEVEL_DEFAULT |
Default |
CONFIG_ETHERNET_LOG_LEVEL_ERR |
Error |
CONFIG_ETHERNET_LOG_LEVEL_INF |
Info |
CONFIG_ETHERNET_LOG_LEVEL_OFF |
Off |
CONFIG_ETHERNET_LOG_LEVEL_WRN |
Warning |
CONFIG_ETH_DW |
Synopsys DesignWare Ethernet driver |
CONFIG_ETH_DW_0 |
Synopsys DesignWare Ethernet port 0 |
CONFIG_ETH_DW_0_IRQ_DIRECT |
Direct Hardware Interrupt |
CONFIG_ETH_DW_0_IRQ_PRI |
Controller interrupt priority |
CONFIG_ETH_DW_0_IRQ_SHARED |
Shared IRQ |
CONFIG_ETH_DW_0_NAME |
Driver name |
CONFIG_ETH_DW_SHARED_IRQ |
|
CONFIG_ETH_E1000 |
Intel(R) PRO/1000 Gigabit Ethernet driver |
CONFIG_ETH_ENC28J60 |
ENC28J60C Ethernet Controller |
CONFIG_ETH_ENC28J60_0 |
ENC28J60C Ethernet port 0 |
CONFIG_ETH_ENC28J60_0_FULL_DUPLEX |
ENC28J60 full duplex |
CONFIG_ETH_ENC28J60_0_GPIO_SPI_CS |
Manage SPI CS through a GPIO pin |
CONFIG_ETH_ENC28J60_RX_THREAD_PRIO |
Priority for internal incoming packet handler |
CONFIG_ETH_ENC28J60_RX_THREAD_STACK_SIZE |
Stack size for internal incoming packet handler |
CONFIG_ETH_ENC28J60_TIMEOUT |
IP buffer timeout |
CONFIG_ETH_INIT_PRIORITY |
Ethernet driver init priority |
CONFIG_ETH_MCUX |
MCUX Ethernet driver |
CONFIG_ETH_MCUX_0 |
MCUX Ethernet port 0 |
CONFIG_ETH_MCUX_0_MANUAL_MAC |
Manual MAC address |
CONFIG_ETH_MCUX_0_RANDOM_MAC |
Random MAC address |
CONFIG_ETH_MCUX_0_UNIQUE_MAC |
Stable MAC address |
CONFIG_ETH_MCUX_PHY_EXTRA_DEBUG |
Enable additional detailed PHY debug |
CONFIG_ETH_MCUX_PHY_TICK_MS |
PHY poll period (ms) |
CONFIG_ETH_MCUX_PROMISCUOUS_MODE |
Enable promiscuous mode |
CONFIG_ETH_MCUX_PTP_CLOCK_SRC_HZ |
Frequency of the clock source for the PTP timer |
CONFIG_ETH_MCUX_PTP_RX_BUFFERS |
Size of the RX timestamp ring buffer |
CONFIG_ETH_MCUX_PTP_TX_BUFFERS |
Size of the TX timestamp ring buffer |
CONFIG_ETH_MCUX_RX_BUFFERS |
Number of MCUX RX buffers |
CONFIG_ETH_MCUX_TX_BUFFERS |
Number of MCUX TX buffers |
CONFIG_ETH_NATIVE_POSIX |
Native Posix Ethernet driver |
CONFIG_ETH_NATIVE_POSIX_DEV_NAME |
Host ethernet TUN/TAP device name |
CONFIG_ETH_NATIVE_POSIX_DRV_NAME |
Ethernet driver name |
CONFIG_ETH_NATIVE_POSIX_MAC_ADDR |
MAC address for the interface |
CONFIG_ETH_NATIVE_POSIX_PTP_CLOCK |
PTP clock driver support |
CONFIG_ETH_NATIVE_POSIX_RANDOM_MAC |
Random MAC address |
CONFIG_ETH_NATIVE_POSIX_SETUP_SCRIPT |
Host setup script |
CONFIG_ETH_NATIVE_POSIX_STARTUP_AUTOMATIC |
Start network interface automatically |
CONFIG_ETH_NATIVE_POSIX_STARTUP_SCRIPT |
Host startup script |
CONFIG_ETH_NATIVE_POSIX_STARTUP_SCRIPT_USER |
Username to run the host startup script |
CONFIG_ETH_NIC_MODEL |
|
CONFIG_ETH_SAM_GMAC |
Atmel SAM Ethernet driver |
CONFIG_ETH_SAM_GMAC_BUF_RX_COUNT |
Network RX buffers preallocated by the SAM ETH driver |
CONFIG_ETH_SAM_GMAC_FORCED_QUEUE |
Queue to force the packets to |
CONFIG_ETH_SAM_GMAC_FORCE_QUEUE |
Force all traffic to be routed through a specific queue |
CONFIG_ETH_SAM_GMAC_IRQ_PRI |
Interrupt priority |
CONFIG_ETH_SAM_GMAC_MAC0 |
MAC Address Byte 0 |
CONFIG_ETH_SAM_GMAC_MAC1 |
MAC Address Byte 1 |
CONFIG_ETH_SAM_GMAC_MAC2 |
MAC Address Byte 2 |
CONFIG_ETH_SAM_GMAC_MAC3 |
MAC Address Byte 3 |
CONFIG_ETH_SAM_GMAC_MAC4 |
MAC Address Byte 4 |
CONFIG_ETH_SAM_GMAC_MAC5 |
MAC Address Byte 5 |
CONFIG_ETH_SAM_GMAC_MAC_I2C_DEV_NAME |
I2C bus driver device name |
CONFIG_ETH_SAM_GMAC_MAC_I2C_EEPROM |
Read from an I2C EEPROM |
CONFIG_ETH_SAM_GMAC_MAC_I2C_INT_ADDRESS |
I2C EEPROM internal address |
CONFIG_ETH_SAM_GMAC_MAC_I2C_INT_ADDRESS_SIZE |
I2C EEPROM internal address size |
CONFIG_ETH_SAM_GMAC_MAC_I2C_SLAVE_ADDRESS |
I2C 7-bit EEPROM chip address |
CONFIG_ETH_SAM_GMAC_MAC_MANUAL |
Manual |
CONFIG_ETH_SAM_GMAC_MII |
MII |
CONFIG_ETH_SAM_GMAC_NAME |
Device name |
CONFIG_ETH_SAM_GMAC_PHY_ADDR |
GMAC PHY Address |
CONFIG_ETH_SAM_GMAC_QUEUES |
Number of hardware TX and RX queues |
CONFIG_ETH_SAM_GMAC_RANDOM_MAC |
Random MAC address |
CONFIG_ETH_SAM_GMAC_RMII |
RMII |
CONFIG_ETH_SMSC911X |
SMSC911x/9220 Ethernet driver |
CONFIG_ETH_STELLARIS |
Enable TI Stellaris MCU family ethernet driver. |
CONFIG_ETH_STM32_HAL |
STM32 HAL Ethernet driver |
CONFIG_ETH_STM32_HAL_IRQ_PRI |
Controller interrupt priority |
CONFIG_ETH_STM32_HAL_MAC3 |
MAC Address Byte 3 |
CONFIG_ETH_STM32_HAL_MAC4 |
MAC Address Byte 4 |
CONFIG_ETH_STM32_HAL_MAC5 |
MAC Address Byte 5 |
CONFIG_ETH_STM32_HAL_MII |
Use MII interface |
CONFIG_ETH_STM32_HAL_NAME |
Device name |
CONFIG_ETH_STM32_HAL_PHY_ADDRESS |
Phy address |
CONFIG_ETH_STM32_HAL_RANDOM_MAC |
Random MAC address |
CONFIG_ETH_STM32_HAL_RX_THREAD_PRIO |
RX thread priority |
CONFIG_ETH_STM32_HAL_RX_THREAD_STACK_SIZE |
RX thread stack size |
CONFIG_EXCEPTIONS |
Enable C++ exceptions support |
CONFIG_EXCEPTION_DEBUG |
Unhandled exception debugging |
CONFIG_EXCEPTION_STACK_TRACE |
Attempt to print stack traces upon exceptions |
CONFIG_EXECUTE_XOR_WRITE |
Enable W^X for memory partitions |
CONFIG_EXECUTION_BENCHMARKING |
Timing metrics |
CONFIG_EXTI_STM32 |
External Interrupt/Event Controller (EXTI) Driver for STM32 family of MCUs |
CONFIG_EXTI_STM32_EXTI0_IRQ_PRI |
EXTI0 IRQ priority |
CONFIG_EXTI_STM32_EXTI15_10_IRQ_PRI |
EXTI15:10 IRQ priority |
CONFIG_EXTI_STM32_EXTI15_4_IRQ_PRI |
EXTI15:4 IRQ priority |
CONFIG_EXTI_STM32_EXTI1_0_IRQ_PRI |
EXTI1:0 IRQ priority |
CONFIG_EXTI_STM32_EXTI1_IRQ_PRI |
EXTI1 IRQ priority |
CONFIG_EXTI_STM32_EXTI2_IRQ_PRI |
EXTI2 IRQ priority |
CONFIG_EXTI_STM32_EXTI3_2_IRQ_PRI |
EXTI3:2 IRQ priority |
CONFIG_EXTI_STM32_EXTI3_IRQ_PRI |
EXTI3 IRQ priority |
CONFIG_EXTI_STM32_EXTI4_IRQ_PRI |
EXTI4 IRQ priority |
CONFIG_EXTI_STM32_EXTI9_5_IRQ_PRI |
EXTI9:5 IRQ priority |
CONFIG_EXTI_STM32_LPTIM1_IRQ_PRI |
LPTIM1 IRQ priority |
CONFIG_EXTI_STM32_OTG_FS_WKUP_IRQ_PRI |
USB OTG FS Wake Up IRQ priority |
CONFIG_EXTI_STM32_PVD_IRQ_PRI |
RVD Through IRQ priority |
CONFIG_EXTI_STM32_RTC_WKUP_IRQ_PRI |
RTC Wake Up IRQ priority |
CONFIG_EXTI_STM32_TAMP_STAMP_IRQ_PRI |
Tamper and Timestamp IRQ priority |
CONFIG_EXTRA_EXCEPTION_INFO |
Extra exception debug information |
CONFIG_FAKE_ENTROPY_NATIVE_POSIX |
Native posix entropy driver |
CONFIG_FAT_FILESYSTEM_ELM |
ELM FAT File System |
CONFIG_FAULT_DUMP |
Fault dump level / Fault dump level |
CONFIG_FCB |
Flash Circular Buffer support |
CONFIG_FILE_SYSTEM |
File system support |
CONFIG_FILE_SYSTEM_NFFS |
NFFS file system support |
CONFIG_FILE_SYSTEM_SHELL |
Enable file system shell |
CONFIG_FLASH |
Flash hardware support |
CONFIG_FLASH_BASE_ADDRESS |
Flash Base Address |
CONFIG_FLASH_HAS_DRIVER_ENABLED |
|
CONFIG_FLASH_HAS_PAGE_LAYOUT |
|
CONFIG_FLASH_LOAD_OFFSET |
Kernel load offset |
CONFIG_FLASH_LOAD_SIZE |
Kernel load size |
CONFIG_FLASH_LOG_LEVEL |
|
CONFIG_FLASH_LOG_LEVEL_DBG |
Debug |
CONFIG_FLASH_LOG_LEVEL_ERR |
Error |
CONFIG_FLASH_LOG_LEVEL_INF |
Info |
CONFIG_FLASH_LOG_LEVEL_OFF |
Off |
CONFIG_FLASH_LOG_LEVEL_WRN |
Warning |
CONFIG_FLASH_MAP |
Flash map abstraction module |
CONFIG_FLASH_MAP_CUSTOM |
Custom flash map description |
CONFIG_FLASH_NRF_FORCE_ALT |
|
CONFIG_FLASH_PAGE_LAYOUT |
API for retrieving the layout of pages |
CONFIG_FLASH_PAGE_SIZE |
|
CONFIG_FLASH_SHELL |
Enable Flash shell |
CONFIG_FLASH_SIZE |
Flash Size in kB |
CONFIG_FLOAT |
Floating point |
CONFIG_FNMATCH |
Fnmatch Support |
CONFIG_FORCE_NO_ASSERT |
Force-disable no assertions |
CONFIG_FP_FPU_DA |
|
CONFIG_FP_HARDABI |
Floating point Hard ABI |
CONFIG_FP_SHARING |
Floating point register sharing |
CONFIG_FP_SOFTABI |
Floating point Soft ABI |
CONFIG_FS_FATFS_NUM_DIRS |
Maximum number of opened directories |
CONFIG_FS_FATFS_NUM_FILES |
Maximum number of opened files |
CONFIG_FS_FLASH_STORAGE_PARTITION |
|
CONFIG_FS_LOG_LEVEL |
|
CONFIG_FS_LOG_LEVEL_DBG |
Debug |
CONFIG_FS_LOG_LEVEL_ERR |
Error |
CONFIG_FS_LOG_LEVEL_INF |
Info |
CONFIG_FS_LOG_LEVEL_OFF |
Off |
CONFIG_FS_LOG_LEVEL_WRN |
Warning |
CONFIG_FS_MGMT_DL_CHUNK_SIZE |
Maximum chunk size for file downloads |
CONFIG_FS_MGMT_PATH_SIZE |
Maximum file path length |
CONFIG_FS_MGMT_UL_CHUNK_SIZE |
Maximum chunk size for file uploads |
CONFIG_FS_NFFS_FLASH_DEV_NAME |
Flash device name to be used |
CONFIG_FS_NFFS_NUM_BLOCKS |
Maximum number of blocks |
CONFIG_FS_NFFS_NUM_CACHE_BLOCKS |
Number of cached blocks |
CONFIG_FS_NFFS_NUM_CACHE_INODES |
Number of cached files’ inodes |
CONFIG_FS_NFFS_NUM_DIRS |
Maximum number of opened directories |
CONFIG_FS_NFFS_NUM_FILES |
Maximum number of opened files |
CONFIG_FS_NFFS_NUM_INODES |
Maximum number of inodes |
CONFIG_FXAS21002 |
FXAS21002 gyroscope driver |
CONFIG_FXAS21002_DR |
Output data rate |
CONFIG_FXAS21002_DRDY_INT1 |
Data ready interrupt to INT1 pin |
CONFIG_FXAS21002_RANGE |
Full scale range |
CONFIG_FXAS21002_THREAD_PRIORITY |
Own thread priority |
CONFIG_FXAS21002_THREAD_STACK_SIZE |
Own thread stack size |
CONFIG_FXAS21002_TRIGGER |
|
CONFIG_FXAS21002_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_FXAS21002_TRIGGER_NONE |
No trigger |
CONFIG_FXAS21002_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_FXAS21002_WHOAMI |
WHOAMI value |
CONFIG_FXOS8700 |
FXOS8700 accelerometer/magnetometer driver |
CONFIG_FXOS8700_DRDY_INT1 |
Data ready interrupt to INT1 pin |
CONFIG_FXOS8700_MODE_ACCEL |
Accelerometer-only mode |
CONFIG_FXOS8700_MODE_HYBRID |
Hybrid (accel+mag) mode |
CONFIG_FXOS8700_MODE_MAGN |
Magnetometer-only mode |
CONFIG_FXOS8700_MOTION |
Motion detection |
CONFIG_FXOS8700_MOTION_INT1 |
Motion interrupt to INT1 pin |
CONFIG_FXOS8700_PM_HIGH_RESOLUTION |
High resolution power mode |
CONFIG_FXOS8700_PM_LOW_NOISE_LOW_POWER |
Low noise low power mode |
CONFIG_FXOS8700_PM_LOW_POWER |
Low power mode |
CONFIG_FXOS8700_PM_NORMAL |
Normal power mode |
CONFIG_FXOS8700_PULSE |
Pulse detection |
CONFIG_FXOS8700_PULSE_CFG |
Pulse configuration register |
CONFIG_FXOS8700_PULSE_INT1 |
Pulse interrupt to INT1 pin |
CONFIG_FXOS8700_PULSE_LTCY |
Pulse latency |
CONFIG_FXOS8700_PULSE_THSX |
Pulse X-axis threshold |
CONFIG_FXOS8700_PULSE_THSY |
Pulse Y-axis threshold |
CONFIG_FXOS8700_PULSE_THSZ |
Pulse Z-axis threshold |
CONFIG_FXOS8700_PULSE_TMLT |
Pulse time limit |
CONFIG_FXOS8700_PULSE_WIND |
Pulse window |
CONFIG_FXOS8700_RANGE_2G |
2g (0.244 mg/LSB) |
CONFIG_FXOS8700_RANGE_4G |
4g (0.488 mg/LSB) |
CONFIG_FXOS8700_RANGE_8G |
8g (0.976 mg/LSB) |
CONFIG_FXOS8700_TEMP |
Enable temperature |
CONFIG_FXOS8700_THREAD_PRIORITY |
Own thread priority |
CONFIG_FXOS8700_THREAD_STACK_SIZE |
Own thread stack size |
CONFIG_FXOS8700_TRIGGER |
|
CONFIG_FXOS8700_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_FXOS8700_TRIGGER_NONE |
No trigger |
CONFIG_FXOS8700_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_GDT_DYNAMIC |
Store GDT in RAM so that it can be modified |
CONFIG_GEN_IRQ_START_VECTOR |
|
CONFIG_GEN_IRQ_VECTOR_TABLE |
Generate an interrupt vector table |
CONFIG_GEN_ISR_TABLES |
Use generated IRQ tables |
CONFIG_GEN_SW_ISR_TABLE |
Generate a software ISR table |
CONFIG_GPIO |
GPIO Drivers |
CONFIG_GPIO_ALTERA_NIOS2 |
Altera Nios-II PIO Controllers |
CONFIG_GPIO_ALTERA_NIOS2_OUTPUT |
Enable driver for Altera Nios-II PIO Output Port |
CONFIG_GPIO_ALTERA_NIOS2_OUTPUT_DEV_NAME |
Device name for Output Port |
CONFIG_GPIO_AS_PINRESET |
GPIO as pin reset (reset button) / GPIO as pin reset (reset button) |
CONFIG_GPIO_ATMEL_SAM3 |
Atmel SAM3 PIO Controllers |
CONFIG_GPIO_ATMEL_SAM3_PORTA |
Enable driver for Atmel SAM3 PIO Port A |
CONFIG_GPIO_ATMEL_SAM3_PORTA_DEV_NAME |
Device name for Port A |
CONFIG_GPIO_ATMEL_SAM3_PORTA_IRQ_PRI |
Interrupt Priority for Port A |
CONFIG_GPIO_ATMEL_SAM3_PORTB |
Enable driver for Atmel SAM3 PIO Port B |
CONFIG_GPIO_ATMEL_SAM3_PORTB_DEV_NAME |
Device name for Port B |
CONFIG_GPIO_ATMEL_SAM3_PORTB_IRQ_PRI |
Interrupt Priority for Port B |
CONFIG_GPIO_ATMEL_SAM3_PORTC |
Enable driver for Atmel SAM3 PIO Port C |
CONFIG_GPIO_ATMEL_SAM3_PORTC_DEV_NAME |
Device name for Port C |
CONFIG_GPIO_ATMEL_SAM3_PORTC_IRQ_PRI |
Interrupt Priority for Port C |
CONFIG_GPIO_ATMEL_SAM3_PORTD |
Enable driver for Atmel SAM3 PIO Port D |
CONFIG_GPIO_ATMEL_SAM3_PORTD_DEV_NAME |
Device name for Port D |
CONFIG_GPIO_ATMEL_SAM3_PORTD_IRQ_PRI |
Interrupt Priority for Port D |
CONFIG_GPIO_A_STELLARIS |
Enable GPIO port A support |
CONFIG_GPIO_B_STELLARIS |
Enable GPIO port B support |
CONFIG_GPIO_CC2650 |
TI CC2650 GPIO driver |
CONFIG_GPIO_CC2650_INIT_PRIO |
GPIO driver initialization priority. |
CONFIG_GPIO_CC2650_NAME |
GPIO driver name. |
CONFIG_GPIO_CC32XX |
TI CC32XX GPIO driver |
CONFIG_GPIO_CC32XX_A0 |
GPIO block A0 |
CONFIG_GPIO_CC32XX_A1 |
GPIO block A1 |
CONFIG_GPIO_CC32XX_A2 |
GPIO block A2 |
CONFIG_GPIO_CC32XX_A3 |
GPIO block A3 |
CONFIG_GPIO_CMSDK_AHB |
ARM CMSDK (Cortex-M System Design Kit) AHB GPIO Controllers |
CONFIG_GPIO_CMSDK_AHB_PORT0 |
Enable driver for GPIO Port 0 |
CONFIG_GPIO_CMSDK_AHB_PORT0_DEV_NAME |
Device name for Port 0 |
CONFIG_GPIO_CMSDK_AHB_PORT0_IRQ_PRI |
Interrupt Priority for Port 0 |
CONFIG_GPIO_CMSDK_AHB_PORT1 |
Enable driver for GPIO Port 1 |
CONFIG_GPIO_CMSDK_AHB_PORT1_DEV_NAME |
Device name for Port 1 |
CONFIG_GPIO_CMSDK_AHB_PORT1_IRQ_PRI |
Interrupt Priority for Port 1 |
CONFIG_GPIO_CMSDK_AHB_PORT2 |
Enable driver for GPIO Port 2 |
CONFIG_GPIO_CMSDK_AHB_PORT2_DEV_NAME |
Device name for Port 2 |
CONFIG_GPIO_CMSDK_AHB_PORT2_IRQ_PRI |
Interrupt Priority for Port 2 |
CONFIG_GPIO_CMSDK_AHB_PORT3 |
Enable driver for GPIO Port 3 |
CONFIG_GPIO_CMSDK_AHB_PORT3_DEV_NAME |
Device name for Port 3 |
CONFIG_GPIO_CMSDK_AHB_PORT3_IRQ_PRI |
Interrupt Priority for Port 3 |
CONFIG_GPIO_C_STELLARIS |
Enable GPIO port C support |
CONFIG_GPIO_DW |
Designware GPIO |
CONFIG_GPIO_DW_0 |
Designware GPIO block 0 |
CONFIG_GPIO_DW_0_CLOCK_GATE_SUBSYS |
Clock controller’s subsystem |
CONFIG_GPIO_DW_0_IRQ_DIRECT |
Direct Hardware Interrupt |
CONFIG_GPIO_DW_0_IRQ_PRI |
Controller interrupt priority |
CONFIG_GPIO_DW_0_IRQ_SHARED |
Shared IRQ |
CONFIG_GPIO_DW_0_NAME |
Driver name |
CONFIG_GPIO_DW_1 |
Designware GPIO block 1 |
CONFIG_GPIO_DW_1_CLOCK_GATE_SUBSYS |
Clock controller’s subsystem |
CONFIG_GPIO_DW_1_IRQ_DIRECT |
Direct Hardware Interrupt |
CONFIG_GPIO_DW_1_IRQ_PRI |
Controller interrupt priority |
CONFIG_GPIO_DW_1_IRQ_SHARED |
Shared IRQ |
CONFIG_GPIO_DW_1_NAME |
Driver name |
CONFIG_GPIO_DW_2 |
Designware GPIO block 1 |
CONFIG_GPIO_DW_2_CLOCK_GATE_SUBSYS |
Clock controller’s subsystem |
CONFIG_GPIO_DW_2_IRQ_DIRECT |
Direct Hardware Interrupt |
CONFIG_GPIO_DW_2_IRQ_PRI |
Controller interrupt priority |
CONFIG_GPIO_DW_2_IRQ_SHARED |
Shared IRQ |
CONFIG_GPIO_DW_2_NAME |
Driver name |
CONFIG_GPIO_DW_3 |
Designware GPIO block 1 |
CONFIG_GPIO_DW_3_CLOCK_GATE_SUBSYS |
Clock controller’s subsystem |
CONFIG_GPIO_DW_3_IRQ_DIRECT |
Direct Hardware Interrupt |
CONFIG_GPIO_DW_3_IRQ_PRI |
Controller interrupt priority |
CONFIG_GPIO_DW_3_IRQ_SHARED |
Shared IRQ |
CONFIG_GPIO_DW_3_NAME |
Driver name |
CONFIG_GPIO_DW_CLOCK_GATE |
Enable clock gating |
CONFIG_GPIO_DW_CLOCK_GATE_DRV_NAME |
|
CONFIG_GPIO_DW_INIT_PRIORITY |
Init priority |
CONFIG_GPIO_DW_SHARED_IRQ |
|
CONFIG_GPIO_D_STELLARIS |
Enable GPIO port D support |
CONFIG_GPIO_ESP32 |
ESP32 GPIO |
CONFIG_GPIO_ESP32_0 |
ESP32 GPIO (pins 0-31) |
CONFIG_GPIO_ESP32_0_NAME |
Driver name |
CONFIG_GPIO_ESP32_1 |
ESP32 GPIO (pins 32-39) |
CONFIG_GPIO_ESP32_1_NAME |
Driver name |
CONFIG_GPIO_ESP32_IRQ |
IRQ line for ESP32 GPIO pins |
CONFIG_GPIO_E_STELLARIS |
Enable GPIO port E support |
CONFIG_GPIO_F_STELLARIS |
Enable GPIO port F support |
CONFIG_GPIO_GECKO |
Gecko GPIO driver |
CONFIG_GPIO_GECKO_COMMON_INIT_PRIORITY |
Common initialization priority |
CONFIG_GPIO_GECKO_PORTA |
Port A |
CONFIG_GPIO_GECKO_PORTB |
Port B |
CONFIG_GPIO_GECKO_PORTC |
Port C |
CONFIG_GPIO_GECKO_PORTD |
Port D |
CONFIG_GPIO_GECKO_PORTE |
Port E |
CONFIG_GPIO_GECKO_PORTF |
Port F |
CONFIG_GPIO_G_STELLARIS |
Enable GPIO port G support |
CONFIG_GPIO_IMX |
IMX GPIO driver |
CONFIG_GPIO_IMX_PORT_1 |
Port 1 |
CONFIG_GPIO_IMX_PORT_2 |
Port 2 |
CONFIG_GPIO_IMX_PORT_3 |
Port 3 |
CONFIG_GPIO_IMX_PORT_4 |
Port 4 |
CONFIG_GPIO_IMX_PORT_5 |
Port 5 |
CONFIG_GPIO_IMX_PORT_6 |
Port 6 |
CONFIG_GPIO_IMX_PORT_7 |
Port 7 |
CONFIG_GPIO_INTEL_APL |
Intel Apollo Lake SoC GPIO |
CONFIG_GPIO_INTEL_APL_CHECK_PERMS |
Check permissions before manipulating GPIO |
CONFIG_GPIO_LOG_LEVEL |
|
CONFIG_GPIO_LOG_LEVEL_DBG |
Debug |
CONFIG_GPIO_LOG_LEVEL_ERR |
Error |
CONFIG_GPIO_LOG_LEVEL_INF |
Info |
CONFIG_GPIO_LOG_LEVEL_OFF |
Off |
CONFIG_GPIO_LOG_LEVEL_WRN |
Warning |
CONFIG_GPIO_MCUX |
MCUX GPIO driver |
CONFIG_GPIO_MCUX_IGPIO |
MCUX IGPIO driver |
CONFIG_GPIO_MCUX_IGPIO_1 |
Port 1 |
CONFIG_GPIO_MCUX_IGPIO_2 |
Port 2 |
CONFIG_GPIO_MCUX_IGPIO_3 |
Port 3 |
CONFIG_GPIO_MCUX_IGPIO_4 |
Port 4 |
CONFIG_GPIO_MCUX_IGPIO_5 |
Port 5 |
CONFIG_GPIO_MCUX_LPC |
MCUX LPC GPIO driver |
CONFIG_GPIO_MCUX_LPC_PORT0 |
Port 0 |
CONFIG_GPIO_MCUX_LPC_PORT0_NAME |
Port 0 driver name |
CONFIG_GPIO_MCUX_LPC_PORT1 |
Port 1 |
CONFIG_GPIO_MCUX_LPC_PORT1_NAME |
Port 1 driver name |
CONFIG_GPIO_MCUX_PORTA |
Port A |
CONFIG_GPIO_MCUX_PORTB |
Port B |
CONFIG_GPIO_MCUX_PORTC |
Port C |
CONFIG_GPIO_MCUX_PORTD |
Port D |
CONFIG_GPIO_MCUX_PORTE |
Port E |
CONFIG_GPIO_MMIO32 |
|
CONFIG_GPIO_NRFX |
nRF GPIO driver |
CONFIG_GPIO_NRF_INIT_PRIORITY |
nRF GPIO initialization priority |
CONFIG_GPIO_NRF_P0 |
nRF GPIO Port P0 |
CONFIG_GPIO_NRF_P1 |
nRF GPIO Port P1 |
CONFIG_GPIO_PCAL9535A |
PCAL9535A I2C-based GPIO chip |
CONFIG_GPIO_PCAL9535A_0 |
PCAL9535A GPIO chip #0 |
CONFIG_GPIO_PCAL9535A_0_DEV_NAME |
PCAL9535A GPIO chip #0 Device Name |
CONFIG_GPIO_PCAL9535A_0_I2C_ADDR |
PCAL9535A GPIO chip #0 I2C slave address |
CONFIG_GPIO_PCAL9535A_0_I2C_MASTER_DEV_NAME |
I2C Master where PCAL9535A GPIO chip #0 is connected |
CONFIG_GPIO_PCAL9535A_1 |
PCAL9535A GPIO chip #1 |
CONFIG_GPIO_PCAL9535A_1_DEV_NAME |
PCAL9535A GPIO chip #1 Device Name |
CONFIG_GPIO_PCAL9535A_1_I2C_ADDR |
PCAL9535A GPIO chip #1 I2C slave address |
CONFIG_GPIO_PCAL9535A_1_I2C_MASTER_DEV_NAME |
I2C Master where PCAL9535A GPIO chip #1 is connected |
CONFIG_GPIO_PCAL9535A_2 |
PCAL9535A GPIO chip #2 |
CONFIG_GPIO_PCAL9535A_2_DEV_NAME |
PCAL9535A GPIO chip #2 Device Name |
CONFIG_GPIO_PCAL9535A_2_I2C_ADDR |
PCAL9535A GPIO chip #2 I2C slave address |
CONFIG_GPIO_PCAL9535A_2_I2C_MASTER_DEV_NAME |
I2C Master where PCAL9535A GPIO chip #2 is connected |
CONFIG_GPIO_PCAL9535A_3 |
PCAL9535A GPIO chip #3 |
CONFIG_GPIO_PCAL9535A_3_DEV_NAME |
PCAL9535A GPIO chip #3 Device Name |
CONFIG_GPIO_PCAL9535A_3_I2C_ADDR |
PCAL9535A GPIO chip #3 I2C slave address |
CONFIG_GPIO_PCAL9535A_3_I2C_MASTER_DEV_NAME |
I2C Master where PCAL9535A GPIO chip #3 is connected |
CONFIG_GPIO_PCAL9535A_INIT_PRIORITY |
Init priority |
CONFIG_GPIO_QMSI |
QMSI GPIO driver |
CONFIG_GPIO_QMSI_0 |
QMSI GPIO block 0 |
CONFIG_GPIO_QMSI_0_IRQ_PRI |
|
CONFIG_GPIO_QMSI_1 |
QMSI GPIO block 1 |
CONFIG_GPIO_QMSI_API_REENTRANCY |
GPIO driver API reentrancy |
CONFIG_GPIO_QMSI_INIT_PRIORITY |
Init priority |
CONFIG_GPIO_QMSI_SS |
QMSI GPIO SS driver |
CONFIG_GPIO_QMSI_SS_0 |
QMSI GPIO SS block 0 |
CONFIG_GPIO_QMSI_SS_1 |
QMSI GPIO SS block 1 |
CONFIG_GPIO_RV32M1 |
RV32M1 GPIO driver |
CONFIG_GPIO_RV32M1_PORTA |
Port A |
CONFIG_GPIO_RV32M1_PORTB |
Port B |
CONFIG_GPIO_RV32M1_PORTC |
Port C |
CONFIG_GPIO_RV32M1_PORTD |
Port D |
CONFIG_GPIO_RV32M1_PORTE |
Port E |
CONFIG_GPIO_SAM |
Atmel SAM GPIO (PORT) driver |
CONFIG_GPIO_SAM0 |
Atmel SAM0 GPIO (PORT) driver |
CONFIG_GPIO_SCH |
Intel SCH GPIO controller |
CONFIG_GPIO_SCH_0 |
Enable SCH GPIO port 0 |
CONFIG_GPIO_SCH_0_DEV_NAME |
Name of the device |
CONFIG_GPIO_SCH_1 |
Enable SCH GPIO port 1 |
CONFIG_GPIO_SCH_1_DEV_NAME |
Name of the device |
CONFIG_GPIO_SCH_INIT_PRIORITY |
Init priority |
CONFIG_GPIO_SHELL |
Enable GPIO Shell |
CONFIG_GPIO_SIFIVE |
SiFive Freedom Processor GPIO driver |
CONFIG_GPIO_SIFIVE_0_PRIORITY |
GPIO 0 interrupt priority |
CONFIG_GPIO_SIFIVE_10_PRIORITY |
GPIO 10 interrupt priority |
CONFIG_GPIO_SIFIVE_11_PRIORITY |
GPIO 11 interrupt priority |
CONFIG_GPIO_SIFIVE_12_PRIORITY |
GPIO 12 interrupt priority |
CONFIG_GPIO_SIFIVE_13_PRIORITY |
GPIO 13 interrupt priority |
CONFIG_GPIO_SIFIVE_14_PRIORITY |
GPIO 14 interrupt priority |
CONFIG_GPIO_SIFIVE_15_PRIORITY |
GPIO 15 interrupt priority |
CONFIG_GPIO_SIFIVE_16_PRIORITY |
GPIO 16 interrupt priority |
CONFIG_GPIO_SIFIVE_17_PRIORITY |
GPIO 17 interrupt priority |
CONFIG_GPIO_SIFIVE_18_PRIORITY |
GPIO 18 interrupt priority |
CONFIG_GPIO_SIFIVE_19_PRIORITY |
GPIO 19 interrupt priority |
CONFIG_GPIO_SIFIVE_1_PRIORITY |
GPIO 1 interrupt priority |
CONFIG_GPIO_SIFIVE_20_PRIORITY |
GPIO 20 interrupt priority |
CONFIG_GPIO_SIFIVE_21_PRIORITY |
GPIO 21 interrupt priority |
CONFIG_GPIO_SIFIVE_22_PRIORITY |
GPIO 22 interrupt priority |
CONFIG_GPIO_SIFIVE_23_PRIORITY |
GPIO 23 interrupt priority |
CONFIG_GPIO_SIFIVE_24_PRIORITY |
GPIO 24 interrupt priority |
CONFIG_GPIO_SIFIVE_25_PRIORITY |
GPIO 25 interrupt priority |
CONFIG_GPIO_SIFIVE_26_PRIORITY |
GPIO 26 interrupt priority |
CONFIG_GPIO_SIFIVE_27_PRIORITY |
GPIO 27 interrupt priority |
CONFIG_GPIO_SIFIVE_28_PRIORITY |
GPIO 28 interrupt priority |
CONFIG_GPIO_SIFIVE_29_PRIORITY |
GPIO 29 interrupt priority |
CONFIG_GPIO_SIFIVE_2_PRIORITY |
GPIO 2 interrupt priority |
CONFIG_GPIO_SIFIVE_30_PRIORITY |
GPIO 30 interrupt priority |
CONFIG_GPIO_SIFIVE_31_PRIORITY |
GPIO 31 interrupt priority |
CONFIG_GPIO_SIFIVE_3_PRIORITY |
GPIO 3 interrupt priority |
CONFIG_GPIO_SIFIVE_4_PRIORITY |
GPIO 4 interrupt priority |
CONFIG_GPIO_SIFIVE_5_PRIORITY |
GPIO 5 interrupt priority |
CONFIG_GPIO_SIFIVE_6_PRIORITY |
GPIO 6 interrupt priority |
CONFIG_GPIO_SIFIVE_7_PRIORITY |
GPIO 7 interrupt priority |
CONFIG_GPIO_SIFIVE_8_PRIORITY |
GPIO 8 interrupt priority |
CONFIG_GPIO_SIFIVE_9_PRIORITY |
GPIO 9 interrupt priority |
CONFIG_GPIO_SIFIVE_GPIO_NAME |
GPIO driver name |
CONFIG_GPIO_STELLARIS |
TI Stellaris GPIO Driver |
CONFIG_GPIO_STM32 |
GPIO Driver for STM32 family of MCUs |
CONFIG_GPIO_STM32_PORTA |
Enable GPIO port A support |
CONFIG_GPIO_STM32_PORTB |
Enable GPIO port B support |
CONFIG_GPIO_STM32_PORTC |
Enable GPIO port C support |
CONFIG_GPIO_STM32_PORTD |
Enable GPIO port D support |
CONFIG_GPIO_STM32_PORTE |
Enable GPIO port E support |
CONFIG_GPIO_STM32_PORTF |
Enable GPIO port F support |
CONFIG_GPIO_STM32_PORTG |
Enable GPIO port G support |
CONFIG_GPIO_STM32_PORTH |
Enable GPIO port H support |
CONFIG_GPIO_STM32_PORTI |
Enable GPIO port I support |
CONFIG_GPIO_STM32_PORTJ |
Enable GPIO port J support |
CONFIG_GPIO_STM32_PORTK |
Enable GPIO port K support |
CONFIG_GPIO_SX1509B |
SX1509B I2C GPIO chip |
CONFIG_GPIO_SX1509B_DEV_NAME |
SX1509B GPIO chip Device Name |
CONFIG_GPIO_SX1509B_I2C_ADDR |
SX1509B GPIO chip I2C slave address |
CONFIG_GPIO_SX1509B_I2C_MASTER_DEV_NAME |
I2C Master to which SX1509B GPIO chip is connected |
CONFIG_GPIO_SX1509B_INIT_PRIORITY |
Init priority |
CONFIG_GP_ALL_DATA |
All data global pointer references |
CONFIG_GP_GLOBAL |
Global data global pointer references |
CONFIG_GP_LOCAL |
Local data global pointer references |
CONFIG_GP_NONE |
No global pointer |
CONFIG_GROVE_LCD_RGB |
Enable the Seeed Grove LCD RGB Backlight |
CONFIG_GROVE_LCD_RGB_I2C_MASTER_DEV_NAME |
I2C Master where Grove LCD is connected |
CONFIG_GROVE_LIGHT_SENSOR |
Enable the Seeed Grove Light Sensor |
CONFIG_GROVE_LIGHT_SENSOR_ADC_CHANNEL |
ADC channel used by Grove Light Sensor |
CONFIG_GROVE_LIGHT_SENSOR_ADC_DEV_NAME |
ADC where Grove Light Sensor is connected |
CONFIG_GROVE_LIGHT_SENSOR_NAME |
Driver name |
CONFIG_GROVE_TEMPERATURE_SENSOR |
Enable the Seeed Grove Temperature Sensor |
CONFIG_GROVE_TEMPERATURE_SENSOR_ADC_CHANNEL |
ADC channel used by Grove Temperature Sensor |
CONFIG_GROVE_TEMPERATURE_SENSOR_ADC_DEV_NAME |
ADC where Grove Temperature Sensor is connected |
CONFIG_GROVE_TEMPERATURE_SENSOR_NAME |
Driver name |
CONFIG_GROVE_TEMPERATURE_SENSOR_V1_0 |
v1.0 |
CONFIG_GROVE_TEMPERATURE_SENSOR_V1_X |
v1.1/v1.2 |
CONFIG_HARVARD |
Harvard Architecture |
CONFIG_HAS_ALTERA_HAL |
Altera HAL drivers support |
CONFIG_HAS_CC3220SDK |
|
CONFIG_HAS_CMSIS |
|
CONFIG_HAS_COVERAGE_SUPPORT |
|
CONFIG_HAS_CYPRESS_DRIVERS |
|
CONFIG_HAS_DIV_INSTRUCTION |
|
CONFIG_HAS_DTS |
|
CONFIG_HAS_DTS_ADC |
|
CONFIG_HAS_DTS_ENTROPY |
|
CONFIG_HAS_DTS_ETHERNET |
|
CONFIG_HAS_DTS_GPIO |
|
CONFIG_HAS_DTS_I2C |
|
CONFIG_HAS_DTS_QDEC |
|
CONFIG_HAS_DTS_SPI |
|
CONFIG_HAS_DTS_USB |
|
CONFIG_HAS_DTS_WDT |
|
CONFIG_HAS_FLASH_LOAD_OFFSET |
|
CONFIG_HAS_HW_NRF_ACL |
|
CONFIG_HAS_HW_NRF_ADC |
|
CONFIG_HAS_HW_NRF_BPROT |
|
CONFIG_HAS_HW_NRF_CC310 |
|
CONFIG_HAS_HW_NRF_CCM |
|
CONFIG_HAS_HW_NRF_CLOCK |
|
CONFIG_HAS_HW_NRF_COMP |
|
CONFIG_HAS_HW_NRF_DPPIC |
|
CONFIG_HAS_HW_NRF_ECB |
|
CONFIG_HAS_HW_NRF_EGU0 |
|
CONFIG_HAS_HW_NRF_EGU1 |
|
CONFIG_HAS_HW_NRF_EGU2 |
|
CONFIG_HAS_HW_NRF_EGU3 |
|
CONFIG_HAS_HW_NRF_EGU4 |
|
CONFIG_HAS_HW_NRF_EGU5 |
|
CONFIG_HAS_HW_NRF_GPIO0 |
|
CONFIG_HAS_HW_NRF_GPIO1 |
|
CONFIG_HAS_HW_NRF_GPIOTE |
|
CONFIG_HAS_HW_NRF_I2S |
|
CONFIG_HAS_HW_NRF_LPCOMP |
|
CONFIG_HAS_HW_NRF_MPU |
|
CONFIG_HAS_HW_NRF_MWU |
|
CONFIG_HAS_HW_NRF_NFCT |
|
CONFIG_HAS_HW_NRF_PDM |
|
CONFIG_HAS_HW_NRF_POWER |
|
CONFIG_HAS_HW_NRF_PPI |
|
CONFIG_HAS_HW_NRF_PWM0 |
|
CONFIG_HAS_HW_NRF_PWM1 |
|
CONFIG_HAS_HW_NRF_PWM2 |
|
CONFIG_HAS_HW_NRF_PWM3 |
|
CONFIG_HAS_HW_NRF_QDEC |
|
CONFIG_HAS_HW_NRF_QSPI |
|
CONFIG_HAS_HW_NRF_RNG |
|
CONFIG_HAS_HW_NRF_RTC0 |
|
CONFIG_HAS_HW_NRF_RTC1 |
|
CONFIG_HAS_HW_NRF_RTC2 |
|
CONFIG_HAS_HW_NRF_SAADC |
|
CONFIG_HAS_HW_NRF_SPI0 |
|
CONFIG_HAS_HW_NRF_SPI1 |
|
CONFIG_HAS_HW_NRF_SPI2 |
|
CONFIG_HAS_HW_NRF_SPIM0 |
|
CONFIG_HAS_HW_NRF_SPIM1 |
|
CONFIG_HAS_HW_NRF_SPIM2 |
|
CONFIG_HAS_HW_NRF_SPIM3 |
|
CONFIG_HAS_HW_NRF_SPIS0 |
|
CONFIG_HAS_HW_NRF_SPIS1 |
|
CONFIG_HAS_HW_NRF_SPIS2 |
|
CONFIG_HAS_HW_NRF_SPIS3 |
|
CONFIG_HAS_HW_NRF_SPU |
|
CONFIG_HAS_HW_NRF_SWI0 |
|
CONFIG_HAS_HW_NRF_SWI1 |
|
CONFIG_HAS_HW_NRF_SWI2 |
|
CONFIG_HAS_HW_NRF_SWI3 |
|
CONFIG_HAS_HW_NRF_SWI4 |
|
CONFIG_HAS_HW_NRF_SWI5 |
|
CONFIG_HAS_HW_NRF_TEMP |
|
CONFIG_HAS_HW_NRF_TIMER0 |
|
CONFIG_HAS_HW_NRF_TIMER1 |
|
CONFIG_HAS_HW_NRF_TIMER2 |
|
CONFIG_HAS_HW_NRF_TIMER3 |
|
CONFIG_HAS_HW_NRF_TIMER4 |
|
CONFIG_HAS_HW_NRF_TWI0 |
|
CONFIG_HAS_HW_NRF_TWI1 |
|
CONFIG_HAS_HW_NRF_TWIM0 |
|
CONFIG_HAS_HW_NRF_TWIM1 |
|
CONFIG_HAS_HW_NRF_TWIM2 |
|
CONFIG_HAS_HW_NRF_TWIM3 |
|
CONFIG_HAS_HW_NRF_TWIS0 |
|
CONFIG_HAS_HW_NRF_TWIS1 |
|
CONFIG_HAS_HW_NRF_TWIS2 |
|
CONFIG_HAS_HW_NRF_TWIS3 |
|
CONFIG_HAS_HW_NRF_UART0 |
|
CONFIG_HAS_HW_NRF_UARTE0 |
|
CONFIG_HAS_HW_NRF_UARTE1 |
|
CONFIG_HAS_HW_NRF_UARTE2 |
|
CONFIG_HAS_HW_NRF_UARTE3 |
|
CONFIG_HAS_HW_NRF_USBD |
|
CONFIG_HAS_HW_NRF_WDT |
|
CONFIG_HAS_I2C_DW |
|
CONFIG_HAS_IMX_CCM |
|
CONFIG_HAS_IMX_EPIT |
|
CONFIG_HAS_IMX_GPIO |
|
CONFIG_HAS_IMX_HAL |
|
CONFIG_HAS_IMX_I2C |
|
CONFIG_HAS_IMX_RDC |
|
CONFIG_HAS_MCG |
|
CONFIG_HAS_MCUX |
|
CONFIG_HAS_MCUX_ADC16 |
|
CONFIG_HAS_MCUX_CACHE |
|
CONFIG_HAS_MCUX_CCM |
|
CONFIG_HAS_MCUX_ELCDIF |
|
CONFIG_HAS_MCUX_ENET |
|
CONFIG_HAS_MCUX_FTFX |
|
CONFIG_HAS_MCUX_FTM |
|
CONFIG_HAS_MCUX_IGPIO |
|
CONFIG_HAS_MCUX_LPI2C |
|
CONFIG_HAS_MCUX_LPSCI |
|
CONFIG_HAS_MCUX_LPSPI |
|
CONFIG_HAS_MCUX_LPUART |
|
CONFIG_HAS_MCUX_RNGA |
|
CONFIG_HAS_MCUX_RTC |
|
CONFIG_HAS_MCUX_SIM |
|
CONFIG_HAS_MCUX_TRNG |
|
CONFIG_HAS_MEC_HAL |
Microchip MEC HAL drivers support |
CONFIG_HAS_MSP432P4XXSDK |
|
CONFIG_HAS_MULX_INSTRUCTION |
|
CONFIG_HAS_MUL_INSTRUCTION |
|
CONFIG_HAS_NORDIC_DRIVERS |
|
CONFIG_HAS_NRFX |
|
CONFIG_HAS_OSC |
|
CONFIG_HAS_QMSI |
|
CONFIG_HAS_RV32M1_LPUART |
|
CONFIG_HAS_SDL |
|
CONFIG_HAS_SEGGER_RTT |
|
CONFIG_HAS_SILABS_GECKO |
|
CONFIG_HAS_SPI_DW |
|
CONFIG_HAS_STLIB |
|
CONFIG_HAS_STM32CUBE |
|
CONFIG_HAS_SWO |
|
CONFIG_HAS_SYS_POWER_STATE_DEEP_SLEEP_1 |
|
CONFIG_HAS_SYS_POWER_STATE_DEEP_SLEEP_2 |
|
CONFIG_HAS_SYS_POWER_STATE_DEEP_SLEEP_3 |
|
CONFIG_HAS_SYS_POWER_STATE_SLEEP_1 |
|
CONFIG_HAS_SYS_POWER_STATE_SLEEP_2 |
|
CONFIG_HAS_SYS_POWER_STATE_SLEEP_3 |
|
CONFIG_HAS_WDT_MULTISTAGE |
|
CONFIG_HAVE_CUSTOM_LINKER_SCRIPT |
Custom linker scripts provided |
CONFIG_HDC1008 |
HDC1008 Temperature and Humidity Sensor |
CONFIG_HEAP_MEM_POOL_MIN_SIZE |
The smallest blocks in the heap memory pool (in bytes) |
CONFIG_HEAP_MEM_POOL_SIZE |
Heap memory pool size (in bytes) |
CONFIG_HID_INTERRUPT_EP_MPS |
USB HID Device Interrupt Endpoint size |
CONFIG_HMC5883L |
HMC5883L magnetometer |
CONFIG_HMC5883L_FS |
Full-scale range |
CONFIG_HMC5883L_GPIO_DEV_NAME |
GPIO device |
CONFIG_HMC5883L_GPIO_PIN_NUM |
Interrupt GPIO pin number |
CONFIG_HMC5883L_I2C_MASTER_DEV_NAME |
I2C master where HMC5883L is connected |
CONFIG_HMC5883L_NAME |
Driver name |
CONFIG_HMC5883L_ODR |
Output data rate |
CONFIG_HMC5883L_THREAD_PRIORITY |
Thread priority |
CONFIG_HMC5883L_THREAD_STACK_SIZE |
Thread stack size |
CONFIG_HMC5883L_TRIGGER |
|
CONFIG_HMC5883L_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_HMC5883L_TRIGGER_NONE |
No trigger |
CONFIG_HMC5883L_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_HP206C |
HopeRF HP206C precision barometer and altimeter sensor |
CONFIG_HP206C_ALT_OFFSET |
Altitude offset (in cm) |
CONFIG_HP206C_ALT_OFFSET_RUNTIME |
Altitude offset set at runtime |
CONFIG_HP206C_DRV_NAME |
Driver’s name |
CONFIG_HP206C_I2C_PORT_NAME |
I2C master controller port name |
CONFIG_HP206C_OSR |
Oversampling rate |
CONFIG_HP206C_OSR_RUNTIME |
Oversampling rate set at runtime |
CONFIG_HPET_TIMER |
HPET timer |
CONFIG_HPET_TIMER_BASE_ADDRESS |
HPET Base Address |
CONFIG_HPET_TIMER_IRQ |
HPET Timer IRQ |
CONFIG_HPET_TIMER_IRQ_PRIORITY |
HPET Timer IRQ Priority |
CONFIG_HTS221 |
HTS221 temperature and humidity sensor |
CONFIG_HTS221_ODR |
Output data rate |
CONFIG_HTS221_THREAD_PRIORITY |
Thread priority |
CONFIG_HTS221_THREAD_STACK_SIZE |
Thread stack size |
CONFIG_HTS221_TRIGGER |
|
CONFIG_HTS221_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_HTS221_TRIGGER_NONE |
No trigger |
CONFIG_HTS221_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_HTTP_PARSER |
HTTP Parser support |
CONFIG_HTTP_PARSER_STRICT |
HTTP strict parsing |
CONFIG_HTTP_PARSER_URL |
HTTP Parser for URL support |
CONFIG_HWINFO |
Hardware Information driver |
CONFIG_HWINFO_IMXRT |
NXP i.mx RT device ID |
CONFIG_HWINFO_MCUX_SIM |
NXP kinetis device ID |
CONFIG_HWINFO_NRF |
NRF device ID |
CONFIG_HWINFO_SAM |
Atmel SAM device ID |
CONFIG_HWINFO_SHELL |
Enable HWINFO Shell |
CONFIG_HWINFO_STM32 |
STM32 hwinfo |
CONFIG_HW_STACK_PROTECTION |
Hardware Stack Protection |
CONFIG_I2C |
I2C Drivers |
CONFIG_I2C_0 |
Enable I2C Port 0 |
CONFIG_I2C_0_DEFAULT_CFG |
Port 0 default configuration |
CONFIG_I2C_0_IRQ_PRI |
Port 0 interrupt priority |
CONFIG_I2C_0_NAME |
Port 0 device name |
CONFIG_I2C_0_NRF_TWI |
nRF TWI 0 |
CONFIG_I2C_0_NRF_TWIM |
nRF TWIM 0 |
CONFIG_I2C_1 |
Enable I2C Port 1 |
CONFIG_I2C_1_DEFAULT_CFG |
Port 1 default configuration |
CONFIG_I2C_1_IRQ_PRI |
Port 1 interrupt priority |
CONFIG_I2C_1_NAME |
Port 1 device name |
CONFIG_I2C_1_NRF_TWI |
nRF TWI 1 |
CONFIG_I2C_1_NRF_TWIM |
nRF TWIM 1 |
CONFIG_I2C_2 |
Enable I2C Port 2 |
CONFIG_I2C_2_DEFAULT_CFG |
Port 2 default configuration |
CONFIG_I2C_2_IRQ_PRI |
Port 2 interrupt priority |
CONFIG_I2C_2_NAME |
Port 2 device name |
CONFIG_I2C_2_NRF_TWIM |
nRF TWIM 2 |
CONFIG_I2C_3 |
Enable I2C Port 3 |
CONFIG_I2C_3_DEFAULT_CFG |
Port 3 default configuration |
CONFIG_I2C_3_IRQ_PRI |
Port 3 interrupt priority |
CONFIG_I2C_3_NAME |
Port 3 device name |
CONFIG_I2C_3_NRF_TWIM |
nRF TWIM 3 |
CONFIG_I2C_4 |
Enable I2C Port 4 |
CONFIG_I2C_4_DEFAULT_CFG |
Port 4 default configuration |
CONFIG_I2C_4_IRQ_PRI |
Port 4 interrupt priority |
CONFIG_I2C_4_NAME |
Port 4 device name |
CONFIG_I2C_5 |
Enable I2C Port 5 |
CONFIG_I2C_5_DEFAULT_CFG |
Port 5 default configuration |
CONFIG_I2C_5_IRQ_PRI |
Port 5 interrupt priority |
CONFIG_I2C_5_NAME |
Port 5 device name |
CONFIG_I2C_6 |
Enable I2C Port 6 |
CONFIG_I2C_6_DEFAULT_CFG |
Port 6 default configuration |
CONFIG_I2C_6_IRQ_PRI |
Port 6 interrupt priority |
CONFIG_I2C_6_NAME |
Port 6 device name |
CONFIG_I2C_7 |
Enable I2C Port 7 |
CONFIG_I2C_7_DEFAULT_CFG |
Port 7 default configuration |
CONFIG_I2C_7_IRQ_PRI |
Port 7 interrupt priority |
CONFIG_I2C_7_NAME |
Port 7 device name |
CONFIG_I2C_BITBANG |
|
CONFIG_I2C_CC32XX |
CC32XX I2C driver |
CONFIG_I2C_DW |
Design Ware I2C support |
CONFIG_I2C_DW_0_IRQ_DIRECT |
Direct Hardware Interrupt |
CONFIG_I2C_DW_0_IRQ_SHARED |
Shared IRQ |
CONFIG_I2C_DW_CLOCK_SPEED |
Set the clock speed for I2C |
CONFIG_I2C_DW_SHARED_IRQ |
|
CONFIG_I2C_EEPROM_SLAVE |
I2C Slave EEPROM driver |
CONFIG_I2C_EEPROM_SLAVE_0 |
Enable I2C Slave EEPROM driver instance 0 |
CONFIG_I2C_EEPROM_SLAVE_1 |
Enable I2C Slave EEPROM driver instance 1 |
CONFIG_I2C_ESP32 |
ESP32 I2C |
CONFIG_I2C_ESP32_0_IRQ |
Port 0 IRQ line |
CONFIG_I2C_ESP32_0_RX_LSB_FIRST |
Port 0 Receive LSB first |
CONFIG_I2C_ESP32_0_SCL_PIN |
Port 0 SCL pin |
CONFIG_I2C_ESP32_0_SDA_PIN |
Port 0 SDA pin |
CONFIG_I2C_ESP32_0_TX_LSB_FIRST |
Port 0 Transmit LSB first |
CONFIG_I2C_ESP32_1_IRQ |
Port 1 IRQ line |
CONFIG_I2C_ESP32_1_RX_LSB_FIRST |
Port 1 Receive LSB first |
CONFIG_I2C_ESP32_1_SCL_PIN |
Port 1 SCL pin |
CONFIG_I2C_ESP32_1_SDA_PIN |
Port 1 SDA pin |
CONFIG_I2C_ESP32_1_TX_LSB_FIRST |
Port 1 Transmit LSB first |
CONFIG_I2C_ESP32_TIMEOUT |
I2C timeout to receive a data bit in APB clock cycles |
CONFIG_I2C_GECKO |
Gecko I2C driver |
CONFIG_I2C_GPIO |
GPIO bit banging I2C support |
CONFIG_I2C_GPIO_0 |
Enable GPIO Bit Bang I2C device 0 |
CONFIG_I2C_GPIO_0_GPIO |
Bit Bang I2C device 0 GPIO name |
CONFIG_I2C_GPIO_0_NAME |
GPIO Bit Bang I2C device 0 device name |
CONFIG_I2C_GPIO_0_SCL_PIN |
Bit Bang I2C device 0 GPIO pin number for SCL |
CONFIG_I2C_GPIO_0_SDA_PIN |
Bit Bang I2C device 0 GPIO pin number for SDA |
CONFIG_I2C_GPIO_1 |
Enable GPIO Bit Bang I2C device 1 |
CONFIG_I2C_GPIO_1_GPIO |
Bit Bang I2C device 1 GPIO name |
CONFIG_I2C_GPIO_1_NAME |
Bit Bang I2C device 1 device name |
CONFIG_I2C_GPIO_1_SCL_PIN |
Bit Bang I2C device 1 GPIO pin number for SCL |
CONFIG_I2C_GPIO_1_SDA_PIN |
Bit Bang I2C device 1 GPIO pin number for SDA |
CONFIG_I2C_GPIO_2 |
Enable GPIO Bit Bang I2C device 2 |
CONFIG_I2C_GPIO_2_GPIO |
Bit Bang I2C device 2 GPIO name |
CONFIG_I2C_GPIO_2_NAME |
Bit Bang I2C device 2 device name |
CONFIG_I2C_GPIO_2_SCL_PIN |
Bit Bang I2C device 2 GPIO pin number for SCL |
CONFIG_I2C_GPIO_2_SDA_PIN |
Bit Bang I2C device 2 GPIO pin number for SDA |
CONFIG_I2C_GPIO_3 |
Enable GPIO Bit Bang I2C device 3 |
CONFIG_I2C_GPIO_3_GPIO |
Bit Bang I2C device 3 GPIO name |
CONFIG_I2C_GPIO_3_NAME |
Bit Bang I2C device 3 device name |
CONFIG_I2C_GPIO_3_SCL_PIN |
Bit Bang I2C device 3 GPIO pin number for SCL |
CONFIG_I2C_GPIO_3_SDA_PIN |
Bit Bang I2C device 3 GPIO pin number for SDA |
CONFIG_I2C_IMX |
i.MX I2C driver |
CONFIG_I2C_INIT_PRIORITY |
Init priority |
CONFIG_I2C_LOG_LEVEL |
|
CONFIG_I2C_LOG_LEVEL_DBG |
Debug |
CONFIG_I2C_LOG_LEVEL_ERR |
Error |
CONFIG_I2C_LOG_LEVEL_INF |
Info |
CONFIG_I2C_LOG_LEVEL_OFF |
Off |
CONFIG_I2C_LOG_LEVEL_WRN |
Warning |
CONFIG_I2C_MCUX |
MCUX I2C driver |
CONFIG_I2C_MCUX_LPI2C |
MCUX LPI2C driver |
CONFIG_I2C_NIOS2 |
Nios-II I2C driver |
CONFIG_I2C_NRFX |
nRF TWI nrfx drivers |
CONFIG_I2C_QMSI |
QMSI I2C driver |
CONFIG_I2C_QMSI_SS |
QMSI I2C driver for the Sensor Subsystem |
CONFIG_I2C_SAM_TWI |
Atmel SAM (TWI) I2C driver |
CONFIG_I2C_SAM_TWIHS |
Atmel SAM (TWIHS) I2C driver |
CONFIG_I2C_SBCON |
I2C driver for ARM’s SBCon two-wire serial bus interface |
CONFIG_I2C_SDA_RX_HOLD |
|
CONFIG_I2C_SDA_SETUP |
|
CONFIG_I2C_SDA_TX_HOLD |
|
CONFIG_I2C_SIFIVE |
Sifive I2C driver |
CONFIG_I2C_SLAVE |
I2C Slave Drivers |
CONFIG_I2C_SLAVE_INIT_PRIORITY |
Init priority |
CONFIG_I2C_SS_0 |
Enable I2C_SS_0 |
CONFIG_I2C_SS_1 |
Enable I2C SS Port 1 |
CONFIG_I2C_SS_SDA_HOLD |
|
CONFIG_I2C_SS_SDA_SETUP |
|
CONFIG_I2C_STM32 |
STM32 I2C driver |
CONFIG_I2C_STM32_COMBINED_INTERRUPT |
|
CONFIG_I2C_STM32_INTERRUPT |
STM32 MCU I2C Interrupt Support |
CONFIG_I2C_STM32_V1 |
STM32 V1 Driver (F1/F4X) |
CONFIG_I2C_STM32_V2 |
STM32 V2 Driver (F0/F3/F7/L0/L4X) |
CONFIG_I2S |
I2S bus drivers |
CONFIG_I2S_1 |
I2S port 1 |
CONFIG_I2S_2 |
I2S port 2 |
CONFIG_I2S_3 |
I2S port 3 |
CONFIG_I2S_4 |
I2S port 4 |
CONFIG_I2S_5 |
I2S port 5 |
CONFIG_I2S_CAVS |
Intel I2S (SSP) Bus Driver |
CONFIG_I2S_CAVS_1_DMA_RX_CHANNEL |
DMA RX channel |
CONFIG_I2S_CAVS_1_DMA_TX_CHANNEL |
DMA TX channel |
CONFIG_I2S_CAVS_1_NAME |
I2S 1 device name |
CONFIG_I2S_CAVS_2_DMA_RX_CHANNEL |
DMA RX channel |
CONFIG_I2S_CAVS_2_DMA_TX_CHANNEL |
DMA TX channel |
CONFIG_I2S_CAVS_2_NAME |
I2S 2 device name |
CONFIG_I2S_CAVS_3_DMA_RX_CHANNEL |
DMA RX channel |
CONFIG_I2S_CAVS_3_DMA_TX_CHANNEL |
DMA TX channel |
CONFIG_I2S_CAVS_3_NAME |
I2S 3 device name |
CONFIG_I2S_CAVS_DMA_NAME |
DMA device name |
CONFIG_I2S_CAVS_IRQ_PRI |
Interrupt priority |
CONFIG_I2S_INIT_PRIORITY |
Init priority |
CONFIG_I2S_LOG_LEVEL |
|
CONFIG_I2S_LOG_LEVEL_DBG |
Debug |
CONFIG_I2S_LOG_LEVEL_ERR |
Error |
CONFIG_I2S_LOG_LEVEL_INF |
Info |
CONFIG_I2S_LOG_LEVEL_OFF |
Off |
CONFIG_I2S_LOG_LEVEL_WRN |
Warning |
CONFIG_I2S_SAM_SSC |
Atmel SAM MCU family I2S (SSC) Bus Driver |
CONFIG_I2S_SAM_SSC_0_DMA_RX_CHANNEL |
DMA RX channel |
CONFIG_I2S_SAM_SSC_0_DMA_TX_CHANNEL |
DMA TX channel |
CONFIG_I2S_SAM_SSC_0_IRQ_PRI |
Interrupt priority |
CONFIG_I2S_SAM_SSC_0_NAME |
I2S 0 device name |
CONFIG_I2S_SAM_SSC_0_PIN_RF_EN |
RF pin enabled |
CONFIG_I2S_SAM_SSC_0_PIN_RK_EN |
RK pin enabled |
CONFIG_I2S_SAM_SSC_0_PIN_TD_PB5 |
PB5 |
CONFIG_I2S_SAM_SSC_0_PIN_TD_PD10 |
PD10 |
CONFIG_I2S_SAM_SSC_0_PIN_TD_PD26 |
PD26 |
CONFIG_I2S_SAM_SSC_DMA_NAME |
DMA device name |
CONFIG_I2S_SAM_SSC_RX_BLOCK_COUNT |
RX queue length |
CONFIG_I2S_SAM_SSC_TX_BLOCK_COUNT |
TX queue length |
CONFIG_I2S_STM32 |
STM32 MCU I2S controller driver |
CONFIG_I2S_STM32_PLLI2S_PLLM |
Division factor for PLLI2S VCO input clock |
CONFIG_I2S_STM32_PLLI2S_PLLN |
Multiplier factor for PLLI2S VCO output clock |
CONFIG_I2S_STM32_PLLI2S_PLLR |
Division factor for I2S clock |
CONFIG_I2S_STM32_RX_BLOCK_COUNT |
RX queue length |
CONFIG_I2S_STM32_TX_BLOCK_COUNT |
TX queue length |
CONFIG_I2S_STM32_USE_PLLI2S_ENABLE |
Enable usage of PLL |
CONFIG_IA32_LEGACY_IO_PORTS |
Support IA32 legacy IO ports |
CONFIG_IDLE_STACK_SIZE |
Size of stack for idle thread |
CONFIG_IDT_NUM_VECTORS |
Number of IDT vectors |
CONFIG_IEEE802154 |
IEEE 802.15.4 drivers options |
CONFIG_IEEE802154_CC1200 |
TI CC1200 Driver support |
CONFIG_IEEE802154_CC1200_CCA_THRESHOLD |
Value in dbm of the CCA threshold |
CONFIG_IEEE802154_CC1200_DRV_NAME |
TI CC1200 Driver’s name |
CONFIG_IEEE802154_CC1200_GPIO_SPI_CS |
Manage SPI CS through a GPIO pin |
CONFIG_IEEE802154_CC1200_INIT_PRIO |
CC1200 initialization priority |
CONFIG_IEEE802154_CC1200_MAC4 |
MAC Address Byte 4 |
CONFIG_IEEE802154_CC1200_MAC5 |
MAC Address Byte 5 |
CONFIG_IEEE802154_CC1200_MAC6 |
MAC Address Byte 6 |
CONFIG_IEEE802154_CC1200_MAC7 |
MAC Address Byte 7 |
CONFIG_IEEE802154_CC1200_PKTCFG0 |
|
CONFIG_IEEE802154_CC1200_PKTCFG1 |
|
CONFIG_IEEE802154_CC1200_PKTCFG2 |
|
CONFIG_IEEE802154_CC1200_RANDOM_MAC |
Random MAC address |
CONFIG_IEEE802154_CC1200_RFEND_CFG0 |
|
CONFIG_IEEE802154_CC1200_RFEND_CFG1 |
|
CONFIG_IEEE802154_CC1200_RF_PRESET |
Use TI CC1200 RF pre-sets |
CONFIG_IEEE802154_CC1200_RF_SET_0 |
868MHz - 50Kbps - 2-GFSK - IEEE 802.15.4g compliant - ETSI |
CONFIG_IEEE802154_CC1200_RF_SET_1 |
920MHz - 50Kbps - 2-GFSK - IEEE 802.15.4g compliant - ARIB |
CONFIG_IEEE802154_CC1200_RF_SET_2 |
434MHz - 50Kbps - 2-GFSK - IEEE 802.15.4g compliant - ETSI |
CONFIG_IEEE802154_CC1200_RSSI_OFFSET |
Value in dbm of the RSSI offset |
CONFIG_IEEE802154_CC1200_RX_STACK_SIZE |
Driver’s internal RX thread stack size |
CONFIG_IEEE802154_CC1200_SETTLING_CFG |
|
CONFIG_IEEE802154_CC1200_XOSC |
Value of the Crystal oscillator in kHz |
CONFIG_IEEE802154_CC2520 |
TI CC2520 Driver support |
CONFIG_IEEE802154_CC2520_CRYPTO |
Enable hardware crypto helper on cc2520 |
CONFIG_IEEE802154_CC2520_CRYPTO_DRV_NAME |
TI CC2520 Crypto Driver’s name |
CONFIG_IEEE802154_CC2520_CRYPTO_INIT_PRIO |
TI CC2520 crypto device initialization priority |
CONFIG_IEEE802154_CC2520_DRV_NAME |
TI CC2520 Driver’s name |
CONFIG_IEEE802154_CC2520_GPIO_SPI_CS |
Manage SPI CS through a GPIO pin |
CONFIG_IEEE802154_CC2520_INIT_PRIO |
CC2520 initialization priority |
CONFIG_IEEE802154_CC2520_MAC4 |
MAC Address Byte 4 |
CONFIG_IEEE802154_CC2520_MAC5 |
MAC Address Byte 5 |
CONFIG_IEEE802154_CC2520_MAC6 |
MAC Address Byte 6 |
CONFIG_IEEE802154_CC2520_MAC7 |
MAC Address Byte 7 |
CONFIG_IEEE802154_CC2520_RANDOM_MAC |
Random MAC address |
CONFIG_IEEE802154_CC2520_RX_STACK_SIZE |
Driver’s internal RX thread stack size |
CONFIG_IEEE802154_DRIVER_LOG_LEVEL |
|
CONFIG_IEEE802154_DRIVER_LOG_LEVEL_DBG |
Debug |
CONFIG_IEEE802154_DRIVER_LOG_LEVEL_ERR |
Error |
CONFIG_IEEE802154_DRIVER_LOG_LEVEL_INF |
Info |
CONFIG_IEEE802154_DRIVER_LOG_LEVEL_OFF |
Off |
CONFIG_IEEE802154_DRIVER_LOG_LEVEL_WRN |
Warning |
CONFIG_IEEE802154_KW41Z |
NXP KW41Z Driver support |
CONFIG_IEEE802154_KW41Z_DRV_NAME |
NXP KW41Z Driver’s name |
CONFIG_IEEE802154_KW41Z_INIT_PRIO |
KW41Z initialization priority |
CONFIG_IEEE802154_MCR20A |
NXP MCR20A Driver support |
CONFIG_IEEE802154_MCR20A_DRV_NAME |
NXP MCR20A Driver’s name |
CONFIG_IEEE802154_MCR20A_INIT_PRIO |
MCR20A initialization priority |
CONFIG_IEEE802154_MCR20A_RX_STACK_SIZE |
Driver’s internal RX thread stack size |
CONFIG_IEEE802154_NRF5 |
nRF52 series IEEE 802.15.4 Driver |
CONFIG_IEEE802154_NRF5_CCA_CORR_LIMIT |
nRF52 IEEE 802.15.4 CCA Correlator limit |
CONFIG_IEEE802154_NRF5_CCA_CORR_THRESHOLD |
nRF52 IEEE 802.15.4 CCA Correlator threshold |
CONFIG_IEEE802154_NRF5_CCA_ED_THRESHOLD |
nRF52 IEEE 802.15.4 CCA Energy Detection threshold |
CONFIG_IEEE802154_NRF5_CCA_MODE_CARRIER |
Carrier Seen |
CONFIG_IEEE802154_NRF5_CCA_MODE_CARRIER_AND_ED |
Energy Above Threshold AND Carrier Seen |
CONFIG_IEEE802154_NRF5_CCA_MODE_CARRIER_OR_ED |
Energy Above Threshold OR Carrier Seen |
CONFIG_IEEE802154_NRF5_CCA_MODE_ED |
Energy Above Threshold |
CONFIG_IEEE802154_NRF5_DRV_NAME |
nRF52 IEEE 802.15.4 Driver’s name |
CONFIG_IEEE802154_NRF5_INIT_PRIO |
nRF52 IEEE 802.15.4 initialization priority |
CONFIG_IEEE802154_NRF5_RX_STACK_SIZE |
Driver’s internal RX thread stack size |
CONFIG_IEEE802154_RAW_MODE |
Use IEEE 802.15.4 driver without the MAC stack |
CONFIG_IEEE802154_UPIPE |
UART PIPE fake radio driver support for QEMU |
CONFIG_IEEE802154_UPIPE_DRV_NAME |
UART PIPE Driver name |
CONFIG_IEEE802154_UPIPE_HW_FILTER |
Hw Filtering |
CONFIG_IEEE802154_UPIPE_MAC4 |
MAC Address Byte 4 |
CONFIG_IEEE802154_UPIPE_MAC5 |
MAC Address Byte 5 |
CONFIG_IEEE802154_UPIPE_MAC6 |
MAC Address Byte 6 |
CONFIG_IEEE802154_UPIPE_MAC7 |
MAC Address Byte 7 |
CONFIG_IEEE802154_UPIPE_RANDOM_MAC |
Random MAC address |
CONFIG_ILI9340 |
ILI9340 display driver |
CONFIG_ILI9340_LCD_ADAFRUIT_1480 |
Adafruit 2.2” TFT 1480 |
CONFIG_IMAGE_VECTOR_TABLE_OFFSET |
Image vector table offset |
CONFIG_IMG_BLOCK_BUF_SIZE |
Image writer buffer size |
CONFIG_IMG_MANAGER |
DFU image manager |
CONFIG_IMG_MANAGER_LOG_LEVEL |
|
CONFIG_IMG_MANAGER_LOG_LEVEL_DBG |
Debug |
CONFIG_IMG_MANAGER_LOG_LEVEL_ERR |
Error |
CONFIG_IMG_MANAGER_LOG_LEVEL_INF |
Info |
CONFIG_IMG_MANAGER_LOG_LEVEL_OFF |
Off |
CONFIG_IMG_MANAGER_LOG_LEVEL_WRN |
Warning |
CONFIG_IMG_MGMT_UL_CHUNK_SIZE |
Maximum chunk size for image uploads |
CONFIG_INCLUDE_RESET_VECTOR |
Include Reset vector / Include Reset vector |
CONFIG_INIT_ARM_PLL |
Initialize ARM PLL |
CONFIG_INIT_ENET_PLL |
|
CONFIG_INIT_STACKS |
Initialize stack areas |
CONFIG_INIT_SYS_PLL |
Initialize SYS PLL |
CONFIG_INIT_USB1_PLL |
Initialize USB1 PLL |
CONFIG_INIT_VIDEO_PLL |
Initialize Video PLL |
CONFIG_INTEL_GNA |
Intel GNA Inferencing Engine |
CONFIG_INTEL_GNA_INIT_PRIORITY |
Init priority |
CONFIG_INTEL_GNA_MAX_MODELS |
Max number of neural network models supported by driver |
CONFIG_INTEL_GNA_MAX_PENDING_REQUESTS |
Max number of pending inference requests |
CONFIG_INTEL_GNA_NAME |
GNA device name |
CONFIG_INTEL_GNA_POWER_MODE |
GNA operation mode |
CONFIG_INT_LATENCY_BENCHMARK |
Interrupt latency metrics [EXPERIMENTAL] |
CONFIG_IOAPIC |
IO-APIC |
CONFIG_IOAPIC_DEBUG |
IO-APIC Debugging |
CONFIG_IOAPIC_MASK_RTE |
Mask out RTE entries on boot |
CONFIG_IOAPIC_NUM_RTES |
Number of Redirection Table Entries available |
CONFIG_IPG_DIV |
IPG clock divider |
CONFIG_IPM |
IPM drivers |
CONFIG_IPM_CONSOLE_INIT_PRIORITY |
IPM console init priority |
CONFIG_IPM_CONSOLE_RECEIVER |
Inter-processor Mailbox console receiver |
CONFIG_IPM_CONSOLE_SENDER |
Inter-processor Mailbox console sender |
CONFIG_IPM_CONSOLE_STACK_SIZE |
Stack size for IPM console receiver thread |
CONFIG_IPM_IMX |
IMX IPM driver |
CONFIG_IPM_IMX_MAX_DATA_SIZE |
|
CONFIG_IPM_IMX_MAX_DATA_SIZE_16 |
16 bytes |
CONFIG_IPM_IMX_MAX_DATA_SIZE_4 |
4 bytes |
CONFIG_IPM_IMX_MAX_DATA_SIZE_8 |
8 bytes |
CONFIG_IPM_IMX_MAX_ID_VAL |
|
CONFIG_IPM_MCUX |
MCUX IPM driver |
CONFIG_IPM_QUARK_SE |
Quark SE IPM driver |
CONFIG_IPM_QUARK_SE_MASTER |
Quark SE IPM master controller |
CONFIG_IRQ_OFFLOAD |
Enable IRQ offload |
CONFIG_IRQ_OFFLOAD_INTNUM |
IRQ offload SW interrupt index |
CONFIG_IRQ_OFFLOAD_VECTOR |
IDT vector to use for IRQ offload / Interrupt vector for irq_offload |
CONFIG_ISA_IA32 |
|
CONFIG_ISA_THUMB2 |
|
CONFIG_ISL29035 |
ISL29035 light sensor |
CONFIG_ISL29035_GPIO_DEV_NAME |
GPIO device |
CONFIG_ISL29035_GPIO_PIN_NUM |
GPIO pin number |
CONFIG_ISL29035_I2C_MASTER_DEV_NAME |
I2C Master |
CONFIG_ISL29035_INTEGRATION_TIME_105K |
105 ms |
CONFIG_ISL29035_INTEGRATION_TIME_26 |
0.0256 ms |
CONFIG_ISL29035_INTEGRATION_TIME_410 |
0.41 ms |
CONFIG_ISL29035_INTEGRATION_TIME_6500 |
6.5 ms |
CONFIG_ISL29035_INT_PERSIST_1 |
1 |
CONFIG_ISL29035_INT_PERSIST_16 |
16 |
CONFIG_ISL29035_INT_PERSIST_4 |
4 |
CONFIG_ISL29035_INT_PERSIST_8 |
8 |
CONFIG_ISL29035_LUX_RANGE_16K |
16000 |
CONFIG_ISL29035_LUX_RANGE_1K |
1000 |
CONFIG_ISL29035_LUX_RANGE_4K |
4000 |
CONFIG_ISL29035_LUX_RANGE_64K |
64000 |
CONFIG_ISL29035_MODE_ALS |
ambient light |
CONFIG_ISL29035_MODE_IR |
infrared |
CONFIG_ISL29035_NAME |
Driver name |
CONFIG_ISL29035_THREAD_PRIORITY |
Thread priority / Thread priority |
CONFIG_ISL29035_THREAD_STACK_SIZE |
Thread stack size |
CONFIG_ISL29035_TRIGGER |
|
CONFIG_ISL29035_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_ISL29035_TRIGGER_NONE |
No trigger |
CONFIG_ISL29035_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_ISR_STACK_SIZE |
ISR and initialization stack size (in bytes) |
CONFIG_IS_BOOTLOADER |
Act as a bootloader |
CONFIG_IWDG_STM32 |
Independent Watchdog (IWDG) Driver for STM32 family of MCUs |
CONFIG_IWDG_STM32_START_AT_BOOT |
Start IWDG during boot |
CONFIG_IWDG_STM32_TIMEOUT |
Value for IWDG timeout in [us] |
CONFIG_JAILHOUSE |
Zephyr port to boot as a (x86) Jailhouse inmate cell payload |
CONFIG_JAILHOUSE_X2APIC |
When in Jailhouse inmate cell mode, access APIC in x2APIC mode |
CONFIG_JSON_LIBRARY |
Build JSON library |
CONFIG_JWT |
Enable JSON Web Token generation |
CONFIG_JWT_SIGN_ECDSA |
Use ECDSA signature (ES-256) |
CONFIG_JWT_SIGN_RSA |
Use RSA signature (RS-256) |
CONFIG_K64_BUS_CLOCK_DIVIDER |
Freescale K64 bus clock divider |
CONFIG_K64_CORE_CLOCK_DIVIDER |
Freescale K64 core clock divider |
CONFIG_K64_FLASH_CLOCK_DIVIDER |
Freescale K64 flash clock divider |
CONFIG_K64_FLEXBUS_CLOCK_DIVIDER |
Freescale K64 FlexBus clock divider |
CONFIG_KERNEL_BIN_NAME |
The kernel binary name |
CONFIG_KERNEL_DEBUG |
Kernel debugging |
CONFIG_KERNEL_ENTRY |
Kernel entry symbol |
CONFIG_KERNEL_INIT_PRIORITY_DEFAULT |
Default init priority |
CONFIG_KERNEL_INIT_PRIORITY_DEVICE |
Default init priority for device drivers |
CONFIG_KERNEL_INIT_PRIORITY_OBJECTS |
Kernel objects initialization priority |
CONFIG_KERNEL_LOG_LEVEL |
|
CONFIG_KERNEL_LOG_LEVEL_DBG |
Debug |
CONFIG_KERNEL_LOG_LEVEL_ERR |
Error |
CONFIG_KERNEL_LOG_LEVEL_INF |
Info |
CONFIG_KERNEL_LOG_LEVEL_OFF |
Off |
CONFIG_KERNEL_LOG_LEVEL_WRN |
Warning |
CONFIG_KERNEL_SHELL |
Enable kernel shell |
CONFIG_KOBJECT_TEXT_AREA |
Size if kobject text area |
CONFIG_KW2XD_BUS_CLOCK_DIVIDER |
KW2xD bus clock divider |
CONFIG_KW2XD_CORE_CLOCK_DIVIDER |
KW2xD core clock divider |
CONFIG_KW2XD_FLASH_CLOCK_DIVIDER |
KW2xD flash clock divider |
CONFIG_KW41_DBG_TRACE |
Enabled simplified debug tracing of events |
CONFIG_LAZY_FP_SHARING |
|
CONFIG_LDREX_STREX_AVAILABLE |
|
CONFIG_LED |
LED drivers |
CONFIG_LED_INIT_PRIORITY |
LED initialization priority |
CONFIG_LED_LOG_LEVEL |
|
CONFIG_LED_LOG_LEVEL_DBG |
Debug |
CONFIG_LED_LOG_LEVEL_ERR |
Error |
CONFIG_LED_LOG_LEVEL_INF |
Info |
CONFIG_LED_LOG_LEVEL_OFF |
Off |
CONFIG_LED_LOG_LEVEL_WRN |
Warning |
CONFIG_LED_STRIP |
LED strip drivers |
CONFIG_LED_STRIP_INIT_PRIORITY |
LED strip initialization priority |
CONFIG_LED_STRIP_LOG_LEVEL |
|
CONFIG_LED_STRIP_LOG_LEVEL_DBG |
Debug |
CONFIG_LED_STRIP_LOG_LEVEL_ERR |
Error |
CONFIG_LED_STRIP_LOG_LEVEL_INF |
Info |
CONFIG_LED_STRIP_LOG_LEVEL_OFF |
Off |
CONFIG_LED_STRIP_LOG_LEVEL_WRN |
Warning |
CONFIG_LED_STRIP_RGB_SCRATCH |
|
CONFIG_LEUART_GECKO |
Gecko leuart driver |
CONFIG_LIBMETAL |
libmetal Support |
CONFIG_LIBMETAL_SRC_PATH |
libmetal library source path |
CONFIG_LIB_CPLUSPLUS |
Link with STD C++ library |
CONFIG_LINKER_ORPHAN_SECTION_ERROR |
Error |
CONFIG_LINKER_ORPHAN_SECTION_PLACE |
Place |
CONFIG_LINKER_ORPHAN_SECTION_WARN |
Warn |
CONFIG_LINK_WHOLE_ARCHIVE |
Allow linking with –whole-archive |
CONFIG_LIS2DH |
LIS2DH Three Axis Accelerometer |
CONFIG_LIS2DH_ACCEL_RANGE_16G |
+/-16g |
CONFIG_LIS2DH_ACCEL_RANGE_2G |
+/-2g |
CONFIG_LIS2DH_ACCEL_RANGE_4G |
+/-4g |
CONFIG_LIS2DH_ACCEL_RANGE_8G |
+/-8g |
CONFIG_LIS2DH_ACCEL_RANGE_RUNTIME |
Set at runtime |
CONFIG_LIS2DH_ODR_1 |
1Hz |
CONFIG_LIS2DH_ODR_2 |
10Hz |
CONFIG_LIS2DH_ODR_3 |
25Hz |
CONFIG_LIS2DH_ODR_4 |
50Hz |
CONFIG_LIS2DH_ODR_5 |
100Hz |
CONFIG_LIS2DH_ODR_6 |
200Hz |
CONFIG_LIS2DH_ODR_7 |
400Hz |
CONFIG_LIS2DH_ODR_8 |
1.6KHz |
CONFIG_LIS2DH_ODR_9_LOW |
5KHz |
CONFIG_LIS2DH_ODR_9_NORMAL |
1.25KHz |
CONFIG_LIS2DH_ODR_RUNTIME |
Set at runtime |
CONFIG_LIS2DH_POWER_MODE_LOW |
low |
CONFIG_LIS2DH_POWER_MODE_NORMAL |
normal |
CONFIG_LIS2DH_THREAD_PRIORITY |
Thread priority |
CONFIG_LIS2DH_THREAD_STACK_SIZE |
Thread stack size |
CONFIG_LIS2DH_TRIGGER |
|
CONFIG_LIS2DH_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_LIS2DH_TRIGGER_NONE |
No trigger |
CONFIG_LIS2DH_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_LIS2DS12 |
LIS2DS12 I2C/SPI accelerometer sensor driver |
CONFIG_LIS2DS12_ENABLE_TEMP |
Enable temperature |
CONFIG_LIS2DS12_FS |
Accelerometer full-scale range |
CONFIG_LIS2DS12_ODR |
Accelerometer Output data rate frequency |
CONFIG_LIS2DS12_THREAD_PRIORITY |
Thread priority |
CONFIG_LIS2DS12_THREAD_STACK_SIZE |
Thread stack size |
CONFIG_LIS2DS12_TRIGGER |
|
CONFIG_LIS2DS12_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_LIS2DS12_TRIGGER_NONE |
No trigger |
CONFIG_LIS2DS12_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_LIS2DW12 |
LIS2DW12 I2C/SPI accelerometer sensor driver |
CONFIG_LIS2DW12_ACCEL_RANGE_16G |
16G |
CONFIG_LIS2DW12_ACCEL_RANGE_2G |
2G |
CONFIG_LIS2DW12_ACCEL_RANGE_4G |
4G |
CONFIG_LIS2DW12_ACCEL_RANGE_8G |
8G |
CONFIG_LIS2DW12_ACCEL_RANGE_RUNTIME |
Set at runtime (Default 2G) |
CONFIG_LIS2DW12_INT_PIN_1 |
int1 |
CONFIG_LIS2DW12_INT_PIN_2 |
int2 |
CONFIG_LIS2DW12_ODR_100 |
100 Hz |
CONFIG_LIS2DW12_ODR_12_5 |
12.5 Hz |
CONFIG_LIS2DW12_ODR_1600 |
1600 Hz |
CONFIG_LIS2DW12_ODR_1_6 |
1.6 Hz |
CONFIG_LIS2DW12_ODR_200 |
200 Hz |
CONFIG_LIS2DW12_ODR_25 |
25 Hz |
CONFIG_LIS2DW12_ODR_400 |
400 Hz |
CONFIG_LIS2DW12_ODR_50 |
50 Hz |
CONFIG_LIS2DW12_ODR_800 |
800 Hz |
CONFIG_LIS2DW12_ODR_RUNTIME |
Set at runtime (Default 100 Hz) |
CONFIG_LIS2DW12_POWER_MODE |
Sensor Power Modes |
CONFIG_LIS2DW12_THREAD_PRIORITY |
Thread priority |
CONFIG_LIS2DW12_THREAD_STACK_SIZE |
Thread stack size |
CONFIG_LIS2DW12_TRIGGER |
|
CONFIG_LIS2DW12_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_LIS2DW12_TRIGGER_NONE |
No trigger |
CONFIG_LIS2DW12_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_LIS2MDL |
LIS2MDL Magnetometer |
CONFIG_LIS2MDL_MAG_ODR_10 |
10 Hz |
CONFIG_LIS2MDL_MAG_ODR_100 |
100 Hz |
CONFIG_LIS2MDL_MAG_ODR_20 |
20 Hz |
CONFIG_LIS2MDL_MAG_ODR_50 |
50 Hz |
CONFIG_LIS2MDL_MAG_ODR_RUNTIME |
Set ODR at runtime (default 10 Hz) |
CONFIG_LIS2MDL_THREAD_PRIORITY |
Thread priority |
CONFIG_LIS2MDL_THREAD_STACK_SIZE |
Thread stack size |
CONFIG_LIS2MDL_TRIGGER |
|
CONFIG_LIS2MDL_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_LIS2MDL_TRIGGER_NONE |
No trigger |
CONFIG_LIS2MDL_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_LIS3MDL |
LIS3MDL magnetometer |
CONFIG_LIS3MDL_FS |
Full-scale range |
CONFIG_LIS3MDL_GPIO_DEV_NAME |
GPIO device |
CONFIG_LIS3MDL_GPIO_PIN_NUM |
Interrupt GPIO pin number |
CONFIG_LIS3MDL_ODR |
Output data rate |
CONFIG_LIS3MDL_THREAD_PRIORITY |
Thread priority |
CONFIG_LIS3MDL_THREAD_STACK_SIZE |
Thread stack size |
CONFIG_LIS3MDL_TRIGGER |
|
CONFIG_LIS3MDL_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_LIS3MDL_TRIGGER_NONE |
No trigger |
CONFIG_LIS3MDL_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_LLMNR_RESOLVER |
Enable LLMNR support |
CONFIG_LLMNR_RESOLVER_ADDITIONAL_BUF_CTR |
Additional DNS buffers |
CONFIG_LLMNR_RESPONDER |
LLMNR responder |
CONFIG_LLMNR_RESPONDER_INIT_PRIO |
Startup priority for the LLMNR responder init |
CONFIG_LLMNR_RESPONDER_LOG_LEVEL |
|
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_DBG |
Debug |
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_DEFAULT |
Default |
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_ERR |
Error |
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_INF |
Info |
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_OFF |
Off |
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_WRN |
Warning |
CONFIG_LLMNR_RESPONDER_TTL |
Time-to-Live of returned DNS name |
CONFIG_LOAPIC |
LOAPIC |
CONFIG_LOAPIC_BASE_ADDRESS |
Local APIC Base Address |
CONFIG_LOAPIC_SPURIOUS_VECTOR |
Handle LOAPIC spurious interrupts |
CONFIG_LOAPIC_SPURIOUS_VECTOR_ID |
LOAPIC spurious vector ID |
CONFIG_LOAPIC_TIMER |
LOAPIC timer |
CONFIG_LOAPIC_TIMER_IRQ |
Local APIC Timer IRQ |
CONFIG_LOAPIC_TIMER_IRQ_PRIORITY |
Local APIC Timer IRQ Priority |
CONFIG_LOG |
Logging |
CONFIG_LOG_BACKEND_FORMAT_TIMESTAMP |
Enable timestamp formatting in the backend |
CONFIG_LOG_BACKEND_NATIVE_POSIX |
Enable native backend |
CONFIG_LOG_BACKEND_NET |
Enable networking backend |
CONFIG_LOG_BACKEND_NET_MAX_BUF |
How many network buffers to allocate for sending messages |
CONFIG_LOG_BACKEND_NET_MAX_BUF_SIZE |
Max syslog message size |
CONFIG_LOG_BACKEND_NET_SERVER |
Syslog server IP address |
CONFIG_LOG_BACKEND_RTT |
Enable Segger J-Link RTT backend |
CONFIG_LOG_BACKEND_RTT_BUFFER |
Buffer number used for logger output. |
CONFIG_LOG_BACKEND_RTT_BUFFER_SIZE |
Size of reserved up-buffer for logger output. |
CONFIG_LOG_BACKEND_RTT_FORCE_PRINTK |
|
CONFIG_LOG_BACKEND_RTT_MESSAGE_SIZE |
Size of internal buffer for storing messages. |
CONFIG_LOG_BACKEND_RTT_MODE_BLOCK |
Block until message is transferred to host. |
CONFIG_LOG_BACKEND_RTT_MODE_DROP |
Drop messages that do not fit in up-buffer. |
CONFIG_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE |
Size of the output buffer |
CONFIG_LOG_BACKEND_RTT_RETRY_CNT |
Number of retries |
CONFIG_LOG_BACKEND_RTT_RETRY_DELAY_MS |
Delay between TX retries in milliseconds |
CONFIG_LOG_BACKEND_SHOW_COLOR |
Enable colors in the backend |
CONFIG_LOG_BACKEND_SWO |
Enable Serial Wire Output (SWO) backend |
CONFIG_LOG_BACKEND_SWO_FREQ_HZ |
Set SWO output frequency |
CONFIG_LOG_BACKEND_UART |
Enable UART backend |
CONFIG_LOG_BACKEND_XTENSA_OUTPUT_BUFFER_SIZE |
Size of the output buffer |
CONFIG_LOG_BACKEND_XTENSA_SIM |
Enable xtensa simulator backend |
CONFIG_LOG_BUFFER_SIZE |
Number of bytes dedicated for the logger internal buffer. |
CONFIG_LOG_CMDS |
Enable shell commands |
CONFIG_LOG_DEFAULT_LEVEL |
Default log level |
CONFIG_LOG_DOMAIN_ID |
Domain ID |
CONFIG_LOG_ENABLE_FANCY_OUTPUT_FORMATTING |
Format strings with minimal libc _prf() instead of _vprintk() |
CONFIG_LOG_FUNC_NAME_PREFIX_DBG |
Debug messages prepended |
CONFIG_LOG_FUNC_NAME_PREFIX_ERR |
Error messages prepended |
CONFIG_LOG_FUNC_NAME_PREFIX_INF |
Info messages prepended |
CONFIG_LOG_FUNC_NAME_PREFIX_WRN |
Warning messages prepended |
CONFIG_LOG_I2C_SLAVE_LEVEL |
I2C Slave log level |
CONFIG_LOG_IMMEDIATE |
Enable synchronous processing |
CONFIG_LOG_MAX_LEVEL |
Maximal log level compiled in the system |
CONFIG_LOG_MGMT_BODY_LEN |
Maximum log body length |
CONFIG_LOG_MGMT_CHUNK_SIZE |
Maximum chunk size for log downloads |
CONFIG_LOG_MGMT_NAME_LEN |
Maximum log name length |
CONFIG_LOG_MODE_NO_OVERFLOW |
New logs are dropped |
CONFIG_LOG_MODE_OVERFLOW |
Oldest logs are discarded |
CONFIG_LOG_OVERRIDE_LEVEL |
Override lowest log level |
CONFIG_LOG_PRINTK |
Enable processing of printk messages. |
CONFIG_LOG_PRINTK_MAX_STRING_LENGTH |
Maximum string length supported by LOG_PRINTK |
CONFIG_LOG_PROCESS_THREAD |
Enable internal thread for log processing |
CONFIG_LOG_PROCESS_THREAD_SLEEP_MS |
Set internal log processing thread sleep period |
CONFIG_LOG_PROCESS_THREAD_STACK_SIZE |
Stack size for the internal log processing thread |
CONFIG_LOG_PROCESS_TRIGGER_THRESHOLD |
Amount of buffered logs which triggers processing thread. |
CONFIG_LOG_RUNTIME_FILTERING |
Enable runtime reconfiguration of the logger |
CONFIG_LOG_STRDUP_BUF_COUNT |
Number of buffers in the pool used by log_strdup() |
CONFIG_LOG_STRDUP_MAX_STRING |
Longest string that can be duplicated using log_strdup() |
CONFIG_LOOPBACK_BULK_EP_MPS |
|
CONFIG_LP3943 |
LP3943 LED driver |
CONFIG_LP3943_DEV_NAME |
LP3943 device name |
CONFIG_LP3943_I2C_ADDRESS |
LP3943 I2C slave address |
CONFIG_LP3943_I2C_MASTER_DEV_NAME |
I2C master where LP3943 is connected |
CONFIG_LP5562 |
LP5562 LED driver |
CONFIG_LP5562_DEV_NAME |
LP5562 device name |
CONFIG_LP5562_I2C_ADDRESS |
LP5562 I2C slave address |
CONFIG_LP5562_I2C_MASTER_DEV_NAME |
I2C master where LP5562 is connected |
CONFIG_LPD880X_STRIP |
Enable LPD880x SPI LED strip driver |
CONFIG_LPS22HB |
LPS22HB pressure and temperature |
CONFIG_LPS22HB_SAMPLING_RATE |
Output data rate |
CONFIG_LPS25HB |
LPS25HB pressure and temperature |
CONFIG_LPS25HB_SAMPLING_RATE |
Output data rate |
CONFIG_LPUART_1 |
Enable STM32 LPUART1 Port |
CONFIG_LSM303DLHC_MAGN |
LSM303DLHC Three Axis Magnetometer |
CONFIG_LSM303DLHC_MAGN_ODR |
Data rate frequency |
CONFIG_LSM303DLHC_MAGN_RANGE |
Magnetometer measurement range |
CONFIG_LSM6DS0 |
LSM6DS0 I2C accelerometer and gyroscope Chip |
CONFIG_LSM6DS0_ACCEL_ENABLE_X_AXIS |
Enable accelerometer X axis |
CONFIG_LSM6DS0_ACCEL_ENABLE_Y_AXIS |
Enable accelerometer Y axis |
CONFIG_LSM6DS0_ACCEL_ENABLE_Z_AXIS |
Enable accelerometer Z axis |
CONFIG_LSM6DS0_ACCEL_FULLSCALE |
Accelerometer full-scale range |
CONFIG_LSM6DS0_ACCEL_SAMPLING_RATE |
Output data rate |
CONFIG_LSM6DS0_ENABLE_TEMP |
Enable temperature |
CONFIG_LSM6DS0_GYRO_ENABLE_X_AXIS |
Enable gyroscope X axis |
CONFIG_LSM6DS0_GYRO_ENABLE_Y_AXIS |
Enable gyroscope Y axis |
CONFIG_LSM6DS0_GYRO_ENABLE_Z_AXIS |
Enable gyroscope Z axis |
CONFIG_LSM6DS0_GYRO_FULLSCALE |
Gyroscope full-scale range |
CONFIG_LSM6DS0_GYRO_SAMPLING_RATE |
Output data rate |
CONFIG_LSM6DSL |
LSM6DSL I2C/SPI accelerometer and gyroscope Chip |
CONFIG_LSM6DSL_ACCEL_FS |
Accelerometer full-scale range |
CONFIG_LSM6DSL_ACCEL_ODR |
Accelerometer Output data rate frequency |
CONFIG_LSM6DSL_ENABLE_INTERNAL_PULLUP |
Enabled internals pull-up resistors |
CONFIG_LSM6DSL_ENABLE_TEMP |
Enable temperature |
CONFIG_LSM6DSL_EXT0_LIS2MDL |
LIS2MDL |
CONFIG_LSM6DSL_EXT0_LPS22HB |
LPS22HB |
CONFIG_LSM6DSL_GYRO_FS |
Gyroscope full-scale range |
CONFIG_LSM6DSL_GYRO_ODR |
Gyroscope Output data rate frequency |
CONFIG_LSM6DSL_SENSORHUB |
Enable I2C sensorhub feature |
CONFIG_LSM6DSL_THREAD_PRIORITY |
Thread priority |
CONFIG_LSM6DSL_THREAD_STACK_SIZE |
Thread stack size |
CONFIG_LSM6DSL_TRIGGER |
|
CONFIG_LSM6DSL_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_LSM6DSL_TRIGGER_NONE |
No trigger |
CONFIG_LSM6DSL_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_LSM9DS0_GYRO |
LSM9DS0 I2C gyroscope Chip |
CONFIG_LSM9DS0_GYRO_FULLSCALE_2000 |
2000 DPS |
CONFIG_LSM9DS0_GYRO_FULLSCALE_245 |
245 DPS |
CONFIG_LSM9DS0_GYRO_FULLSCALE_500 |
500 DPS |
CONFIG_LSM9DS0_GYRO_FULLSCALE_RUNTIME |
Enable dynamic full-scale |
CONFIG_LSM9DS0_GYRO_SAMPLING_RATE_190 |
190 Hz |
CONFIG_LSM9DS0_GYRO_SAMPLING_RATE_380 |
380 Hz |
CONFIG_LSM9DS0_GYRO_SAMPLING_RATE_760 |
760 Hz |
CONFIG_LSM9DS0_GYRO_SAMPLING_RATE_95 |
95 Hz |
CONFIG_LSM9DS0_GYRO_SAMPLING_RATE_RUNTIME |
Enable dynamic sampling rate |
CONFIG_LSM9DS0_GYRO_THREAD_STACK_SIZE |
Thread stack size |
CONFIG_LSM9DS0_GYRO_TRIGGERS |
Enable triggers |
CONFIG_LSM9DS0_GYRO_TRIGGER_DRDY |
Enable data ready trigger |
CONFIG_LSM9DS0_MFD |
LSM9DS0 I2C accelerometer, magnetometer and temperature sensor chip |
CONFIG_LSM9DS0_MFD_ACCEL_ENABLE |
Enable accelerometer |
CONFIG_LSM9DS0_MFD_ACCEL_ENABLE_X |
Enable accelerometer X axis |
CONFIG_LSM9DS0_MFD_ACCEL_ENABLE_Y |
Enable accelerometer Y axis |
CONFIG_LSM9DS0_MFD_ACCEL_ENABLE_Z |
Enable accelerometer Z axis |
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_16 |
16G |
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_2 |
2G |
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_4 |
4G |
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_6 |
6G |
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_8 |
8G |
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_RUNTIME |
Enable dynamic full-scale for accelerometer |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_0 |
0 Hz (power down) |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_100 |
100 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_12_5 |
12.5 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_1600 |
1600 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_200 |
200 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_25 |
25 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_3_125 |
3.125 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_400 |
400 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_50 |
50 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_6_25 |
6.25 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_800 |
800 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_RUNTIME |
Enable dynamic sampling rate for accelerometer |
CONFIG_LSM9DS0_MFD_MAGN_ENABLE |
Enable magnetometer |
CONFIG_LSM9DS0_MFD_MAGN_FULL_SCALE_12 |
12 Gauss |
CONFIG_LSM9DS0_MFD_MAGN_FULL_SCALE_2 |
2 Gauss |
CONFIG_LSM9DS0_MFD_MAGN_FULL_SCALE_4 |
4 Gauss |
CONFIG_LSM9DS0_MFD_MAGN_FULL_SCALE_8 |
8 Gauss |
CONFIG_LSM9DS0_MFD_MAGN_FULL_SCALE_RUNTIME |
Enable dynamic full-scale for magnetometer |
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_100 |
100 Hz |
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_12_5 |
12.5 Hz |
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_25 |
25 Hz |
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_3_125 |
3.125 Hz |
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_50 |
50 Hz |
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_6_25 |
6.25 Hz |
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_RUNTIME |
Enable dynamic sampling rate for magnetometer |
CONFIG_LSM9DS0_MFD_TEMP_ENABLE |
Enable temperature sensor |
CONFIG_LVGL |
LittlevGL Support |
CONFIG_LVGL_ANIMATION |
Enable animations |
CONFIG_LVGL_ANTIALIAS |
Enable anti-aliasing |
CONFIG_LVGL_BITS_PER_PIXEL |
Bits per pixel |
CONFIG_LVGL_BUILD_IN_FONTS |
Enable build-in fonts |
CONFIG_LVGL_BUILD_IN_FONT_10 |
Enable build-in 10px fonts |
CONFIG_LVGL_BUILD_IN_FONT_10_ASCII_BPP |
ASCII character set BPP |
CONFIG_LVGL_BUILD_IN_FONT_10_CYRILLIC_BPP |
Cyrillic character set BPP |
CONFIG_LVGL_BUILD_IN_FONT_10_LATIN_SUP_BPP |
Latin supplement character set BPP |
CONFIG_LVGL_BUILD_IN_FONT_10_SYMBOL_BPP |
Symbol character set BPP |
CONFIG_LVGL_BUILD_IN_FONT_20 |
Enable build-in 20px fonts |
CONFIG_LVGL_BUILD_IN_FONT_20_ASCII_BPP |
ASCII character set BPP |
CONFIG_LVGL_BUILD_IN_FONT_20_CYRILLIC_BPP |
Cyrillic character set BPP |
CONFIG_LVGL_BUILD_IN_FONT_20_LATIN_SUP_BPP |
Latin supplement character set BPP |
CONFIG_LVGL_BUILD_IN_FONT_20_SYMBOL_BPP |
Symbol character set BPP |
CONFIG_LVGL_BUILD_IN_FONT_30 |
Enable build-in 30px fonts |
CONFIG_LVGL_BUILD_IN_FONT_30_ASCII_BPP |
ASCII character set BPP |
CONFIG_LVGL_BUILD_IN_FONT_30_CYRILLIC_BPP |
Cyrillic character set BPP |
CONFIG_LVGL_BUILD_IN_FONT_30_LATIN_SUP_BPP |
Latin supplement character set BPP |
CONFIG_LVGL_BUILD_IN_FONT_30_SYMBOL_BPP |
Symbol character set BPP |
CONFIG_LVGL_BUILD_IN_FONT_40 |
Enable build-in 40px fonts |
CONFIG_LVGL_BUILD_IN_FONT_40_ASCII_BPP |
ASCII character set BPP |
CONFIG_LVGL_BUILD_IN_FONT_40_CYRILLIC_BPP |
Cyrillic character set BPP |
CONFIG_LVGL_BUILD_IN_FONT_40_LATIN_SUP_BPP |
Latin supplement character set BPP |
CONFIG_LVGL_BUILD_IN_FONT_40_SYMBOL_BPP |
Symbol character set BPP |
CONFIG_LVGL_BUILD_IN_FONT_MONOSPACE |
Enable build-in monospace font |
CONFIG_LVGL_CHROMA_KEY_BLUE |
Blue |
CONFIG_LVGL_CHROMA_KEY_CUSTOM |
Custom |
CONFIG_LVGL_CHROMA_KEY_GREEN |
Green |
CONFIG_LVGL_CHROMA_KEY_RED |
Red |
CONFIG_LVGL_COLOR_16_SWAP |
RGB565 byte swap |
CONFIG_LVGL_COLOR_DEPTH_1 |
1-bit |
CONFIG_LVGL_COLOR_DEPTH_16 |
16-bit |
CONFIG_LVGL_COLOR_DEPTH_32 |
32-bit |
CONFIG_LVGL_COLOR_DEPTH_8 |
8-bit |
CONFIG_LVGL_COLOR_SCREEN_TRANSP |
Transparency support |
CONFIG_LVGL_COMPILER_NON_CONST_INIT_SUPPORTED |
Enable non constant init |
CONFIG_LVGL_CUSTOM_CHROMA_KEY_BLUE |
Chroma Key Blue |
CONFIG_LVGL_CUSTOM_CHROMA_KEY_GREEN |
Chroma Key Green |
CONFIG_LVGL_CUSTOM_CHROMA_KEY_RED |
Chroma Key Red |
CONFIG_LVGL_DEFAULT_FONT_BUILD_IN_10_ASCII |
Build-in ASCII font 10 |
CONFIG_LVGL_DEFAULT_FONT_BUILD_IN_20_ASCII |
Build-in ASCII font 20 |
CONFIG_LVGL_DEFAULT_FONT_BUILD_IN_30_ASCII |
Build-in ASCII font 30 |
CONFIG_LVGL_DEFAULT_FONT_BUILD_IN_40_ASCII |
Build-in ASCII font 40 |
CONFIG_LVGL_DEFAULT_FONT_BUILD_IN_MONOSPACE |
Build-in monospace font |
CONFIG_LVGL_DEFAULT_FONT_CUSTOM |
Custom font |
CONFIG_LVGL_DIRECT_DRAW |
Enable direct draw |
CONFIG_LVGL_DISPLAY_DEV_NAME |
Display device name |
CONFIG_LVGL_DOUBLE_VDB |
Use 2 Virtual Display Buffers |
CONFIG_LVGL_DPI |
DPI |
CONFIG_LVGL_FILESYSTEM |
Enable file system |
CONFIG_LVGL_GPU |
Enable GPU support |
CONFIG_LVGL_GROUP |
Enable group support |
CONFIG_LVGL_HOR_RES |
Horizontal Screen Resolution |
CONFIG_LVGL_IMG_CF_ALPHA |
Enable alpha indexed image support |
CONFIG_LVGL_IMG_CF_INDEXED |
Enable indexed image support |
CONFIG_LVGL_INPUT_DRAG_THRESHOLD |
Drag Threshold |
CONFIG_LVGL_INPUT_DRAG_THROW_SLOW_DOWN |
Drag throw slow-down |
CONFIG_LVGL_INPUT_LONG_PRESS_TIME |
Long press time |
CONFIG_LVGL_INPUT_LONG_RESS_REPEAT_TIME |
Long press repeat time |
CONFIG_LVGL_INPUT_MARK_PRESSED_POINTS |
Mark pressed points |
CONFIG_LVGL_INPUT_REFRESH_PERIOD |
Input device refresh period |
CONFIG_LVGL_LOG_LEVEL |
|
CONFIG_LVGL_LOG_LEVEL_DBG |
Debug |
CONFIG_LVGL_LOG_LEVEL_ERR |
Error |
CONFIG_LVGL_LOG_LEVEL_INF |
Info |
CONFIG_LVGL_LOG_LEVEL_OFF |
Off |
CONFIG_LVGL_LOG_LEVEL_WRN |
Warning |
CONFIG_LVGL_MEM_POOL_HEAP_KERNEL |
Kernel Heap |
CONFIG_LVGL_MEM_POOL_HEAP_LIB_C |
C library Heap |
CONFIG_LVGL_MEM_POOL_KERNEL |
Kernel space lvgl pool |
CONFIG_LVGL_MEM_POOL_MAX_SIZE |
Maximum memory pool block size |
CONFIG_LVGL_MEM_POOL_MIN_SIZE |
Minimum memory pool block size |
CONFIG_LVGL_MEM_POOL_NUMBER_BLOCKS |
Number of max size blocks in memory pool |
CONFIG_LVGL_MEM_POOL_USER |
User space lvgl pool |
CONFIG_LVGL_MULTI_LANGUAGE |
Multi language support |
CONFIG_LVGL_NBR_OF_LANGUAGES |
Number of languages |
CONFIG_LVGL_OBJ_ARC |
Arc Object |
CONFIG_LVGL_OBJ_BAR |
Bar object |
CONFIG_LVGL_OBJ_BUTTON |
Button object |
CONFIG_LVGL_OBJ_BUTTON_INK_EFFECT |
Enable ink effect |
CONFIG_LVGL_OBJ_BUTTON_MATRIX |
Button Matrix object |
CONFIG_LVGL_OBJ_CALENDAR |
Calendar object |
CONFIG_LVGL_OBJ_CANVAS |
Canvas object |
CONFIG_LVGL_OBJ_CHART |
Chart object |
CONFIG_LVGL_OBJ_CHECK_BOX |
Check box object |
CONFIG_LVGL_OBJ_CONTAINER |
Container Object |
CONFIG_LVGL_OBJ_DROP_DOWN_LIST |
Drop Down List object |
CONFIG_LVGL_OBJ_DROP_DOWN_LIST_ANIM_TIME |
Drop Down list animation time |
CONFIG_LVGL_OBJ_GAUGE |
Gauge object |
CONFIG_LVGL_OBJ_IMAGE |
Image Object |
CONFIG_LVGL_OBJ_IMG_BUTTON |
Image Button |
CONFIG_LVGL_OBJ_IMG_BUTTON_TILED |
Image button tile support |
CONFIG_LVGL_OBJ_KEYBOARD |
Keyboard object |
CONFIG_LVGL_OBJ_LABEL |
Label Object |
CONFIG_LVGL_OBJ_LABEL_SCROLL_SPEED |
Label scroll speed |
CONFIG_LVGL_OBJ_LED |
LED object |
CONFIG_LVGL_OBJ_LINE |
Line Object |
CONFIG_LVGL_OBJ_LINE_METER |
Line meter object |
CONFIG_LVGL_OBJ_LIST |
List object |
CONFIG_LVGL_OBJ_LIST_FOCUS_TIME |
List focus time |
CONFIG_LVGL_OBJ_MSG_BOX |
Message box object |
CONFIG_LVGL_OBJ_PAGE |
Page object |
CONFIG_LVGL_OBJ_PRELOAD |
Pre-load object |
CONFIG_LVGL_OBJ_PRELOAD_DEF_ANIMATION_FILL |
Fill |
CONFIG_LVGL_OBJ_PRELOAD_DEF_ANIMATION_SPIN_ARC |
Spinning Arc |
CONFIG_LVGL_OBJ_PRELOAD_DEF_ARC_LENGTH |
Default arc length |
CONFIG_LVGL_OBJ_PRELOAD_DEF_SPIN_TIME |
Default spin time |
CONFIG_LVGL_OBJ_REALIGN |
Object realign support |
CONFIG_LVGL_OBJ_ROLLER |
Roller object |
CONFIG_LVGL_OBJ_ROLLER_ANIM_TIME |
Roller animation time |
CONFIG_LVGL_OBJ_SLIDER |
Slider object |
CONFIG_LVGL_OBJ_SPINBOX |
Spinbox object |
CONFIG_LVGL_OBJ_SWITCH |
Switch object |
CONFIG_LVGL_OBJ_TABLE |
Table object |
CONFIG_LVGL_OBJ_TABLE_COLUMN_MAX |
Maximum number of table columns |
CONFIG_LVGL_OBJ_TAB_VIEW |
Tab view object |
CONFIG_LVGL_OBJ_TAB_VIEW_ANIMATION_TIME |
Tab view animation time |
CONFIG_LVGL_OBJ_TEXT_AREA |
Text area object |
CONFIG_LVGL_OBJ_TEXT_AREA_CURSOR_BLINK_TIME |
Cursor Blink Time |
CONFIG_LVGL_OBJ_TEXT_AREA_PWD_SHOW_TIME |
Label scroll speed |
CONFIG_LVGL_OBJ_TILE_VIEW |
Tile view object |
CONFIG_LVGL_OBJ_TILE_VIEW_ANIMATION_TIME |
Tile view animation time |
CONFIG_LVGL_OBJ_WINDOW |
Window object |
CONFIG_LVGL_SCREEN_REFRESH_PERIOD |
Screen refresh period |
CONFIG_LVGL_SHADOW |
Enable shadows |
CONFIG_LVGL_TEXT_BREAK_CHARACTERS |
Text break characters |
CONFIG_LVGL_TEXT_BREAK_LONG_WORD_POST_MIN_LEN |
Minimum long word length after text break |
CONFIG_LVGL_TEXT_BREAK_LONG_WORD_PRE_MIN_LEN |
Minimum long word length before text break |
CONFIG_LVGL_TEXT_BREAK_LONG_WORD_SIZE |
Long word size for text break |
CONFIG_LVGL_THEMES |
Enable build-in themes |
CONFIG_LVGL_THEME_ALIEN |
Enable alien theme support |
CONFIG_LVGL_THEME_DEFAULT |
Enable default theme support |
CONFIG_LVGL_THEME_LIVE_UPDATE |
Enable runtime theme switching |
CONFIG_LVGL_THEME_MATERIAL |
Enable material theme support |
CONFIG_LVGL_THEME_MONO |
Enable mono theme support |
CONFIG_LVGL_THEME_NEMO |
Enable nemo theme support |
CONFIG_LVGL_THEME_NIGHT |
Enable night theme support |
CONFIG_LVGL_THEME_ZEN |
Enable zen theme support |
CONFIG_LVGL_TRUE_DOUBLE_BUFFERED |
True double buffered |
CONFIG_LVGL_UTF_8 |
Enable UTF-8 support |
CONFIG_LVGL_VDB_SIZE |
Virtual Display Buffer Size |
CONFIG_LVGL_VDB_STATIC |
Statically allocate virtual display buffer |
CONFIG_LVGL_VER_RES |
Vertical Screen Resolution |
CONFIG_LVGL_VLA_SUPPORT |
Enable variable length array support |
CONFIG_LWM2M |
OMA LWM2M protocol stack |
CONFIG_LWM2M_COAP_BLOCK_SIZE |
LWM2M CoAP block-wise transfer size |
CONFIG_LWM2M_DEVICE_ERROR_CODE_MAX |
Maximum # of device obj error codes to store |
CONFIG_LWM2M_DEVICE_PWRSRC_MAX |
Maximum # of device power source records |
CONFIG_LWM2M_DTLS_SUPPORT |
Enable DTLS support in the LwM2M client |
CONFIG_LWM2M_ENGINE_DEFAULT_LIFETIME |
LWM2M engine default server connection lifetime |
CONFIG_LWM2M_ENGINE_MAX_MESSAGES |
LWM2M engine max. message object |
CONFIG_LWM2M_ENGINE_MAX_OBSERVER |
Maximum # of observable LWM2M resources |
CONFIG_LWM2M_ENGINE_MAX_PENDING |
LWM2M engine max. pending objects |
CONFIG_LWM2M_ENGINE_MAX_REPLIES |
LWM2M engine max. reply objects |
CONFIG_LWM2M_ENGINE_MESSAGE_HEADER_SIZE |
Room for CoAP header data |
CONFIG_LWM2M_ENGINE_STACK_SIZE |
LWM2M engine stack size |
CONFIG_LWM2M_FIRMWARE_UPDATE_OBJ_SUPPORT |
Firmware Update object support |
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_COAP_PROXY_ADDR |
CoAP proxy network address |
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_COAP_PROXY_SUPPORT |
Firmware Update object pull via CoAP-CoAP/HTTP proxy support |
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_LOCAL_PORT |
LWM2M client firmware pull local port |
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_SUPPORT |
Firmware Update object pull support |
CONFIG_LWM2M_IPSO_LIGHT_CONTROL |
IPSO Light Control Support |
CONFIG_LWM2M_IPSO_LIGHT_CONTROL_INSTANCE_COUNT |
Maximum # of IPSO Light Control object instances |
CONFIG_LWM2M_IPSO_SUPPORT |
IPSO Alliance Smart Object Support |
CONFIG_LWM2M_IPSO_TEMP_SENSOR |
IPSO Temperature Sensor Support |
CONFIG_LWM2M_IPSO_TEMP_SENSOR_INSTANCE_COUNT |
Maximum # of IPSO Temperature Sensor object instances |
CONFIG_LWM2M_IPSO_TIMER |
IPSO Light Control Support |
CONFIG_LWM2M_IPSO_TIMER_INSTANCE_COUNT |
Maximum # of IPSO Timer object instances |
CONFIG_LWM2M_LOCAL_PORT |
LWM2M client port |
CONFIG_LWM2M_LOG_LEVEL |
|
CONFIG_LWM2M_LOG_LEVEL_DBG |
Debug |
CONFIG_LWM2M_LOG_LEVEL_DEFAULT |
Default |
CONFIG_LWM2M_LOG_LEVEL_ERR |
Error |
CONFIG_LWM2M_LOG_LEVEL_INF |
Info |
CONFIG_LWM2M_LOG_LEVEL_OFF |
Off |
CONFIG_LWM2M_LOG_LEVEL_WRN |
Warning |
CONFIG_LWM2M_NUM_ATTR |
Maximum # of LWM2M attributes |
CONFIG_LWM2M_NUM_BLOCK1_CONTEXT |
Maximum # of LWM2M block1 contexts |
CONFIG_LWM2M_PEER_PORT |
LWM2M server port |
CONFIG_LWM2M_RD_CLIENT_SUPPORT |
support for LWM2M client bootstrap/registration state machine |
CONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP |
Enable bootstrap support |
CONFIG_LWM2M_RW_JSON_SUPPORT |
support for JSON writer |
CONFIG_LWM2M_SECURITY_INSTANCE_COUNT |
Maximum # of LWM2M Security object instances |
CONFIG_LWM2M_SECURITY_KEY_SIZE |
Buffer size of the security key resources |
CONFIG_LWM2M_SERVER_INSTANCE_COUNT |
Maximum # of LWM2M Server object instances |
CONFIG_MAIN_STACK_SIZE |
Size of stack for initialization and main thread |
CONFIG_MAIN_THREAD_PRIORITY |
Priority of initialization/main thread |
CONFIG_MASS_STORAGE_BULK_EP_MPS |
|
CONFIG_MASS_STORAGE_DISK_NAME |
Mass storage disk or drive name |
CONFIG_MAX30101 |
MAX30101 Pulse Oximeter and Heart Rate Sensor |
CONFIG_MAX30101_ADC_RGE |
ADC range control |
CONFIG_MAX30101_FIFO_A_FULL |
FIFO almost full value |
CONFIG_MAX30101_FIFO_ROLLOVER_EN |
FIFO rolls on full |
CONFIG_MAX30101_HEART_RATE_MODE |
Heart rate mode |
CONFIG_MAX30101_LED1_PA |
LED1 (red) pulse amplitude |
CONFIG_MAX30101_LED2_PA |
LED2 (IR) pulse amplitude |
CONFIG_MAX30101_LED3_PA |
LED2 (green) pulse amplitude |
CONFIG_MAX30101_MULTI_LED_MODE |
Multi-LED mode |
CONFIG_MAX30101_SLOT1 |
Slot 1 |
CONFIG_MAX30101_SLOT2 |
Slot 2 |
CONFIG_MAX30101_SLOT3 |
Slot 3 |
CONFIG_MAX30101_SLOT4 |
Slot 4 |
CONFIG_MAX30101_SMP_AVE |
Sample averaging |
CONFIG_MAX30101_SPO2_MODE |
SpO2 mode |
CONFIG_MAX30101_SR |
ADC sample rate control |
CONFIG_MAX44009 |
MAX44009 Light Sensor |
CONFIG_MAX44009_DRV_NAME |
Driver name |
CONFIG_MAX44009_I2C_ADDR |
MAX44009 I2C address |
CONFIG_MAX44009_I2C_DEV_NAME |
I2C master where MAX44009 is connected |
CONFIG_MAX_DOMAIN_PARTITIONS |
Maximum number of partitions per memory domain |
CONFIG_MAX_IRQ_LINES |
Number of IRQ lines |
CONFIG_MAX_IRQ_PER_AGGREGATOR |
Max IRQs per interrupt aggregator |
CONFIG_MAX_PTHREAD_COUNT |
Maximum pthread count in POSIX application |
CONFIG_MAX_THREAD_BYTES |
Bytes to use when tracking object thread permissions |
CONFIG_MAX_TIMER_COUNT |
Maximum timer count in POSIX application |
CONFIG_MBEDTLS |
mbedTLS Support |
CONFIG_MBEDTLS_AES_ROM_TABLES |
Use precomputed AES tables stored in ROM. |
CONFIG_MBEDTLS_BUILTIN |
Enable mbedTLS integrated sources |
CONFIG_MBEDTLS_CFG_FILE |
mbed TLS configuration file |
CONFIG_MBEDTLS_CHACHAPOLY_AEAD_ENABLED |
Enable the ChaCha20-Poly1305 AEAD algorithm |
CONFIG_MBEDTLS_CIPHER_AES_ENABLED |
Enable the AES block cipher |
CONFIG_MBEDTLS_CIPHER_ALL_ENABLED |
Enable all available ciphers |
CONFIG_MBEDTLS_CIPHER_ARC4_ENABLED |
Enable the ARC4 stream cipher |
CONFIG_MBEDTLS_CIPHER_BLOWFISH_ENABLED |
Enable the Blowfish block cipher |
CONFIG_MBEDTLS_CIPHER_CAMELLIA_ENABLED |
Enable the Camellia block cipher |
CONFIG_MBEDTLS_CIPHER_CBC_ENABLED |
Enable Cipher Block Chaining mode (CBC) for symmetric ciphers |
CONFIG_MBEDTLS_CIPHER_CCM_ENABLED |
Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher |
CONFIG_MBEDTLS_CIPHER_CHACHA20_ENABLED |
Enable the ChaCha20 stream cipher |
CONFIG_MBEDTLS_CIPHER_DES_ENABLED |
Enable the DES block cipher |
CONFIG_MBEDTLS_CIPHER_MODE_GCM_ENABLED |
Enable the Galois/Counter Mode (GCM) for AES |
CONFIG_MBEDTLS_CIPHER_MODE_XTS_ENABLED |
Enable Xor-encrypt-xor with ciphertext stealing mode (XTS) for AES |
CONFIG_MBEDTLS_CTR_DRBG_ENABLED |
Enable the CTR_DRBG AES-256-based random generator |
CONFIG_MBEDTLS_DEBUG |
mbed TLS debug activation |
CONFIG_MBEDTLS_DEBUG_LEVEL |
mbed TLS default debug level |
CONFIG_MBEDTLS_DTLS |
Enable support for DTLS |
CONFIG_MBEDTLS_ECP_ALL_ENABLED |
Enable all available elliptic curves |
CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED |
Enable BP256R1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED |
Enable BP384R1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED |
Enable BP512R1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED |
Enable CURVE25519 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_CURVE448_ENABLED |
Enable CURVE448 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED |
Enable SECP192K1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED |
Enable SECP192R1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED |
Enable SECP224K1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED |
Enable SECP224R1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED |
Enable SECP256K1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED |
Enable SECP256R1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED |
Enable SECP384R1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED |
Enable SECP521R1 elliptic curve |
CONFIG_MBEDTLS_ECP_NIST_OPTIM |
Enable NSIT curves optimization |
CONFIG_MBEDTLS_ENABLE_HEAP |
Enable global heap for mbed TLS |
CONFIG_MBEDTLS_GENPRIME_ENABLED |
Enable the prime-number generation code. |
CONFIG_MBEDTLS_HAVE_ASM |
Enable use of assembly code |
CONFIG_MBEDTLS_HEAP_SIZE |
Heap size for mbed TLS |
CONFIG_MBEDTLS_HMAC_DRBG_ENABLED |
Enable the HMAC_DRBG random generator |
CONFIG_MBEDTLS_INSTALL_PATH |
mbedTLS install path |
CONFIG_MBEDTLS_KEY_EXCHANGE_ALL_ENABLED |
Enable all available ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED |
Enable the DHE-PSK based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED |
Enable the DHE-RSA based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED |
Enable the ECDHE-ECDSA based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED |
Enable the ECDHE-PSK based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED |
Enable the ECDHE-RSA based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED |
Enable the ECDH-ECDSA based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED |
Enable the ECDH-RSA based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED |
Enable the ECJPAKE based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_PSK_ENABLED |
Enable the PSK based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA_ENABLED |
Enable the RSA-only based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED |
Enable the RSA-PSK based ciphersuite modes |
CONFIG_MBEDTLS_LIBRARY |
Enable mbedTLS external library |
CONFIG_MBEDTLS_MAC_ALL_ENABLED |
Enable all available MAC methods |
CONFIG_MBEDTLS_MAC_MD4_ENABLED |
Enable the MD4 hash algorithm |
CONFIG_MBEDTLS_MAC_MD5_ENABLED |
Enable the MD5 hash algorithm |
CONFIG_MBEDTLS_MAC_POLY1305_ENABLED |
Enable the Poly1305 MAC algorithm |
CONFIG_MBEDTLS_MAC_SHA1_ENABLED |
Enable the SHA1 hash algorithm |
CONFIG_MBEDTLS_MAC_SHA256_ENABLED |
Enable the SHA-224 and SHA-256 hash algorithms |
CONFIG_MBEDTLS_MAC_SHA512_ENABLED |
Enable the SHA-384 and SHA-512 hash algorithms |
CONFIG_MBEDTLS_PEM_CERTIFICATE_FORMAT |
Enable support for PEM certificate format |
CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN |
Max payload size for TLS protocol message |
CONFIG_MBEDTLS_TEST |
Compile internal self test functions |
CONFIG_MBEDTLS_TLS_VERSION_1_0 |
Enable support for TLS 1.0 |
CONFIG_MBEDTLS_TLS_VERSION_1_1 |
Enable support for TLS 1.1 (DTLS 1.0) |
CONFIG_MBEDTLS_TLS_VERSION_1_2 |
Enable support for TLS 1.2 (DTLS 1.2) |
CONFIG_MBEDTLS_USER_CONFIG_ENABLE |
Enable user mbedTLS config file |
CONFIG_MBEDTLS_USER_CONFIG_FILE |
User configuration file for mbedTLS |
CONFIG_MCG_FCRDIV |
Fast internal reference clock divider |
CONFIG_MCG_FRDIV |
FLL external reference divider |
CONFIG_MCG_PRDIV0 |
PLL external reference divider |
CONFIG_MCG_VDIV0 |
VCO 0 divider |
CONFIG_MCP9808 |
MCP9808 temperature sensor |
CONFIG_MCP9808_DEV_NAME |
MCP9808 device name |
CONFIG_MCP9808_GPIO_CONTROLLER |
GPIO controller for MCP9808 interrupt |
CONFIG_MCP9808_GPIO_PIN |
GPIO pin for MCP9808 interrupt |
CONFIG_MCP9808_I2C_ADDR |
MCP9808 I2C slave address |
CONFIG_MCP9808_I2C_DEV_NAME |
I2C master where MCP9808 is connected |
CONFIG_MCP9808_THREAD_PRIORITY |
MCP9808 thread priority |
CONFIG_MCP9808_THREAD_STACK_SIZE |
Sensor delayed work thread stack size |
CONFIG_MCP9808_TRIGGER |
|
CONFIG_MCP9808_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_MCP9808_TRIGGER_NONE |
No trigger |
CONFIG_MCP9808_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_MCR20A_CLK_OUT_16MHZ |
16 MHz |
CONFIG_MCR20A_CLK_OUT_1MHZ |
1 MHz |
CONFIG_MCR20A_CLK_OUT_250KHZ |
250 kHz |
CONFIG_MCR20A_CLK_OUT_32768HZ |
32768 Hz |
CONFIG_MCR20A_CLK_OUT_32MHZ |
32 MHz |
CONFIG_MCR20A_CLK_OUT_4MHZ |
4 MHz |
CONFIG_MCR20A_CLK_OUT_62500HZ |
62500 Hz |
CONFIG_MCR20A_CLK_OUT_8MHZ |
8 MHz |
CONFIG_MCR20A_CLK_OUT_DISABLED |
Disabled |
CONFIG_MCR20A_IS_PART_OF_KW2XD_SIP |
MCR20A device is part of KW2xD SiP |
CONFIG_MCUBOOT_IMG_MANAGER |
Image manager for mcuboot |
CONFIG_MCUMGR |
mcumgr Support |
CONFIG_MCUMGR_BUF_COUNT |
Number of mcumgr buffers |
CONFIG_MCUMGR_BUF_SIZE |
Size of each mcumgr buffer |
CONFIG_MCUMGR_BUF_USER_DATA_SIZE |
Size of mcumgr buffer user data |
CONFIG_MCUMGR_CMD_FS_MGMT |
Enable mcumgr handlers for file management |
CONFIG_MCUMGR_CMD_IMG_MGMT |
Enable mcumgr handlers for image management |
CONFIG_MCUMGR_CMD_LOG_MGMT |
Enable mcumgr handlers for log management |
CONFIG_MCUMGR_CMD_OS_MGMT |
Enable mcumgr handlers for OS management |
CONFIG_MCUMGR_CMD_STAT_MGMT |
Enable mcumgr handlers for statistics management |
CONFIG_MCUMGR_SMP_BT |
Bluetooth mcumgr SMP transport |
CONFIG_MCUMGR_SMP_SHELL |
Shell mcumgr SMP transport |
CONFIG_MCUMGR_SMP_SHELL_MTU |
Shell SMP MTU |
CONFIG_MCUMGR_SMP_UART |
UART mcumgr SMP transport |
CONFIG_MCUMGR_SMP_UART_MTU |
UART SMP MTU |
CONFIG_MCUX_ELCDIF_PANEL_RK043FN02H |
Rocktech rk043fn02h-ct |
CONFIG_MCUX_ELCDIF_POOL_BLOCK_ALIGN |
Alignment of memory pool blocks |
CONFIG_MCUX_ELCDIF_POOL_BLOCK_MAX |
Maximum memory pool block size |
CONFIG_MCUX_ELCDIF_POOL_BLOCK_MIN |
Minimum memory pool block size |
CONFIG_MCUX_ELCDIF_POOL_BLOCK_NUM |
Number of memory pool blocks |
CONFIG_MDNS_RESOLVER |
Enable mDNS support |
CONFIG_MDNS_RESOLVER_ADDITIONAL_BUF_CTR |
Additional DNS buffers |
CONFIG_MDNS_RESPONDER |
mDNS responder |
CONFIG_MDNS_RESPONDER_INIT_PRIO |
Startup priority for the mDNS responder init |
CONFIG_MDNS_RESPONDER_LOG_LEVEL |
|
CONFIG_MDNS_RESPONDER_LOG_LEVEL_DBG |
Debug |
CONFIG_MDNS_RESPONDER_LOG_LEVEL_DEFAULT |
Default |
CONFIG_MDNS_RESPONDER_LOG_LEVEL_ERR |
Error |
CONFIG_MDNS_RESPONDER_LOG_LEVEL_INF |
Info |
CONFIG_MDNS_RESPONDER_LOG_LEVEL_OFF |
Off |
CONFIG_MDNS_RESPONDER_LOG_LEVEL_WRN |
Warning |
CONFIG_MDNS_RESPONDER_TTL |
Time-to-Live of returned DNS name |
CONFIG_MEMORY_PROTECTION |
|
CONFIG_MICROBIT_DISPLAY |
BBC micro:bit 5x5 LED Display support |
CONFIG_MICROBIT_DISPLAY_STR_MAX |
Maximum length of strings that can be shown on the display |
CONFIG_MINIMAL_LIBC_MALLOC_ARENA_SIZE |
Size of the minimal libc malloc arena |
CONFIG_MISRA_SANE |
MISRA standards compliance features |
CONFIG_MODEM |
Modem Drivers |
CONFIG_MODEM_LOG_LEVEL |
|
CONFIG_MODEM_LOG_LEVEL_DBG |
Debug |
CONFIG_MODEM_LOG_LEVEL_ERR |
Error |
CONFIG_MODEM_LOG_LEVEL_INF |
Info |
CONFIG_MODEM_LOG_LEVEL_OFF |
Off |
CONFIG_MODEM_LOG_LEVEL_WRN |
Warning |
CONFIG_MODEM_RECEIVER |
Enable modem receiver helper driver |
CONFIG_MODEM_RECEIVER_MAX_CONTEXTS |
Maximum number of modem receiver contexts |
CONFIG_MODEM_SHELL |
Enable modem shell utilities |
CONFIG_MODEM_WNCM14A2A |
Enable Wistron LTE-M modem driver |
CONFIG_MODEM_WNCM14A2A_APN_NAME |
APN name for establishing network connection |
CONFIG_MODEM_WNCM14A2A_INIT_PRIORITY |
WNC-M14A2A driver init priority |
CONFIG_MODEM_WNCM14A2A_RX_STACK_SIZE |
Size of the stack for the WNC-M14A2A modem driver RX thread |
CONFIG_MODEM_WNCM14A2A_RX_WORKQ_STACK_SIZE |
Size of the stack for the WNC-M14A2A modem driver work queue |
CONFIG_MPU6050 |
MPU6050 Six-Axis Motion Tracking Device |
CONFIG_MPU6050_ACCEL_FS |
Accelerometer full-scale range |
CONFIG_MPU6050_GPIO_DEV_NAME |
GPIO device |
CONFIG_MPU6050_GPIO_PIN_NUM |
Interrupt GPIO pin number |
CONFIG_MPU6050_GYRO_FS |
Gyroscope full-scale range |
CONFIG_MPU6050_I2C_ADDR |
I2C address |
CONFIG_MPU6050_I2C_MASTER_DEV_NAME |
I2C master where MPU6050 is connected |
CONFIG_MPU6050_NAME |
Driver name |
CONFIG_MPU6050_THREAD_PRIORITY |
Thread priority |
CONFIG_MPU6050_THREAD_STACK_SIZE |
Thread stack size |
CONFIG_MPU6050_TRIGGER |
|
CONFIG_MPU6050_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_MPU6050_TRIGGER_NONE |
No trigger |
CONFIG_MPU6050_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_MPU9150 |
Enable MPU9180 support |
CONFIG_MPU9150_I2C_ADDR |
MPU9180 I2C address |
CONFIG_MPU_ALLOW_FLASH_WRITE |
Add MPU access to write to flash |
CONFIG_MPU_LOG_LEVEL |
|
CONFIG_MPU_LOG_LEVEL_DBG |
Debug |
CONFIG_MPU_LOG_LEVEL_ERR |
Error |
CONFIG_MPU_LOG_LEVEL_INF |
Info |
CONFIG_MPU_LOG_LEVEL_OFF |
Off |
CONFIG_MPU_LOG_LEVEL_WRN |
Warning |
CONFIG_MPU_REQUIRES_NON_OVERLAPPING_REGIONS |
|
CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT |
|
CONFIG_MPU_STACK_GUARD |
Thread Stack Guards / Thread Stack Guards |
CONFIG_MP_NUM_CPUS |
Number of CPUs/cores |
CONFIG_MQTT_KEEPALIVE |
Maximum number of clients Keep alive time for MQTT (in seconds) |
CONFIG_MQTT_LIB |
Socket MQTT Library Support |
CONFIG_MQTT_LIB_SOCKS |
SOCKS proxy support for socket MQTT Library |
CONFIG_MQTT_LIB_TLS |
TLS support for socket MQTT Library |
CONFIG_MQTT_LOG_LEVEL |
|
CONFIG_MQTT_LOG_LEVEL_DBG |
Debug |
CONFIG_MQTT_LOG_LEVEL_DEFAULT |
Default |
CONFIG_MQTT_LOG_LEVEL_ERR |
Error |
CONFIG_MQTT_LOG_LEVEL_INF |
Info |
CONFIG_MQTT_LOG_LEVEL_OFF |
Off |
CONFIG_MQTT_LOG_LEVEL_WRN |
Warning |
CONFIG_MQUEUE_NAMELEN_MAX |
Maximum size of a name length |
CONFIG_MS5837 |
MS5837 pressure and temperature sensor |
CONFIG_MSG_COUNT_MAX |
Maximum number of messages in message queue |
CONFIG_MSG_SIZE_MAX |
Maximum size of a message |
CONFIG_MULTITHREADING |
Multi-threading |
CONFIG_MULTI_LEVEL_INTERRUPTS |
Multi-level interrupt support |
CONFIG_MVIC |
Intel Quark D2000 Interrupt Controller (MVIC) |
CONFIG_MVIC_TIMER_IRQ |
IRQ line to use for timer interrupt |
CONFIG_NATIVE_APPLICATION |
Build as a native host application |
CONFIG_NATIVE_POSIX_CONSOLE |
Use the host terminal for console |
CONFIG_NATIVE_POSIX_CONSOLE_INIT_PRIORITY |
Init priority |
CONFIG_NATIVE_POSIX_SLOWDOWN_TO_REAL_TIME |
Slow down execution to real time |
CONFIG_NATIVE_POSIX_STDIN_CONSOLE |
Use the host terminal stdin |
CONFIG_NATIVE_POSIX_STDOUT_CONSOLE |
Print to the host terminal stdout |
CONFIG_NATIVE_POSIX_TIMER |
(POSIX) native_posix timer driver |
CONFIG_NATIVE_STDIN_POLL_PERIOD |
Polling period for stdin |
CONFIG_NATIVE_STDIN_PRIO |
Priority of the stdin polling thread |
CONFIG_NATIVE_UART_0_ON_OWN_PTY |
Connect the UART to its own pseudo terminal |
CONFIG_NATIVE_UART_0_ON_STDINOUT |
Connect the UART to the invoking shell stdin/stdout |
CONFIG_NATIVE_UART_AUTOATTACH_DEFAULT_CMD |
Default command to attach the UART to a new terminal |
CONFIG_NESTED_INTERRUPTS |
Enable nested interrupts |
CONFIG_NETWORKING |
Link layer and IP networking support |
CONFIG_NET_6LO |
Enable 6lowpan IPv6 Compression library |
CONFIG_NET_6LO_CONTEXT |
Enable 6lowpan context based compression |
CONFIG_NET_6LO_LOG_LEVEL |
|
CONFIG_NET_6LO_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_6LO_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_6LO_LOG_LEVEL_ERR |
Error |
CONFIG_NET_6LO_LOG_LEVEL_INF |
Info |
CONFIG_NET_6LO_LOG_LEVEL_OFF |
Off |
CONFIG_NET_6LO_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_ARP |
Enable ARP |
CONFIG_NET_ARP_GRATUITOUS |
Support gratuitous ARP requests/replies. |
CONFIG_NET_ARP_LOG_LEVEL |
|
CONFIG_NET_ARP_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_ARP_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_ARP_LOG_LEVEL_ERR |
Error |
CONFIG_NET_ARP_LOG_LEVEL_INF |
Info |
CONFIG_NET_ARP_LOG_LEVEL_OFF |
Off |
CONFIG_NET_ARP_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_ARP_TABLE_SIZE |
Number of entries in ARP table. |
CONFIG_NET_BUF |
Network buffer support |
CONFIG_NET_BUF_DATA_POOL_SIZE |
Size of the memory pool where buffers are allocated from |
CONFIG_NET_BUF_DATA_SIZE |
Size of each network data fragment |
CONFIG_NET_BUF_FIXED_DATA_SIZE |
Fixed data size buffer |
CONFIG_NET_BUF_LOG |
Network buffer logging |
CONFIG_NET_BUF_LOG_LEVEL |
|
CONFIG_NET_BUF_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_BUF_LOG_LEVEL_ERR |
Error |
CONFIG_NET_BUF_LOG_LEVEL_INF |
Info |
CONFIG_NET_BUF_LOG_LEVEL_OFF |
Off |
CONFIG_NET_BUF_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_BUF_POOL_USAGE |
Network buffer pool usage tracking |
CONFIG_NET_BUF_RX_COUNT |
How many network buffers are allocated for receiving data |
CONFIG_NET_BUF_SIMPLE_LOG |
Network buffer memory debugging |
CONFIG_NET_BUF_TX_COUNT |
How many network buffers are allocated for sending data |
CONFIG_NET_BUF_USER_DATA_SIZE |
Size of user_data available in every network buffer |
CONFIG_NET_BUF_VARIABLE_DATA_SIZE |
Variable data size buffer [EXPERIMENTAL] |
CONFIG_NET_BUF_WARN_ALLOC_INTERVAL |
Interval of Network buffer allocation warnings |
CONFIG_NET_CONFIG_AUTO_INIT |
Init networking support automatically during device startup |
CONFIG_NET_CONFIG_BT_NODE |
Enable Bluetooth node support |
CONFIG_NET_CONFIG_IEEE802154_CHANNEL |
IEEE 802.15.4 channel |
CONFIG_NET_CONFIG_IEEE802154_DEV_NAME |
IEEE 802.15.4 device name |
CONFIG_NET_CONFIG_IEEE802154_PAN_ID |
IEEE 802.15.4 PAN ID |
CONFIG_NET_CONFIG_IEEE802154_RADIO_TX_POWER |
IEEE 802.15.4 TX power in dbm |
CONFIG_NET_CONFIG_IEEE802154_SECURITY_KEY |
IEEE 802.15.4 security key |
CONFIG_NET_CONFIG_IEEE802154_SECURITY_KEY_MODE |
IEEE 802.15.4 security key mode |
CONFIG_NET_CONFIG_IEEE802154_SECURITY_LEVEL |
IEEE 802.15.4 security level (0-7) |
CONFIG_NET_CONFIG_INIT_PRIO |
Startup priority for the network application init |
CONFIG_NET_CONFIG_INIT_TIMEOUT |
How long to wait for networking to be ready and available |
CONFIG_NET_CONFIG_LOG_LEVEL |
|
CONFIG_NET_CONFIG_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_CONFIG_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_CONFIG_LOG_LEVEL_ERR |
Error |
CONFIG_NET_CONFIG_LOG_LEVEL_INF |
Info |
CONFIG_NET_CONFIG_LOG_LEVEL_OFF |
Off |
CONFIG_NET_CONFIG_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_CONFIG_MY_IPV4_ADDR |
My IPv4 address |
CONFIG_NET_CONFIG_MY_IPV4_GW |
My IPv4 gateway |
CONFIG_NET_CONFIG_MY_IPV4_NETMASK |
My IPv4 netmask |
CONFIG_NET_CONFIG_MY_IPV6_ADDR |
My IPv6 address |
CONFIG_NET_CONFIG_NEED_IPV4 |
This application wants IPv4 support |
CONFIG_NET_CONFIG_NEED_IPV6 |
This application wants IPv6 support |
CONFIG_NET_CONFIG_NEED_IPV6_ROUTER |
This application wants IPv6 router to exists |
CONFIG_NET_CONFIG_PEER_IPV4_ADDR |
Peer IPv4 address |
CONFIG_NET_CONFIG_PEER_IPV6_ADDR |
Peer IPv6 address |
CONFIG_NET_CONFIG_SETTINGS |
Set network settings for applications |
CONFIG_NET_CONN_CACHE |
Cache network connections |
CONFIG_NET_CONN_LOG_LEVEL |
|
CONFIG_NET_CONN_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_CONN_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_CONN_LOG_LEVEL_ERR |
Error |
CONFIG_NET_CONN_LOG_LEVEL_INF |
Info |
CONFIG_NET_CONN_LOG_LEVEL_OFF |
Off |
CONFIG_NET_CONN_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_CONTEXT_CHECK |
Check options when calling various net_context functions |
CONFIG_NET_CONTEXT_LOG_LEVEL |
|
CONFIG_NET_CONTEXT_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_CONTEXT_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_CONTEXT_LOG_LEVEL_ERR |
Error |
CONFIG_NET_CONTEXT_LOG_LEVEL_INF |
Info |
CONFIG_NET_CONTEXT_LOG_LEVEL_OFF |
Off |
CONFIG_NET_CONTEXT_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_CONTEXT_NET_PKT_POOL |
Enable net_buf TX pool / context |
CONFIG_NET_CONTEXT_PRIORITY |
Add priority support to net_context |
CONFIG_NET_CONTEXT_SYNC_RECV |
Support synchronous functionality in net_context_recv() API |
CONFIG_NET_CONTEXT_TIMESTAMP |
Add timepstamp support to net_context |
CONFIG_NET_CORE_LOG_LEVEL |
|
CONFIG_NET_CORE_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_CORE_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_CORE_LOG_LEVEL_ERR |
Error |
CONFIG_NET_CORE_LOG_LEVEL_INF |
Info |
CONFIG_NET_CORE_LOG_LEVEL_OFF |
Off |
CONFIG_NET_CORE_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_DEBUG_L2_IEEE802154_DISPLAY_PACKET |
Enable IEEE 802.15.4 packet display |
CONFIG_NET_DEBUG_L2_IEEE802154_DISPLAY_PACKET_FULL |
Print-out both RX and TX packets |
CONFIG_NET_DEBUG_L2_IEEE802154_DISPLAY_PACKET_RX |
Print-out only RX packets |
CONFIG_NET_DEBUG_L2_IEEE802154_DISPLAY_PACKET_TX |
Print-out only TX packets |
CONFIG_NET_DEBUG_L2_IEEE802154_FRAGMENT |
Enable debug support for IEEE 802.15.4 fragmentation |
CONFIG_NET_DEBUG_MGMT_EVENT_STACK |
Enable stack analysis output on Net MGMT event core |
CONFIG_NET_DEBUG_NET_PKT_ALLOC |
Debug network packet and buffer individual allocation |
CONFIG_NET_DEBUG_NET_PKT_EXTERNALS |
How many external network packet allocations |
CONFIG_NET_DEBUG_NET_PKT_NON_FRAGILE_ACCESS |
Reduce r/w fragility by resetting the packet cursor when freed |
CONFIG_NET_DEFAULT_IF_BLUETOOTH |
Bluetooth |
CONFIG_NET_DEFAULT_IF_CANBUS |
Socket CAN interface |
CONFIG_NET_DEFAULT_IF_DUMMY |
Dummy testing interface |
CONFIG_NET_DEFAULT_IF_ETHERNET |
Ethernet |
CONFIG_NET_DEFAULT_IF_FIRST |
First available interface |
CONFIG_NET_DEFAULT_IF_IEEE802154 |
IEEE 802.15.4 |
CONFIG_NET_DEFAULT_IF_OFFLOAD |
Offloaded interface |
CONFIG_NET_DHCPV4 |
Enable DHCPv4 client |
CONFIG_NET_DHCPV4_INITIAL_DELAY_MAX |
Maximum time out for initial discover request |
CONFIG_NET_DHCPV4_LOG_LEVEL |
|
CONFIG_NET_DHCPV4_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_DHCPV4_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_DHCPV4_LOG_LEVEL_ERR |
Error |
CONFIG_NET_DHCPV4_LOG_LEVEL_INF |
Info |
CONFIG_NET_DHCPV4_LOG_LEVEL_OFF |
Off |
CONFIG_NET_DHCPV4_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_GPTP |
Enable IEEE 802.1AS (gPTP) support [EXPERIMENTAL] |
CONFIG_NET_GPTP_ANNOUNCE_RECEIPT_TIMEOUT |
Number of announce intervals to wait |
CONFIG_NET_GPTP_CLOCK_ACCURACY |
|
CONFIG_NET_GPTP_CLOCK_ACCURACY_100MS |
100ms |
CONFIG_NET_GPTP_CLOCK_ACCURACY_100NS |
100ns |
CONFIG_NET_GPTP_CLOCK_ACCURACY_100US |
100us |
CONFIG_NET_GPTP_CLOCK_ACCURACY_10MS |
10ms |
CONFIG_NET_GPTP_CLOCK_ACCURACY_10S |
10s |
CONFIG_NET_GPTP_CLOCK_ACCURACY_10US |
10us |
CONFIG_NET_GPTP_CLOCK_ACCURACY_1MS |
1ms |
CONFIG_NET_GPTP_CLOCK_ACCURACY_1S |
1s |
CONFIG_NET_GPTP_CLOCK_ACCURACY_1US |
1us |
CONFIG_NET_GPTP_CLOCK_ACCURACY_250MS |
250ms |
CONFIG_NET_GPTP_CLOCK_ACCURACY_250NS |
250ns |
CONFIG_NET_GPTP_CLOCK_ACCURACY_250US |
250us |
CONFIG_NET_GPTP_CLOCK_ACCURACY_25MS |
25ms |
CONFIG_NET_GPTP_CLOCK_ACCURACY_25NS |
25ns |
CONFIG_NET_GPTP_CLOCK_ACCURACY_25US |
25us |
CONFIG_NET_GPTP_CLOCK_ACCURACY_2_5MS |
1.5ms |
CONFIG_NET_GPTP_CLOCK_ACCURACY_2_5US |
2.5us |
CONFIG_NET_GPTP_CLOCK_ACCURACY_GT_10S |
> 10s |
CONFIG_NET_GPTP_CLOCK_ACCURACY_UNKNOWN |
Unknown |
CONFIG_NET_GPTP_GM_CAPABLE |
Enable IEEE 802.1AS GrandMaster Capability |
CONFIG_NET_GPTP_INIT_LOG_ANNOUNCE_ITV |
Set initial announce interval in Log2 base |
CONFIG_NET_GPTP_INIT_LOG_PDELAY_REQ_ITV |
Set initial pdelay request interval in Log2 base |
CONFIG_NET_GPTP_INIT_LOG_SYNC_ITV |
Set initial sync interval in Log2 base |
CONFIG_NET_GPTP_LOG_LEVEL |
|
CONFIG_NET_GPTP_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_GPTP_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_GPTP_LOG_LEVEL_ERR |
Error |
CONFIG_NET_GPTP_LOG_LEVEL_INF |
Info |
CONFIG_NET_GPTP_LOG_LEVEL_OFF |
Off |
CONFIG_NET_GPTP_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_GPTP_NEIGHBOR_PROP_DELAY_THR |
Set neighbor propagation delay threshold (ns) |
CONFIG_NET_GPTP_NUM_PORTS |
Number of gPTP ports |
CONFIG_NET_GPTP_PATH_TRACE_ELEMENTS |
How many path trace elements to track |
CONFIG_NET_GPTP_PROBE_CLOCK_SOURCE_ON_DEMAND |
Probe clock source on demand |
CONFIG_NET_GPTP_STATISTICS |
Collect gPTP statistics |
CONFIG_NET_GPTP_SYNC_RECEIPT_TIMEOUT |
Number of sync intervals to wait |
CONFIG_NET_GPTP_USE_DEFAULT_CLOCK_UPDATE |
Use a default clock update function |
CONFIG_NET_GPTP_VLAN |
Run gPTP over VLAN link |
CONFIG_NET_GPTP_VLAN_TAG |
VLAN tag to use |
CONFIG_NET_HEADERS_ALWAYS_CONTIGUOUS |
|
CONFIG_NET_HOSTNAME |
The hostname of this device |
CONFIG_NET_HOSTNAME_ENABLE |
Add hostname to the device |
CONFIG_NET_HOSTNAME_LOG_LEVEL |
|
CONFIG_NET_HOSTNAME_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_HOSTNAME_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_HOSTNAME_LOG_LEVEL_ERR |
Error |
CONFIG_NET_HOSTNAME_LOG_LEVEL_INF |
Info |
CONFIG_NET_HOSTNAME_LOG_LEVEL_OFF |
Off |
CONFIG_NET_HOSTNAME_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_HOSTNAME_UNIQUE |
Make hostname unique |
CONFIG_NET_ICMPV4_ACCEPT_BROADCAST |
Accept broadcast ICMPv4 echo-request |
CONFIG_NET_ICMPV4_LOG_LEVEL |
|
CONFIG_NET_ICMPV4_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_ICMPV4_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_ICMPV4_LOG_LEVEL_ERR |
Error |
CONFIG_NET_ICMPV4_LOG_LEVEL_INF |
Info |
CONFIG_NET_ICMPV4_LOG_LEVEL_OFF |
Off |
CONFIG_NET_ICMPV4_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_ICMPV6_LOG_LEVEL |
|
CONFIG_NET_ICMPV6_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_ICMPV6_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_ICMPV6_LOG_LEVEL_ERR |
Error |
CONFIG_NET_ICMPV6_LOG_LEVEL_INF |
Info |
CONFIG_NET_ICMPV6_LOG_LEVEL_OFF |
Off |
CONFIG_NET_ICMPV6_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_IF_IPV6_PREFIX_COUNT |
Max number of IPv6 prefixes per network interface |
CONFIG_NET_IF_LOG_LEVEL |
|
CONFIG_NET_IF_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_IF_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_IF_LOG_LEVEL_ERR |
Error |
CONFIG_NET_IF_LOG_LEVEL_INF |
Info |
CONFIG_NET_IF_LOG_LEVEL_OFF |
Off |
CONFIG_NET_IF_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_IF_MAX_IPV4_COUNT |
Max number of IPv4 network interfaces in the system |
CONFIG_NET_IF_MAX_IPV6_COUNT |
Max number of IPv6 network interfaces in the system |
CONFIG_NET_IF_MCAST_IPV4_ADDR_COUNT |
Max number of multicast IPv4 addresses per network interface |
CONFIG_NET_IF_MCAST_IPV6_ADDR_COUNT |
Max number of multicast IPv6 addresses per network interface |
CONFIG_NET_IF_UNICAST_IPV4_ADDR_COUNT |
Max number of unicast IPv4 addresses per network interface |
CONFIG_NET_IF_UNICAST_IPV6_ADDR_COUNT |
Max number of unicast IPv6 addresses per network interface |
CONFIG_NET_INITIAL_HOP_LIMIT |
Initial hop limit for a connection |
CONFIG_NET_INITIAL_TTL |
Initial time to live for a connection |
CONFIG_NET_INIT_PRIO |
|
CONFIG_NET_IPV4 |
IPv4 |
CONFIG_NET_IPV4_ACCEPT_ZERO_BROADCAST |
Accept 0.0.0.0 broadcast destination address |
CONFIG_NET_IPV4_AUTO |
Enable IPv4 autoconfiguration [EXPERIMENTAL] |
CONFIG_NET_IPV4_AUTO_LOG_LEVEL |
|
CONFIG_NET_IPV4_AUTO_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_IPV4_AUTO_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_IPV4_AUTO_LOG_LEVEL_ERR |
Error |
CONFIG_NET_IPV4_AUTO_LOG_LEVEL_INF |
Info |
CONFIG_NET_IPV4_AUTO_LOG_LEVEL_OFF |
Off |
CONFIG_NET_IPV4_AUTO_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_IPV4_LOG_LEVEL |
|
CONFIG_NET_IPV4_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_IPV4_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_IPV4_LOG_LEVEL_ERR |
Error |
CONFIG_NET_IPV4_LOG_LEVEL_INF |
Info |
CONFIG_NET_IPV4_LOG_LEVEL_OFF |
Off |
CONFIG_NET_IPV4_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_IPV6 |
IPv6 |
CONFIG_NET_IPV6_DAD |
Activate duplicate address detection |
CONFIG_NET_IPV6_FRAGMENT |
Support IPv6 fragmentation |
CONFIG_NET_IPV6_FRAGMENT_MAX_COUNT |
How many packets to reassemble at a time |
CONFIG_NET_IPV6_FRAGMENT_TIMEOUT |
How long to wait the fragments to receive |
CONFIG_NET_IPV6_LOG_LEVEL |
|
CONFIG_NET_IPV6_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_IPV6_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_IPV6_LOG_LEVEL_ERR |
Error |
CONFIG_NET_IPV6_LOG_LEVEL_INF |
Info |
CONFIG_NET_IPV6_LOG_LEVEL_OFF |
Off |
CONFIG_NET_IPV6_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_IPV6_MAX_NEIGHBORS |
How many IPv6 neighbors are supported |
CONFIG_NET_IPV6_MLD |
Multicast Listener Discovery support |
CONFIG_NET_IPV6_NBR_CACHE |
Neighbor cache |
CONFIG_NET_IPV6_NBR_CACHE_LOG_LEVEL |
|
CONFIG_NET_IPV6_NBR_CACHE_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_IPV6_NBR_CACHE_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_IPV6_NBR_CACHE_LOG_LEVEL_ERR |
Error |
CONFIG_NET_IPV6_NBR_CACHE_LOG_LEVEL_INF |
Info |
CONFIG_NET_IPV6_NBR_CACHE_LOG_LEVEL_OFF |
Off |
CONFIG_NET_IPV6_NBR_CACHE_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_IPV6_ND |
Activate neighbor discovery |
CONFIG_NET_IPV6_RA_RDNSS |
Support RA RDNSS option |
CONFIG_NET_IP_ADDR_CHECK |
Check IP address validity before sending IP packet |
CONFIG_NET_L2_BT |
Enable Bluetooth support |
CONFIG_NET_L2_BT_LOG_LEVEL |
|
CONFIG_NET_L2_BT_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_L2_BT_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_L2_BT_LOG_LEVEL_ERR |
Error |
CONFIG_NET_L2_BT_LOG_LEVEL_INF |
Info |
CONFIG_NET_L2_BT_LOG_LEVEL_OFF |
Off |
CONFIG_NET_L2_BT_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_L2_BT_MGMT |
Enable Bluetooth Network Management support |
CONFIG_NET_L2_BT_SEC_LEVEL |
Security level of Bluetooth Link |
CONFIG_NET_L2_BT_SHELL |
Enable Bluetooth shell module |
CONFIG_NET_L2_BT_ZEP1656 |
*Workaround to work with Linux.* |
CONFIG_NET_L2_CANBUS |
Enable CANBUS l2 layer |
CONFIG_NET_L2_DUMMY |
Enable dummy l2 layer |
CONFIG_NET_L2_ETHERNET |
Enable Ethernet support |
CONFIG_NET_L2_ETHERNET_LOG_LEVEL |
|
CONFIG_NET_L2_ETHERNET_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_L2_ETHERNET_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_L2_ETHERNET_LOG_LEVEL_ERR |
Error |
CONFIG_NET_L2_ETHERNET_LOG_LEVEL_INF |
Info |
CONFIG_NET_L2_ETHERNET_LOG_LEVEL_OFF |
Off |
CONFIG_NET_L2_ETHERNET_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_L2_ETHERNET_MGMT |
Enable Ethernet network management interface |
CONFIG_NET_L2_IEEE802154 |
Enable IEEE 802.15.4 Radio |
CONFIG_NET_L2_IEEE802154_ACK_REPLY |
Enable IEEE 802.15.4 ACK reply logic |
CONFIG_NET_L2_IEEE802154_FRAGMENT |
Enable 802.15.4 fragmentation support |
CONFIG_NET_L2_IEEE802154_FRAGMENT_REASS_CACHE_SIZE |
IEEE 802.15.4 Reassembly cache size |
CONFIG_NET_L2_IEEE802154_LOG_LEVEL |
|
CONFIG_NET_L2_IEEE802154_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_L2_IEEE802154_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_L2_IEEE802154_LOG_LEVEL_ERR |
Error |
CONFIG_NET_L2_IEEE802154_LOG_LEVEL_INF |
Info |
CONFIG_NET_L2_IEEE802154_LOG_LEVEL_OFF |
Off |
CONFIG_NET_L2_IEEE802154_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_L2_IEEE802154_MGMT |
|
CONFIG_NET_L2_IEEE802154_RADIO_ALOHA |
IEEE 802.15.4 Aloha radio protocol |
CONFIG_NET_L2_IEEE802154_RADIO_CSMA_CA |
IEEE 802.15.4 CSMA-CA radio protocol |
CONFIG_NET_L2_IEEE802154_RADIO_CSMA_CA_MAX_BE |
CSMA MAC maximum backoff exponent |
CONFIG_NET_L2_IEEE802154_RADIO_CSMA_CA_MAX_BO |
CSMA maximum backoffs |
CONFIG_NET_L2_IEEE802154_RADIO_CSMA_CA_MIN_BE |
CSMA MAC minimum backoff exponent |
CONFIG_NET_L2_IEEE802154_RADIO_DFLT_TX_POWER |
Default radio transmission power |
CONFIG_NET_L2_IEEE802154_RADIO_TX_RETRIES |
Radio Transmission attempts |
CONFIG_NET_L2_IEEE802154_REASSEMBLY_TIMEOUT |
IEEE 802.15.4 Reassembly timeout in seconds |
CONFIG_NET_L2_IEEE802154_RFD |
Support Reduced Functionality Device level |
CONFIG_NET_L2_IEEE802154_SECURITY |
Enable IEEE 802.15.4 security [EXPERIMENTAL] |
CONFIG_NET_L2_IEEE802154_SECURITY_CRYPTO_DEV_NAME |
Crypto device name used for <en/de>cryption |
CONFIG_NET_L2_IEEE802154_SHELL |
Enable IEEE 802.15.4 shell module |
CONFIG_NET_L2_IEEE802154_SUB_GHZ |
|
CONFIG_NET_L2_OPENTHREAD |
OpenThread L2 |
CONFIG_NET_L2_WIFI_MGMT |
Enable WiFi Management support |
CONFIG_NET_L2_WIFI_MGMT_LOG_LEVEL |
|
CONFIG_NET_L2_WIFI_MGMT_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_L2_WIFI_MGMT_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_L2_WIFI_MGMT_LOG_LEVEL_ERR |
Error |
CONFIG_NET_L2_WIFI_MGMT_LOG_LEVEL_INF |
Info |
CONFIG_NET_L2_WIFI_MGMT_LOG_LEVEL_OFF |
Off |
CONFIG_NET_L2_WIFI_MGMT_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_L2_WIFI_SHELL |
Enable WiFi shell module |
CONFIG_NET_LLDP |
Enable LLDP |
CONFIG_NET_LLDP_CHASSIS_ID |
Chassis ID value |
CONFIG_NET_LLDP_CHASSIS_ID_MAC0 |
Chassis ID MAC Address Byte 0 |
CONFIG_NET_LLDP_CHASSIS_ID_MAC1 |
Chassis ID MAC Address Byte 1 |
CONFIG_NET_LLDP_CHASSIS_ID_MAC2 |
Chassis ID MAC Address Byte 2 |
CONFIG_NET_LLDP_CHASSIS_ID_MAC3 |
Chassis ID MAC Address Byte 3 |
CONFIG_NET_LLDP_CHASSIS_ID_MAC4 |
Chassis ID MAC Address Byte 4 |
CONFIG_NET_LLDP_CHASSIS_ID_MAC5 |
Chassis ID MAC Address Byte 5 |
CONFIG_NET_LLDP_CHASSIS_ID_SUBTYPE |
Chassis ID TLV subtype |
CONFIG_NET_LLDP_END_LLDPDU_TLV_ENABLED |
Enable End of LLDPDU TLV |
CONFIG_NET_LLDP_LOG_LEVEL |
|
CONFIG_NET_LLDP_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_LLDP_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_LLDP_LOG_LEVEL_ERR |
Error |
CONFIG_NET_LLDP_LOG_LEVEL_INF |
Info |
CONFIG_NET_LLDP_LOG_LEVEL_OFF |
Off |
CONFIG_NET_LLDP_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_LLDP_PORT_ID |
Port ID value |
CONFIG_NET_LLDP_PORT_ID_MAC0 |
Chassis ID MAC Address Byte 0 |
CONFIG_NET_LLDP_PORT_ID_MAC1 |
Chassis ID MAC Address Byte 1 |
CONFIG_NET_LLDP_PORT_ID_MAC2 |
Chassis ID MAC Address Byte 2 |
CONFIG_NET_LLDP_PORT_ID_MAC3 |
Chassis ID MAC Address Byte 3 |
CONFIG_NET_LLDP_PORT_ID_MAC4 |
Chassis ID MAC Address Byte 4 |
CONFIG_NET_LLDP_PORT_ID_MAC5 |
Chassis ID MAC Address Byte 5 |
CONFIG_NET_LLDP_PORT_ID_SUBTYPE |
Port ID TLV subtype |
CONFIG_NET_LLDP_TX_HOLD |
Multiplier of Tx Interval to result on Time to Live value |
CONFIG_NET_LLDP_TX_INTERVAL |
Time between transmissions in seconds (msgTxInterval) |
CONFIG_NET_LOG |
Enable network stack logging and debugging |
CONFIG_NET_LOOPBACK |
Net loopback driver |
CONFIG_NET_LOOPBACK_LOG_LEVEL |
|
CONFIG_NET_LOOPBACK_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_LOOPBACK_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_LOOPBACK_LOG_LEVEL_ERR |
Error |
CONFIG_NET_LOOPBACK_LOG_LEVEL_INF |
Info |
CONFIG_NET_LOOPBACK_LOG_LEVEL_OFF |
Off |
CONFIG_NET_LOOPBACK_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_MAX_6LO_CONTEXTS |
Number of supported 6CO (6lowpan contexts options) |
CONFIG_NET_MAX_CONN |
How many network connections are supported |
CONFIG_NET_MAX_CONTEXTS |
Number of network contexts to allocate |
CONFIG_NET_MAX_MCAST_ROUTES |
Max number of multicast routing entries stored. |
CONFIG_NET_MAX_NEXTHOPS |
Max number of next hop entries stored. |
CONFIG_NET_MAX_ROUTERS |
How many routers are supported |
CONFIG_NET_MAX_ROUTES |
Max number of routing entries stored. |
CONFIG_NET_MGMT |
Network Management API |
CONFIG_NET_MGMT_EVENT |
Add support for runtime network event notifications |
CONFIG_NET_MGMT_EVENT_INFO |
Enable passing information along with an event |
CONFIG_NET_MGMT_EVENT_LOG_LEVEL |
|
CONFIG_NET_MGMT_EVENT_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_MGMT_EVENT_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_MGMT_EVENT_LOG_LEVEL_ERR |
Error |
CONFIG_NET_MGMT_EVENT_LOG_LEVEL_INF |
Info |
CONFIG_NET_MGMT_EVENT_LOG_LEVEL_OFF |
Off |
CONFIG_NET_MGMT_EVENT_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_MGMT_EVENT_QUEUE_SIZE |
Size of event queue |
CONFIG_NET_MGMT_EVENT_STACK_SIZE |
Stack size for the inner thread handling event callbacks |
CONFIG_NET_MGMT_EVENT_THREAD_PRIO |
Inner thread priority (use with care) |
CONFIG_NET_OFFLOAD |
Offload IP stack [EXPERIMENTAL] |
CONFIG_NET_OFFLOAD_LOG_LEVEL |
|
CONFIG_NET_OFFLOAD_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_OFFLOAD_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_OFFLOAD_LOG_LEVEL_ERR |
Error |
CONFIG_NET_OFFLOAD_LOG_LEVEL_INF |
Info |
CONFIG_NET_OFFLOAD_LOG_LEVEL_OFF |
Off |
CONFIG_NET_OFFLOAD_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_PKT_LOG_LEVEL |
|
CONFIG_NET_PKT_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_PKT_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_PKT_LOG_LEVEL_ERR |
Error |
CONFIG_NET_PKT_LOG_LEVEL_INF |
Info |
CONFIG_NET_PKT_LOG_LEVEL_OFF |
Off |
CONFIG_NET_PKT_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_PKT_RX_COUNT |
How many packet receives can be pending at the same time |
CONFIG_NET_PKT_TIMESTAMP |
Enable network packet timestamp support |
CONFIG_NET_PKT_TIMESTAMP_STACK_SIZE |
Timestamp thread stack size |
CONFIG_NET_PKT_TX_COUNT |
How many packet sends can be pending at the same time |
CONFIG_NET_PROMISCUOUS_MODE |
Enable promiscuous mode support [EXPERIMENTAL] |
CONFIG_NET_PROMISC_LOG_LEVEL |
|
CONFIG_NET_PROMISC_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_PROMISC_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_PROMISC_LOG_LEVEL_ERR |
Error |
CONFIG_NET_PROMISC_LOG_LEVEL_INF |
Info |
CONFIG_NET_PROMISC_LOG_LEVEL_OFF |
Off |
CONFIG_NET_PROMISC_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_QEMU_ETHERNET |
Ethernet |
CONFIG_NET_QEMU_SLIP |
SLIP |
CONFIG_NET_RAW_MODE |
|
CONFIG_NET_ROUTE |
|
CONFIG_NET_ROUTE_LOG_LEVEL |
|
CONFIG_NET_ROUTE_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_ROUTE_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_ROUTE_LOG_LEVEL_ERR |
Error |
CONFIG_NET_ROUTE_LOG_LEVEL_INF |
Info |
CONFIG_NET_ROUTE_LOG_LEVEL_OFF |
Off |
CONFIG_NET_ROUTE_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_ROUTE_MCAST |
|
CONFIG_NET_ROUTING |
IP routing between interfaces |
CONFIG_NET_RX_STACK_SIZE |
RX thread stack size |
CONFIG_NET_SHELL |
Enable network shell utilities |
CONFIG_NET_SHELL_DYN_CMD_COMPLETION |
Enable network shell dynamic command completion |
CONFIG_NET_SLIP_TAP |
TAP SLIP driver |
CONFIG_NET_SOCKETS |
BSD Sockets compatible API |
CONFIG_NET_SOCKETS_CAN |
Enable socket CAN support [EXPERIMENTAL] |
CONFIG_NET_SOCKETS_CONNECT_TIMEOUT |
Timeout value in milliseconds to CONNECT |
CONFIG_NET_SOCKETS_DNS_TIMEOUT |
Timeout value in milliseconds for DNS queries |
CONFIG_NET_SOCKETS_DTLS_TIMEOUT |
Timeout value in milliseconds for DTLS connection |
CONFIG_NET_SOCKETS_ENABLE_DTLS |
Enable DTLS socket support [EXPERIMENTAL] |
CONFIG_NET_SOCKETS_LOG_LEVEL |
|
CONFIG_NET_SOCKETS_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_SOCKETS_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_SOCKETS_LOG_LEVEL_ERR |
Error |
CONFIG_NET_SOCKETS_LOG_LEVEL_INF |
Info |
CONFIG_NET_SOCKETS_LOG_LEVEL_OFF |
Off |
CONFIG_NET_SOCKETS_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_SOCKETS_OFFLOAD |
Offload Socket APIs [EXPERIMENTAL] |
CONFIG_NET_SOCKETS_PACKET |
Enable packet socket support |
CONFIG_NET_SOCKETS_POLL_MAX |
Max number of supported poll() entries |
CONFIG_NET_SOCKETS_POSIX_NAMES |
Standard POSIX names for Sockets API |
CONFIG_NET_SOCKETS_SOCKOPT_TLS |
Enable TCP TLS socket option support [EXPERIMENTAL] |
CONFIG_NET_SOCKETS_TLS_MAX_CIPHERSUITES |
Maximum number of TLS/DTLS ciphersuites per socket |
CONFIG_NET_SOCKETS_TLS_MAX_CONTEXTS |
Maximum number of TLS/DTLS contexts |
CONFIG_NET_SOCKETS_TLS_MAX_CREDENTIALS |
Maximum number of TLS/DTLS credentials per socket |
CONFIG_NET_STATISTICS |
Network statistics |
CONFIG_NET_STATISTICS_ETHERNET |
Ethernet statistics |
CONFIG_NET_STATISTICS_ETHERNET_VENDOR |
Vendor specific Ethernet statistics |
CONFIG_NET_STATISTICS_ICMP |
ICMP statistics |
CONFIG_NET_STATISTICS_IPV4 |
IPv4 statistics |
CONFIG_NET_STATISTICS_IPV6 |
IPv6 statistics |
CONFIG_NET_STATISTICS_IPV6_ND |
IPv6 statistics |
CONFIG_NET_STATISTICS_LOG_LEVEL |
|
CONFIG_NET_STATISTICS_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_STATISTICS_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_STATISTICS_LOG_LEVEL_ERR |
Error |
CONFIG_NET_STATISTICS_LOG_LEVEL_INF |
Info |
CONFIG_NET_STATISTICS_LOG_LEVEL_OFF |
Off |
CONFIG_NET_STATISTICS_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_STATISTICS_MLD |
Multicast Listener Discovery (MLD) statistics |
CONFIG_NET_STATISTICS_PERIODIC_OUTPUT |
Simple periodic output |
CONFIG_NET_STATISTICS_PER_INTERFACE |
Collect statistics per network interface |
CONFIG_NET_STATISTICS_TCP |
TCP statistics |
CONFIG_NET_STATISTICS_UDP |
UDP statistics |
CONFIG_NET_STATISTICS_USER_API |
Expose statistics through NET MGMT API |
CONFIG_NET_TCP |
Enable TCP |
CONFIG_NET_TCP_ACK_TIMEOUT |
How long to wait for ACK (in milliseconds) |
CONFIG_NET_TCP_BACKLOG_SIZE |
Number of simultaneous incoming TCP connections |
CONFIG_NET_TCP_CHECKSUM |
Check TCP checksum |
CONFIG_NET_TCP_INIT_RETRANSMISSION_TIMEOUT |
Initial value of Retransmission Timeout (RTO) (in milliseconds) |
CONFIG_NET_TCP_LOG_LEVEL |
|
CONFIG_NET_TCP_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_TCP_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_TCP_LOG_LEVEL_ERR |
Error |
CONFIG_NET_TCP_LOG_LEVEL_INF |
Info |
CONFIG_NET_TCP_LOG_LEVEL_OFF |
Off |
CONFIG_NET_TCP_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_TCP_RETRY_COUNT |
Maximum number of TCP segment retransmissions |
CONFIG_NET_TCP_TIME_WAIT_DELAY |
How long to wait in TIME_WAIT state (in milliseconds) |
CONFIG_NET_TC_LOG_LEVEL |
|
CONFIG_NET_TC_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_TC_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_TC_LOG_LEVEL_ERR |
Error |
CONFIG_NET_TC_LOG_LEVEL_INF |
Info |
CONFIG_NET_TC_LOG_LEVEL_OFF |
Off |
CONFIG_NET_TC_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_TC_MAPPING_SR_CLASS_A_AND_B |
SR class A and class B mapping |
CONFIG_NET_TC_MAPPING_SR_CLASS_B_ONLY |
SR class B only mapping |
CONFIG_NET_TC_MAPPING_STRICT |
Strict priority mapping |
CONFIG_NET_TC_RX_COUNT |
How many Rx traffic classes to have for each network device |
CONFIG_NET_TC_TX_COUNT |
How many Tx traffic classes to have for each network device |
CONFIG_NET_TEST |
Network Testing |
CONFIG_NET_TRICKLE |
Enable Trickle library |
CONFIG_NET_TRICKLE_LOG_LEVEL |
|
CONFIG_NET_TRICKLE_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_TRICKLE_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_TRICKLE_LOG_LEVEL_ERR |
Error |
CONFIG_NET_TRICKLE_LOG_LEVEL_INF |
Info |
CONFIG_NET_TRICKLE_LOG_LEVEL_OFF |
Off |
CONFIG_NET_TRICKLE_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_TX_DEFAULT_PRIORITY |
Default network packet priority if none have been set |
CONFIG_NET_TX_STACK_SIZE |
TX thread stack size |
CONFIG_NET_UDP |
Enable UDP |
CONFIG_NET_UDP_CHECKSUM |
Check UDP checksum |
CONFIG_NET_UDP_LOG_LEVEL |
|
CONFIG_NET_UDP_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_UDP_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_UDP_LOG_LEVEL_ERR |
Error |
CONFIG_NET_UDP_LOG_LEVEL_INF |
Info |
CONFIG_NET_UDP_LOG_LEVEL_OFF |
Off |
CONFIG_NET_UDP_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_UDP_MISSING_CHECKSUM |
Accept missing checksum (IPv4 only) |
CONFIG_NET_UTILS_LOG_LEVEL |
|
CONFIG_NET_UTILS_LOG_LEVEL_DBG |
Debug |
CONFIG_NET_UTILS_LOG_LEVEL_DEFAULT |
Default |
CONFIG_NET_UTILS_LOG_LEVEL_ERR |
Error |
CONFIG_NET_UTILS_LOG_LEVEL_INF |
Info |
CONFIG_NET_UTILS_LOG_LEVEL_OFF |
Off |
CONFIG_NET_UTILS_LOG_LEVEL_WRN |
Warning |
CONFIG_NET_VLAN |
Enable virtual lan support |
CONFIG_NET_VLAN_COUNT |
Max VLAN tags supported in the system |
CONFIG_NEURAL_NET_ACCEL |
Neural Network Accelerator Drivers |
CONFIG_NEURAL_NET_LOG_LEVEL |
|
CONFIG_NEURAL_NET_LOG_LEVEL_DBG |
Debug |
CONFIG_NEURAL_NET_LOG_LEVEL_ERR |
Error |
CONFIG_NEURAL_NET_LOG_LEVEL_INF |
Info |
CONFIG_NEURAL_NET_LOG_LEVEL_OFF |
Off |
CONFIG_NEURAL_NET_LOG_LEVEL_WRN |
Warning |
CONFIG_NEWLIB_LIBC |
Build with newlib c library |
CONFIG_NEWLIB_LIBC_ALIGNED_HEAP_SIZE |
Newlib aligned heap size |
CONFIG_NEWLIB_LIBC_FLOAT_PRINTF |
Build with newlib float printf |
CONFIG_NEWLIB_LIBC_FLOAT_SCANF |
Build with newlib float scanf |
CONFIG_NFCT_PINS_AS_GPIOS |
NFCT pins as GPIOs |
CONFIG_NFFS_FILESYSTEM_MAX_AREAS |
Maximum number of areas |
CONFIG_NFFS_FILESYSTEM_MAX_BLOCK_SIZE |
Maximum block size |
CONFIG_NIOS2 |
Nios II Gen 2 architecture |
CONFIG_NOCACHE_MEMORY |
Support for uncached memory |
CONFIG_NO_OPTIMIZATIONS |
Optimize nothing |
CONFIG_NRFX_ADC |
|
CONFIG_NRFX_CLOCK |
|
CONFIG_NRFX_DPPI |
|
CONFIG_NRFX_GPIOTE |
|
CONFIG_NRFX_NFCT |
|
CONFIG_NRFX_PPI |
|
CONFIG_NRFX_PRS |
|
CONFIG_NRFX_PWM |
|
CONFIG_NRFX_QDEC |
|
CONFIG_NRFX_RTC |
|
CONFIG_NRFX_RTC0 |
|
CONFIG_NRFX_RTC1 |
|
CONFIG_NRFX_RTC2 |
|
CONFIG_NRFX_SAADC |
|
CONFIG_NRFX_SPI |
|
CONFIG_NRFX_SPIM |
|
CONFIG_NRFX_SPIS |
|
CONFIG_NRFX_SYSTICK |
|
CONFIG_NRFX_TIMER |
|
CONFIG_NRFX_TIMER0 |
|
CONFIG_NRFX_TIMER1 |
|
CONFIG_NRFX_TIMER2 |
|
CONFIG_NRFX_TIMER3 |
|
CONFIG_NRFX_TIMER4 |
|
CONFIG_NRFX_TWI |
|
CONFIG_NRFX_TWIM |
|
CONFIG_NRFX_UART |
|
CONFIG_NRFX_UARTE |
|
CONFIG_NRFX_UARTE0 |
|
CONFIG_NRFX_UARTE1 |
|
CONFIG_NRFX_UARTE2 |
|
CONFIG_NRFX_UARTE3 |
|
CONFIG_NRFX_USBD |
|
CONFIG_NRFX_WDT |
|
CONFIG_NRF_ENABLE_ICACHE |
Enable the instruction cache (I-Cache) / Enable the instruction cache (I-Cache) |
CONFIG_NRF_RTC_TIMER |
nRF Real Time Counter (NRF_RTC1) Timer |
CONFIG_NRF_UARTE_PERIPHERAL |
|
CONFIG_NRF_UART_PERIPHERAL |
|
CONFIG_NUM_2ND_LEVEL_AGGREGATORS |
Total number of second level interrupt aggregators |
CONFIG_NUM_3RD_LEVEL_AGGREGATORS |
Total number of third level interrupt aggregators |
CONFIG_NUM_COOP_PRIORITIES |
Number of coop priorities |
CONFIG_NUM_IRQS |
Upper limit of interrupt numbers/IDs used |
CONFIG_NUM_IRQ_PRIO_LEVELS |
Number of supported interrupt priority levels |
CONFIG_NUM_MBOX_ASYNC_MSGS |
Maximum number of in-flight asynchronous mailbox messages |
CONFIG_NUM_METAIRQ_PRIORITIES |
Number of very-high priority ‘preemptor’ threads |
CONFIG_NUM_PIPE_ASYNC_MSGS |
Maximum number of in-flight asynchronous pipe messages |
CONFIG_NUM_PREEMPT_PRIORITIES |
Number of preemptible priorities |
CONFIG_NVS |
Non-volatile Storage |
CONFIG_NVS_LOG_LEVEL |
|
CONFIG_NVS_LOG_LEVEL_DBG |
Debug |
CONFIG_NVS_LOG_LEVEL_ERR |
Error |
CONFIG_NVS_LOG_LEVEL_INF |
Info |
CONFIG_NVS_LOG_LEVEL_OFF |
Off |
CONFIG_NVS_LOG_LEVEL_WRN |
Warning |
CONFIG_NVS_PROTECT_FLASH |
Non-volatile Storage extra flash protection |
CONFIG_NXP_IMX_RT_BOOT_HEADER |
Enable the boot header |
CONFIG_OBJECT_TRACING |
Kernel object tracing |
CONFIG_OFFLOAD_WORKQUEUE_PRIORITY |
Offload requests workqueue priority |
CONFIG_OFFLOAD_WORKQUEUE_STACK_SIZE |
Workqueue stack size for thread offload requests |
CONFIG_OMIT_FRAME_POINTER |
Omit frame pointer |
CONFIG_OPENAMP |
OpenAMP Support |
CONFIG_OPENAMP_SRC_PATH |
OpenAMP library source path |
CONFIG_OPENOCD_SUPPORT |
OpenOCD support [EXPERIMENTAL] |
CONFIG_OPENTHREAD_CHANNEL |
Default Channel |
CONFIG_OPENTHREAD_COMMISSIONER |
Commissioner functions support |
CONFIG_OPENTHREAD_DEBUG |
OpenThread stack log support |
CONFIG_OPENTHREAD_DIAG |
Diagnostic functions support |
CONFIG_OPENTHREAD_FTD |
FTD - Full Thread Device |
CONFIG_OPENTHREAD_JAM_DETECTION |
Jam detection support |
CONFIG_OPENTHREAD_JOINER |
Joiner functions support |
CONFIG_OPENTHREAD_JOINER_AUTOSTART |
Support for automatic joiner start |
CONFIG_OPENTHREAD_JOINER_PSKD |
Default Pre Shared key for the Device to start joiner |
CONFIG_OPENTHREAD_L2_DEBUG |
OpenThread L2 log support |
CONFIG_OPENTHREAD_L2_DEBUG_DUMP_15_4 |
Dump 802.15.4 packets |
CONFIG_OPENTHREAD_L2_DEBUG_DUMP_IPV6 |
Dump IPv6 packets |
CONFIG_OPENTHREAD_L2_LOG_LEVEL |
|
CONFIG_OPENTHREAD_L2_LOG_LEVEL_DBG |
Debug |
CONFIG_OPENTHREAD_L2_LOG_LEVEL_DEFAULT |
Default |
CONFIG_OPENTHREAD_L2_LOG_LEVEL_ERR |
Error |
CONFIG_OPENTHREAD_L2_LOG_LEVEL_INF |
Info |
CONFIG_OPENTHREAD_L2_LOG_LEVEL_OFF |
Off |
CONFIG_OPENTHREAD_L2_LOG_LEVEL_WRN |
Warning |
CONFIG_OPENTHREAD_LOG_LEVEL |
|
CONFIG_OPENTHREAD_LOG_LEVEL_DEBUG |
Debug |
CONFIG_OPENTHREAD_LOG_LEVEL_ERROR |
Error |
CONFIG_OPENTHREAD_LOG_LEVEL_INFO |
Info |
CONFIG_OPENTHREAD_LOG_LEVEL_WARNING |
Warning |
CONFIG_OPENTHREAD_MTD |
MTD - Minimal Thread Device |
CONFIG_OPENTHREAD_NETWORK_NAME |
Default network name |
CONFIG_OPENTHREAD_PANID |
Default PAN ID |
CONFIG_OPENTHREAD_PKT_LIST_SIZE |
List size for Ip6 packet buffering |
CONFIG_OPENTHREAD_PLAT |
|
CONFIG_OPENTHREAD_PLATFORM_INFO |
Platform information for OpenThread |
CONFIG_OPENTHREAD_SHELL |
Enable OpenThread shell |
CONFIG_OPENTHREAD_THREAD_PRIORITY |
OpenThread thread priority |
CONFIG_OPENTHREAD_THREAD_STACK_SIZE |
OpenThread thread stack size |
CONFIG_OPENTHREAD_XPANID |
Default Extended PAN ID |
CONFIG_OSC_EXTERNAL |
External reference clock |
CONFIG_OSC_HIGH_GAIN |
High gain oscillator |
CONFIG_OSC_LOW_POWER |
Low power oscillator |
CONFIG_OSC_XTAL0_FREQ |
External oscillator frequency |
CONFIG_OS_MGMT_ECHO |
Support for echo command |
CONFIG_OS_MGMT_RESET_MS |
Delay before executing reset command (ms) |
CONFIG_OS_MGMT_TASKSTAT |
Support for taskstat command |
CONFIG_OT_PLAT_FLASH_PAGES_COUNT |
Flash pages count used by OpenThread platform |
CONFIG_OUTPUT_DISASSEMBLY |
Create a disassembly file |
CONFIG_OUTPUT_PRINT_MEMORY_USAGE |
Print memory usage to stdout |
CONFIG_OUTPUT_STAT |
Create a statistics file |
CONFIG_OVERRIDE_FRAME_POINTER_DEFAULT |
Override compiler defaults for -fomit-frame-pointer |
CONFIG_PCA9633 |
PCA9633 LED driver |
CONFIG_PCA9633_DEV_NAME |
PCA9633 device name |
CONFIG_PCA9633_I2C_ADDRESS |
PCA9633 I2C slave address |
CONFIG_PCA9633_I2C_MASTER_DEV_NAME |
I2C master where PCA9633 is connected |
CONFIG_PCI |
PCI Settings |
CONFIG_PCI_ENUMERATION |
Enable PCI device enumeration |
CONFIG_PCI_LEGACY_BRIDGE |
PCI legacy bridge device support |
CONFIG_PCI_LEGACY_BRIDGE_BUS |
PCI Legacy Bridge Bus number |
CONFIG_PCI_LEGACY_BRIDGE_DEV |
PCI Legacy Bridge Device number |
CONFIG_PCI_LEGACY_BRIDGE_DEVICE_ID |
PCI Legacy Bridge Device ID |
CONFIG_PCI_LEGACY_BRIDGE_VENDOR_ID |
PCI Legacy Bridge Vendor ID |
CONFIG_PCI_LOG_LEVEL |
|
CONFIG_PCI_LOG_LEVEL_DBG |
Debug |
CONFIG_PCI_LOG_LEVEL_ERR |
Error |
CONFIG_PCI_LOG_LEVEL_INF |
Info |
CONFIG_PCI_LOG_LEVEL_OFF |
Off |
CONFIG_PCI_LOG_LEVEL_WRN |
Warning |
CONFIG_PCI_SHELL |
Enable PCI Shell |
CONFIG_PERFORMANCE_METRICS |
Enable performance metrics [EXPERIMENTAL] |
CONFIG_PIC_DISABLE |
Disable PIC |
CONFIG_PINMUX |
Enable board pinmux driver |
CONFIG_PINMUX_BEETLE |
ARM V2M Beetle Pin multiplexer driver |
CONFIG_PINMUX_CC2650 |
Pinmux driver for CC2650 SoC |
CONFIG_PINMUX_ESP32 |
ESP32 Pin multiplexer driver |
CONFIG_PINMUX_GALILEO_EXP0_NAME |
Name of the GPIO expander 0 |
CONFIG_PINMUX_GALILEO_EXP1_NAME |
Name of the GPIO expander 1 |
CONFIG_PINMUX_GALILEO_EXP2_NAME |
Name of the GPIO expander 2 |
CONFIG_PINMUX_GALILEO_GPIO_DW_NAME |
Name of the DesignWare GPIO |
CONFIG_PINMUX_GALILEO_GPIO_INTEL_CW_NAME |
Name of the Legacy Bridge Core Well GPIO |
CONFIG_PINMUX_GALILEO_GPIO_INTEL_RW_NAME |
Name of the Legacy Bridge Resume Well GPIO |
CONFIG_PINMUX_GALILEO_PWM0_NAME |
Name of the PWM LED expander 0 |
CONFIG_PINMUX_INIT_PRIORITY |
Init priority |
CONFIG_PINMUX_INTEL_S1000 |
Intel S1000 I/O multiplexer driver |
CONFIG_PINMUX_MCUX |
MCUX pinmux driver |
CONFIG_PINMUX_MCUX_LPC |
MCUX LPC pinmux driver |
CONFIG_PINMUX_MCUX_LPC_PORT0 |
Port 0 |
CONFIG_PINMUX_MCUX_LPC_PORT0_NAME |
Pinmux Port 0 driver name |
CONFIG_PINMUX_MCUX_LPC_PORT1 |
Port 1 |
CONFIG_PINMUX_MCUX_LPC_PORT1_NAME |
Pinmux Port 1 driver name |
CONFIG_PINMUX_MCUX_PORTA |
Port A |
CONFIG_PINMUX_MCUX_PORTA_NAME |
Pinmux Port A driver name |
CONFIG_PINMUX_MCUX_PORTB |
Port B |
CONFIG_PINMUX_MCUX_PORTB_NAME |
Pinmux Port B driver name |
CONFIG_PINMUX_MCUX_PORTC |
Port C |
CONFIG_PINMUX_MCUX_PORTC_NAME |
Pinmux Port C driver name |
CONFIG_PINMUX_MCUX_PORTD |
Port D |
CONFIG_PINMUX_MCUX_PORTD_NAME |
Pinmux Port D driver name |
CONFIG_PINMUX_MCUX_PORTE |
Port E |
CONFIG_PINMUX_MCUX_PORTE_NAME |
Pinmux Port E driver name |
CONFIG_PINMUX_NAME |
Pinmux driver name |
CONFIG_PINMUX_QMSI |
Enable QMSI pinmux dev driver |
CONFIG_PINMUX_RV32M1 |
RV32M1 pinmux driver |
CONFIG_PINMUX_RV32M1_PORTA |
Port A |
CONFIG_PINMUX_RV32M1_PORTA_NAME |
Pinmux Port A driver name |
CONFIG_PINMUX_RV32M1_PORTB |
Port B |
CONFIG_PINMUX_RV32M1_PORTB_NAME |
Pinmux Port B driver name |
CONFIG_PINMUX_RV32M1_PORTC |
Port C |
CONFIG_PINMUX_RV32M1_PORTC_NAME |
Pinmux Port C driver name |
CONFIG_PINMUX_RV32M1_PORTD |
Port D |
CONFIG_PINMUX_RV32M1_PORTD_NAME |
Pinmux Port D driver name |
CONFIG_PINMUX_RV32M1_PORTE |
Port E |
CONFIG_PINMUX_RV32M1_PORTE_NAME |
Pinmux Port E driver name |
CONFIG_PINMUX_SAM0 |
Atmel SAM0 pin multiplexer driver |
CONFIG_PINMUX_SIFIVE |
SiFive Freedom SOC pinmux driver |
CONFIG_PINMUX_SIFIVE_0_NAME |
SIFIVE pinmux 0 driver name |
CONFIG_PINMUX_STM32 |
Pinmux driver for STM32 MCUs |
CONFIG_PINMUX_STM32_DEVICE_INITIALIZATION_PRIORITY |
Device initialization priority STM32 pinmux |
CONFIG_PLATFORM_SPECIFIC_INIT |
Enable platform (SOC) specific startup hook |
CONFIG_PLIC |
Platform Level Interrupt Controller (PLIC) |
CONFIG_PMS7003 |
PMS7003 particulate matter sensor |
CONFIG_PMS7003_DRIVER_NAME |
Driver name |
CONFIG_PMS7003_UART_DEVICE |
UART device |
CONFIG_POLL |
Async I/O Framework |
CONFIG_POSIX_API |
POSIX APIs |
CONFIG_POSIX_FS |
Enable POSIX file system API support |
CONFIG_POSIX_MAX_FDS |
Maximum number of open file descriptors |
CONFIG_POSIX_MAX_OPEN_FILES |
Maximum number of open file descriptors |
CONFIG_POSIX_MQUEUE |
Enable POSIX message queue |
CONFIG_PREEMPT_ENABLED |
|
CONFIG_PRESERVE_JTAG_IO_PINS |
Kinetis K6x JTAG pin usage |
CONFIG_PRINTK |
Send printk() to console |
CONFIG_PRINTK_BUFFER_SIZE |
printk() buffer size |
CONFIG_PRINTK_HOOK_INIT_PRIORITY |
|
CONFIG_PRIORITY_CEILING |
Priority inheritance ceiling |
CONFIG_PRIVILEGED_STACK_SIZE |
Size of privileged stack |
CONFIG_PRIVILEGED_STACK_TEXT_AREA |
Privileged stacks text area |
CONFIG_PTHREAD_IPC |
POSIX pthread IPC API |
CONFIG_PTP_CLOCK |
Precision Time Protocol Clock driver support |
CONFIG_PTP_CLOCK_MCUX |
MCUX PTP clock driver support |
CONFIG_PTP_CLOCK_SAM_GMAC |
SAM GMAC PTP clock driver support |
CONFIG_PWM |
PWM (Pulse Width Modulation) Drivers |
CONFIG_PWM_0 |
Enable PWM port 0 |
CONFIG_PWM_1 |
Enable PWM port 1 |
CONFIG_PWM_2 |
Enable PWM port 2 |
CONFIG_PWM_3 |
Enable PWM port 3 |
CONFIG_PWM_4 |
Enable PWM port 4 |
CONFIG_PWM_DW |
DesignWare PWM |
CONFIG_PWM_DW_0_DRV_NAME |
DesignWare PWM Device Name |
CONFIG_PWM_IMX |
i.MX PWM Driver |
CONFIG_PWM_LED_ESP32 |
ESP32 PWM LED driver |
CONFIG_PWM_LED_ESP32_DEV_NAME_0 |
ESP32 PWM LED Name |
CONFIG_PWM_LED_ESP32_HS_CH |
Set high speed channels |
CONFIG_PWM_LED_ESP32_HS_CH0 |
Enable channel 0 |
CONFIG_PWM_LED_ESP32_HS_CH0_GPIO |
GPIO number |
CONFIG_PWM_LED_ESP32_HS_CH0_TIMER |
Set timer |
CONFIG_PWM_LED_ESP32_HS_CH1 |
Enable channel 1 |
CONFIG_PWM_LED_ESP32_HS_CH1_GPIO |
GPIO number |
CONFIG_PWM_LED_ESP32_HS_CH1_TIMER |
Set timer |
CONFIG_PWM_LED_ESP32_HS_CH2 |
Enable channel 2 |
CONFIG_PWM_LED_ESP32_HS_CH2_GPIO |
GPIO number |
CONFIG_PWM_LED_ESP32_HS_CH2_TIMER |
Set timer |
CONFIG_PWM_LED_ESP32_HS_CH3 |
Enable channel 3 |
CONFIG_PWM_LED_ESP32_HS_CH3_GPIO |
GPIO number |
CONFIG_PWM_LED_ESP32_HS_CH3_TIMER |
Set timer |
CONFIG_PWM_LED_ESP32_HS_CH4 |
Enable channel 4 |
CONFIG_PWM_LED_ESP32_HS_CH4_GPIO |
GPIO number |
CONFIG_PWM_LED_ESP32_HS_CH4_TIMER |
Set timer |
CONFIG_PWM_LED_ESP32_HS_CH5 |
Enable channel 5 |
CONFIG_PWM_LED_ESP32_HS_CH5_GPIO |
GPIO number |
CONFIG_PWM_LED_ESP32_HS_CH5_TIMER |
Set timer |
CONFIG_PWM_LED_ESP32_HS_CH6 |
Enable channel 6 |
CONFIG_PWM_LED_ESP32_HS_CH6_GPIO |
GPIO number |
CONFIG_PWM_LED_ESP32_HS_CH6_TIMER |
Set timer |
CONFIG_PWM_LED_ESP32_HS_CH7 |
Enable channel 7 |
CONFIG_PWM_LED_ESP32_HS_CH7_GPIO |
GPIO number |
CONFIG_PWM_LED_ESP32_HS_CH7_TIMER |
Set timer |
CONFIG_PWM_LED_ESP32_HS_TIMER |
Set high speed timers |
CONFIG_PWM_LED_ESP32_HS_TIMER0 |
Set timer 0 |
CONFIG_PWM_LED_ESP32_HS_TIMER0_BIT_NUM |
Timer counter precision |
CONFIG_PWM_LED_ESP32_HS_TIMER0_FREQ |
Set frequency |
CONFIG_PWM_LED_ESP32_HS_TIMER1 |
Set timer 1 |
CONFIG_PWM_LED_ESP32_HS_TIMER1_BIT_NUM |
Timer counter precision |
CONFIG_PWM_LED_ESP32_HS_TIMER1_FREQ |
Set frequency |
CONFIG_PWM_LED_ESP32_HS_TIMER2 |
Set timer 2 |
CONFIG_PWM_LED_ESP32_HS_TIMER2_BIT_NUM |
Timer counter precision |
CONFIG_PWM_LED_ESP32_HS_TIMER2_FREQ |
Set frequency |
CONFIG_PWM_LED_ESP32_HS_TIMER3 |
Set timer 3 |
CONFIG_PWM_LED_ESP32_HS_TIMER3_BIT_NUM |
Timer counter precision |
CONFIG_PWM_LED_ESP32_HS_TIMER3_FREQ |
Set frequency |
CONFIG_PWM_LED_ESP32_LS_CH |
Set low speed channels |
CONFIG_PWM_LED_ESP32_LS_CH0 |
Enable channel 0 |
CONFIG_PWM_LED_ESP32_LS_CH0_GPIO |
GPIO number |
CONFIG_PWM_LED_ESP32_LS_CH0_TIMER |
Set timer |
CONFIG_PWM_LED_ESP32_LS_CH1 |
Enable channel 1 |
CONFIG_PWM_LED_ESP32_LS_CH1_GPIO |
GPIO number |
CONFIG_PWM_LED_ESP32_LS_CH1_TIMER |
Set timer |
CONFIG_PWM_LED_ESP32_LS_CH2 |
Enable channel 2 |
CONFIG_PWM_LED_ESP32_LS_CH2_GPIO |
GPIO number |
CONFIG_PWM_LED_ESP32_LS_CH2_TIMER |
Set timer |
CONFIG_PWM_LED_ESP32_LS_CH3 |
Enable channel 3 |
CONFIG_PWM_LED_ESP32_LS_CH3_GPIO |
GPIO number |
CONFIG_PWM_LED_ESP32_LS_CH3_TIMER |
Set timer |
CONFIG_PWM_LED_ESP32_LS_CH4 |
Enable channel 4 |
CONFIG_PWM_LED_ESP32_LS_CH4_GPIO |
GPIO number |
CONFIG_PWM_LED_ESP32_LS_CH4_TIMER |
Set timer |
CONFIG_PWM_LED_ESP32_LS_CH5 |
Enable channel 5 |
CONFIG_PWM_LED_ESP32_LS_CH5_GPIO |
GPIO number |
CONFIG_PWM_LED_ESP32_LS_CH5_TIMER |
Set timer |
CONFIG_PWM_LED_ESP32_LS_CH6 |
Enable channel 6 |
CONFIG_PWM_LED_ESP32_LS_CH6_GPIO |
GPIO number |
CONFIG_PWM_LED_ESP32_LS_CH6_TIMER |
Set timer |
CONFIG_PWM_LED_ESP32_LS_CH7 |
Enable channel 7 |
CONFIG_PWM_LED_ESP32_LS_CH7_GPIO |
GPIO number |
CONFIG_PWM_LED_ESP32_LS_CH7_TIMER |
Set timer |
CONFIG_PWM_LED_ESP32_LS_TIMER |
Set low speed timers |
CONFIG_PWM_LED_ESP32_LS_TIMER0 |
Set timer 0 |
CONFIG_PWM_LED_ESP32_LS_TIMER0_BIT_NUM |
Timer counter precision |
CONFIG_PWM_LED_ESP32_LS_TIMER0_FREQ |
Set frequency |
CONFIG_PWM_LED_ESP32_LS_TIMER1 |
Set timer 1 |
CONFIG_PWM_LED_ESP32_LS_TIMER1_BIT_NUM |
Timer counter precision |
CONFIG_PWM_LED_ESP32_LS_TIMER1_FREQ |
Set frequency |
CONFIG_PWM_LED_ESP32_LS_TIMER2 |
Set timer 2 |
CONFIG_PWM_LED_ESP32_LS_TIMER2_BIT_NUM |
Timer counter precision |
CONFIG_PWM_LED_ESP32_LS_TIMER2_FREQ |
Set frequency |
CONFIG_PWM_LED_ESP32_LS_TIMER3 |
Set timer 3 |
CONFIG_PWM_LED_ESP32_LS_TIMER3_BIT_NUM |
Timer counter precision |
CONFIG_PWM_LED_ESP32_LS_TIMER3_FREQ |
Set frequency |
CONFIG_PWM_LOG_LEVEL |
|
CONFIG_PWM_LOG_LEVEL_DBG |
Debug |
CONFIG_PWM_LOG_LEVEL_ERR |
Error |
CONFIG_PWM_LOG_LEVEL_INF |
Info |
CONFIG_PWM_LOG_LEVEL_OFF |
Off |
CONFIG_PWM_LOG_LEVEL_WRN |
Warning |
CONFIG_PWM_MCUX_FTM |
MCUX FTM PWM driver |
CONFIG_PWM_NRF5_SW |
Nordic Semiconductor nRF5x series S/W PWM |
CONFIG_PWM_NRF5_SW_0_DEV_NAME |
Nordic Semiconductor nRF5x series S/W PWM Device Name |
CONFIG_PWM_NRFX |
nRF PWM nrfx driver |
CONFIG_PWM_PCA9685 |
PCA9685 I2C-based PWM chip |
CONFIG_PWM_PCA9685_0 |
PCA9685 PWM chip #0 |
CONFIG_PWM_PCA9685_0_DEV_NAME |
PCA9685 PWM chip #0 Device Name |
CONFIG_PWM_PCA9685_0_I2C_ADDR |
PCA9685 PWM chip #0 I2C slave address |
CONFIG_PWM_PCA9685_0_I2C_MASTER_DEV_NAME |
I2C Master where PCA9685 PWM chip #0 is connected |
CONFIG_PWM_PCA9685_INIT_PRIORITY |
Init priority |
CONFIG_PWM_PWMSWR_LOOP |
Loop count for PWM Software Reset |
CONFIG_PWM_QMSI |
QMSI PWM Driver |
CONFIG_PWM_QMSI_API_REENTRANCY |
PWM shim driver API reentrancy |
CONFIG_PWM_QMSI_DEV_NAME |
QMSI PWM Device Name |
CONFIG_PWM_QMSI_NUM_PORTS |
Number of PWM ports for PWM |
CONFIG_PWM_SAM |
Atmel SAM MCU Family PWM Driver |
CONFIG_PWM_SIFIVE |
SiFive Freedom PWM driver |
CONFIG_PWM_SIFIVE_INIT_PRIORITY |
Init Priority |
CONFIG_PWM_STM32 |
STM32 MCU PWM driver |
CONFIG_PWM_STM32_1 |
STM32 PWM 1 Output |
CONFIG_PWM_STM32_10 |
STM32 PWM 10 Output |
CONFIG_PWM_STM32_11 |
STM32 PWM 11 Output |
CONFIG_PWM_STM32_12 |
STM32 PWM 12 Output |
CONFIG_PWM_STM32_13 |
STM32 PWM 13 Output |
CONFIG_PWM_STM32_14 |
STM32 PWM 14 Output |
CONFIG_PWM_STM32_15 |
STM32 PWM 15 Output |
CONFIG_PWM_STM32_16 |
STM32 PWM 16 Output |
CONFIG_PWM_STM32_17 |
STM32 PWM 17 Output |
CONFIG_PWM_STM32_18 |
STM32 PWM 18 Output |
CONFIG_PWM_STM32_19 |
STM32 PWM 19 Output |
CONFIG_PWM_STM32_2 |
STM32 PWM 2 Output |
CONFIG_PWM_STM32_20 |
STM32 PWM 20 Output |
CONFIG_PWM_STM32_3 |
STM32 PWM 3 Output |
CONFIG_PWM_STM32_4 |
STM32 PWM 4 Output |
CONFIG_PWM_STM32_5 |
STM32 PWM 5 Output |
CONFIG_PWM_STM32_6 |
STM32 PWM 6 Output |
CONFIG_PWM_STM32_7 |
STM32 PWM 7 Output |
CONFIG_PWM_STM32_8 |
STM32 PWM 8 Output |
CONFIG_PWM_STM32_9 |
STM32 PWM 9 Output |
CONFIG_QDEC_NRFX |
Nordic QDEC nrfx driver |
CONFIG_QEMU_TARGET |
|
CONFIG_QEMU_TICKLESS_WORKAROUND |
Disable tickless on qemu due to asynchrony bug |
CONFIG_QMSI |
QMSI driver support |
CONFIG_QUARK_SE_IPM_CONSOLE_RING_BUF_SIZE32 |
IPM Console Ring Buffer Size |
CONFIG_QUARK_SE_IPM_IRQ_PRI |
IPM interrupt priority |
CONFIG_QUARK_SE_SS_IPM_IRQ_PRI |
IPM interrupt priority |
CONFIG_RAM_CONSOLE |
Use RAM console |
CONFIG_RAM_CONSOLE_BUFFER_SIZE |
Ram Console buffer size |
CONFIG_REALMODE |
boot from x86 real mode |
CONFIG_REBOOT |
Reboot functionality |
CONFIG_REBOOT_RST_CNT |
Reboot via RST_CNT register |
CONFIG_RGF_NUM_BANKS |
Number of General Purpose Register Banks |
CONFIG_RING_BUFFER |
Enable ring buffers |
CONFIG_RISCV32 |
RISCV32 architecture |
CONFIG_RISCV32_RV32M1_RAM_BASE_ADDR |
|
CONFIG_RISCV32_RV32M1_RAM_SIZE |
|
CONFIG_RISCV32_RV32M1_ROM_BASE_ADDR |
|
CONFIG_RISCV32_RV32M1_ROM_SIZE |
|
CONFIG_RISCV32_RV32M1_VECTOR_BASE_ADDR |
|
CONFIG_RISCV32_RV32M1_VECTOR_SIZE |
|
CONFIG_RISCV_GENERIC_TOOLCHAIN |
Compile using generic riscv32 toolchain |
CONFIG_RISCV_HAS_CPU_IDLE |
Does SOC has CPU IDLE instruction |
CONFIG_RISCV_HAS_PLIC |
Does the SOC provide support for a Platform Level Interrupt Controller |
CONFIG_RISCV_MACHINE_TIMER |
RISCV Machine Timer |
CONFIG_RISCV_RAM_BASE_ADDR |
|
CONFIG_RISCV_RAM_SIZE |
|
CONFIG_RISCV_ROM_BASE_ADDR |
|
CONFIG_RISCV_ROM_SIZE |
|
CONFIG_RISCV_SOC_CONTEXT_SAVE |
Enable SOC-based context saving in IRQ handlers |
CONFIG_RISCV_SOC_INTERRUPT_INIT |
Enable SOC-based interrupt initialization |
CONFIG_RNDIS_BULK_EP_MPS |
|
CONFIG_RNDIS_INTERRUPT_EP_MPS |
|
CONFIG_RTC |
Real-Time Clock |
CONFIG_RTC_0_IRQ_PRI |
|
CONFIG_RTC_0_NAME |
Driver instance name |
CONFIG_RTC_LOG_LEVEL |
|
CONFIG_RTC_LOG_LEVEL_DBG |
Debug |
CONFIG_RTC_LOG_LEVEL_ERR |
Error |
CONFIG_RTC_LOG_LEVEL_INF |
Info |
CONFIG_RTC_LOG_LEVEL_OFF |
Off |
CONFIG_RTC_LOG_LEVEL_WRN |
Warning |
CONFIG_RTC_MCUX |
MCUX RTC driver |
CONFIG_RTC_PRESCALER |
Prescaler size |
CONFIG_RTC_QMSI |
QMSI RTC Driver |
CONFIG_RTC_QMSI_API_REENTRANCY |
RTC shim driver API reentrancy |
CONFIG_RTC_STM32 |
STM32 RTC Driver |
CONFIG_RTC_STM32_CLOCK_LSE |
LSE |
CONFIG_RTC_STM32_CLOCK_LSI |
LSI |
CONFIG_RTC_STM32_LSE_DRIVE_HIGH |
High |
CONFIG_RTC_STM32_LSE_DRIVE_LOW |
Low |
CONFIG_RTC_STM32_LSE_DRIVE_MEDIUMHIGH |
Medium High |
CONFIG_RTC_STM32_LSE_DRIVE_MEDIUMLOW |
Medium Low |
CONFIG_RTC_STM32_LSE_DRIVE_STRENGTH |
|
CONFIG_RTTI |
Enable C++ RTTI support |
CONFIG_RTT_CONSOLE |
Use RTT console |
CONFIG_RTT_TX_RETRY_CNT |
Number of TX retries |
CONFIG_RTT_TX_RETRY_DELAY_MS |
Delay between TX retries in milliseconds |
CONFIG_RTT_TX_RETRY_IN_INTERRUPT |
Busy wait in the interrupt context for TX retry |
CONFIG_RUNTIME_NMI |
Attach an NMI handler at runtime |
CONFIG_RV32M1_INTMUX |
OpenISA RV32M1 INTMUX interrupt controller support |
CONFIG_RV32M1_INTMUX_CHANNEL_0 |
INTMUX channel 0 |
CONFIG_RV32M1_INTMUX_CHANNEL_1 |
INTMUX channel 1 |
CONFIG_RV32M1_INTMUX_CHANNEL_2 |
INTMUX channel 2 |
CONFIG_RV32M1_INTMUX_CHANNEL_3 |
INTMUX channel 3 |
CONFIG_RV32M1_INTMUX_CHANNEL_4 |
INTMUX channel 4 |
CONFIG_RV32M1_INTMUX_CHANNEL_5 |
INTMUX channel 5 |
CONFIG_RV32M1_INTMUX_CHANNEL_6 |
INTMUX channel 6 |
CONFIG_RV32M1_INTMUX_CHANNEL_7 |
INTMUX channel 7 |
CONFIG_RV32M1_INTMUX_INIT_PRIORITY |
INTMUX driver initialization priority |
CONFIG_RV32M1_LPTMR_TIMER |
RV32M1 LPTMR system timer driver |
CONFIG_SAM0_RTC_TIMER |
Atmel SAM0 series RTC timer |
CONFIG_SBL_FIXUP |
SBL specific fixup required |
CONFIG_SCHED_CPU_MASK |
Enable CPU mask affinity/pinning API |
CONFIG_SCHED_DEADLINE |
Enable earliest-deadline-first scheduling |
CONFIG_SCHED_DUMB |
Simple linked-list ready queue |
CONFIG_SCHED_IPI_SUPPORTED |
Architecture supports broadcast interprocessor interrupts |
CONFIG_SCHED_MULTIQ |
Traditional multi-queue ready queue |
CONFIG_SCHED_SCALABLE |
Red/black tree ready queue |
CONFIG_SDL_DISPLAY |
SDL based emulated display |
CONFIG_SDL_DISPLAY_DEV_NAME |
SDL display device name |
CONFIG_SDL_DISPLAY_X_RES |
X resolution for SDL display |
CONFIG_SDL_DISPLAY_Y_RES |
Y resolution for SDL display |
CONFIG_SEGGER_RTT_BUFFER_SIZE_DOWN |
Size of the buffer for terminal input of target, from host |
CONFIG_SEGGER_RTT_BUFFER_SIZE_UP |
Size of the buffer for terminal output of target, up to host |
CONFIG_SEGGER_RTT_MAX_NUM_DOWN_BUFFERS |
Maximum number of down-buffers |
CONFIG_SEGGER_RTT_MAX_NUM_UP_BUFFERS |
Maximum number of up-buffers |
CONFIG_SEGGER_RTT_MEMCPY_USE_BYTELOOP |
Use a simple byte-loop instead of standard memcpy |
CONFIG_SEGGER_RTT_MODE |
|
CONFIG_SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL |
Block: Wait until there is space in the buffer. |
CONFIG_SEGGER_RTT_MODE_NO_BLOCK_SKIP |
Skip. Do not block, output nothing. |
CONFIG_SEGGER_RTT_MODE_NO_BLOCK_TRIM |
Trim: Do not block, output as much as fits. |
CONFIG_SEGGER_RTT_PRINTF_BUFFER_SIZE |
Size of buffer for RTT printf to bulk-send chars via RTT |
CONFIG_SEGGER_SYSTEMVIEW |
Segger SystemView support |
CONFIG_SEGGER_SYSTEMVIEW_BOOT_ENABLE |
Start logging SystemView events on system start |
CONFIG_SEGGER_SYSVIEW_RTT_BUFFER_SIZE |
Buffer size for SystemView RTT |
CONFIG_SEM_VALUE_MAX |
Maximum semaphore limit |
CONFIG_SENSOR |
Sensor Drivers |
CONFIG_SENSOR_INIT_PRIORITY |
Sensor init priority |
CONFIG_SENSOR_LOG_LEVEL |
|
CONFIG_SENSOR_LOG_LEVEL_DBG |
Debug |
CONFIG_SENSOR_LOG_LEVEL_ERR |
Error |
CONFIG_SENSOR_LOG_LEVEL_INF |
Info |
CONFIG_SENSOR_LOG_LEVEL_OFF |
Off |
CONFIG_SENSOR_LOG_LEVEL_WRN |
Warning |
CONFIG_SERIAL |
Serial Drivers |
CONFIG_SERIAL_HAS_DRIVER |
|
CONFIG_SERIAL_SUPPORT_INTERRUPT |
|
CONFIG_SETTINGS |
Enable settings subsystem with non-volatile storage |
CONFIG_SETTINGS_ENCODE_LEN |
|
CONFIG_SETTINGS_FCB |
FCB |
CONFIG_SETTINGS_FCB_MAGIC |
FCB magic for the settings subsystem |
CONFIG_SETTINGS_FCB_NUM_AREAS |
Number of flash areas used by the settings subsystem |
CONFIG_SETTINGS_FS |
File System |
CONFIG_SETTINGS_FS_DIR |
Serialization directory |
CONFIG_SETTINGS_FS_FILE |
Default settings file |
CONFIG_SETTINGS_FS_MAX_LINES |
Compression threshold |
CONFIG_SETTINGS_LOG_LEVEL |
|
CONFIG_SETTINGS_LOG_LEVEL_DBG |
Debug |
CONFIG_SETTINGS_LOG_LEVEL_ERR |
Error |
CONFIG_SETTINGS_LOG_LEVEL_INF |
Info |
CONFIG_SETTINGS_LOG_LEVEL_OFF |
Off |
CONFIG_SETTINGS_LOG_LEVEL_WRN |
Warning |
CONFIG_SETTINGS_USE_BASE64 |
encoding value using base64 |
CONFIG_SET_GDT |
Setup GDT as part of boot process |
CONFIG_SHARED_GDT_RAM_ADDR |
Address of the shared RAM with the QMSI Bootloader / Address of the GDT in RAM shared with the QMSI Bootloader |
CONFIG_SHARED_GDT_RAM_SIZE |
Size of the shared RAM with the QMSI Bootloader / Size of the GDT in RAM shared with the QMSI Bootloader |
CONFIG_SHARED_IRQ |
Shared interrupt driver |
CONFIG_SHARED_IRQ_0 |
Shared interrupt instance 0 |
CONFIG_SHARED_IRQ_1 |
Shared interrupt instance 1 |
CONFIG_SHARED_IRQ_INIT_PRIORITY |
Shared IRQ init priority |
CONFIG_SHARED_IRQ_NUM_CLIENTS |
The number of clients per instance |
CONFIG_SHELL |
Enable shell |
CONFIG_SHELL_ARGC_MAX |
Maximum arguments in shell command |
CONFIG_SHELL_BACKENDS |
Enable shell backends |
CONFIG_SHELL_BACKEND_DUMMY |
Enable dummy backend. |
CONFIG_SHELL_BACKEND_RTT |
Enable RTT backend. |
CONFIG_SHELL_BACKEND_RTT_LOG_MESSAGE_QUEUE_SIZE |
Log message queue size |
CONFIG_SHELL_BACKEND_RTT_LOG_MESSAGE_QUEUE_TIMEOUT |
Log message drop timeout (in milliseconds) |
CONFIG_SHELL_BACKEND_SERIAL |
Enable serial backends. |
CONFIG_SHELL_BACKEND_SERIAL_INTERRUPT_DRIVEN |
Interrupt driven |
CONFIG_SHELL_BACKEND_SERIAL_LOG_LEVEL |
|
CONFIG_SHELL_BACKEND_SERIAL_LOG_LEVEL_DBG |
Debug |
CONFIG_SHELL_BACKEND_SERIAL_LOG_LEVEL_DEFAULT |
System limit (LOG_MAX_LEVEL) |
CONFIG_SHELL_BACKEND_SERIAL_LOG_LEVEL_ERR |
Error |
CONFIG_SHELL_BACKEND_SERIAL_LOG_LEVEL_INF |
Info |
CONFIG_SHELL_BACKEND_SERIAL_LOG_LEVEL_NONE |
None |
CONFIG_SHELL_BACKEND_SERIAL_LOG_LEVEL_WRN |
Warning |
CONFIG_SHELL_BACKEND_SERIAL_LOG_MESSAGE_QUEUE_SIZE |
Log message queue size |
CONFIG_SHELL_BACKEND_SERIAL_LOG_MESSAGE_QUEUE_TIMEOUT |
Log message drop timeout (in milliseconds) |
CONFIG_SHELL_BACKEND_SERIAL_RX_POLL_PERIOD |
RX polling period (in milliseconds) |
CONFIG_SHELL_BACKEND_SERIAL_RX_RING_BUFFER_SIZE |
Set RX ring buffer size |
CONFIG_SHELL_BACKEND_SERIAL_TX_RING_BUFFER_SIZE |
Set TX ring buffer size |
CONFIG_SHELL_BACKEND_TELNET |
Enable TELNET backend. |
CONFIG_SHELL_BACKSPACE_MODE_DELETE |
Default escape code for backspace is DELETE (0x7F) |
CONFIG_SHELL_CMDS |
Enable built-in commands |
CONFIG_SHELL_CMDS_RESIZE |
Enable resize command |
CONFIG_SHELL_CMD_BUFF_SIZE |
Shell command buffer size |
CONFIG_SHELL_ECHO_STATUS |
Enable echo on shell |
CONFIG_SHELL_HELP |
Enable help message |
CONFIG_SHELL_HELP_ON_WRONG_ARGUMENT_COUNT |
Enable printing help on wrong argument count |
CONFIG_SHELL_HISTORY |
Enable history in shell |
CONFIG_SHELL_HISTORY_BUFFER |
History buffer in bytes |
CONFIG_SHELL_LOG_BACKEND |
|
CONFIG_SHELL_LOG_LEVEL |
|
CONFIG_SHELL_LOG_LEVEL_DBG |
Debug |
CONFIG_SHELL_LOG_LEVEL_ERR |
Error |
CONFIG_SHELL_LOG_LEVEL_INF |
Info |
CONFIG_SHELL_LOG_LEVEL_OFF |
Off |
CONFIG_SHELL_LOG_LEVEL_WRN |
Warning |
CONFIG_SHELL_MAX_LOG_MSG_BUFFERED |
Maximal number of log messages in FIFO |
CONFIG_SHELL_METAKEYS |
Enable metakeys |
CONFIG_SHELL_PRINTF_BUFF_SIZE |
Shell print buffer size |
CONFIG_SHELL_RTT_INIT_LOG_LEVEL |
|
CONFIG_SHELL_RTT_INIT_LOG_LEVEL_DBG |
Debug |
CONFIG_SHELL_RTT_INIT_LOG_LEVEL_DEFAULT |
System limit (LOG_MAX_LEVEL) |
CONFIG_SHELL_RTT_INIT_LOG_LEVEL_ERR |
Error |
CONFIG_SHELL_RTT_INIT_LOG_LEVEL_INF |
Info |
CONFIG_SHELL_RTT_INIT_LOG_LEVEL_NONE |
None |
CONFIG_SHELL_RTT_INIT_LOG_LEVEL_WRN |
Warning |
CONFIG_SHELL_RTT_LOG_LEVEL |
|
CONFIG_SHELL_RTT_LOG_LEVEL_DBG |
Debug |
CONFIG_SHELL_RTT_LOG_LEVEL_ERR |
Error |
CONFIG_SHELL_RTT_LOG_LEVEL_INF |
Info |
CONFIG_SHELL_RTT_LOG_LEVEL_OFF |
Off |
CONFIG_SHELL_RTT_LOG_LEVEL_WRN |
Warning |
CONFIG_SHELL_RTT_RX_POLL_PERIOD |
RX polling period (in milliseconds) |
CONFIG_SHELL_STACK_SIZE |
Shell thread stack size |
CONFIG_SHELL_STATS |
Enable shell statistics |
CONFIG_SHELL_TELNET_INIT_LOG_LEVEL |
|
CONFIG_SHELL_TELNET_INIT_LOG_LEVEL_DBG |
Debug |
CONFIG_SHELL_TELNET_INIT_LOG_LEVEL_DEFAULT |
System limit (LOG_MAX_LEVEL) |
CONFIG_SHELL_TELNET_INIT_LOG_LEVEL_ERR |
Error |
CONFIG_SHELL_TELNET_INIT_LOG_LEVEL_INF |
Info |
CONFIG_SHELL_TELNET_INIT_LOG_LEVEL_NONE |
None |
CONFIG_SHELL_TELNET_INIT_LOG_LEVEL_WRN |
Warning |
CONFIG_SHELL_TELNET_LINE_BUF_SIZE |
Telnet line buffer size |
CONFIG_SHELL_TELNET_LOG_LEVEL |
|
CONFIG_SHELL_TELNET_LOG_LEVEL_DBG |
Debug |
CONFIG_SHELL_TELNET_LOG_LEVEL_ERR |
Error |
CONFIG_SHELL_TELNET_LOG_LEVEL_INF |
Info |
CONFIG_SHELL_TELNET_LOG_LEVEL_OFF |
Off |
CONFIG_SHELL_TELNET_LOG_LEVEL_WRN |
Warning |
CONFIG_SHELL_TELNET_LOG_MESSAGE_QUEUE_SIZE |
Log message queue size |
CONFIG_SHELL_TELNET_LOG_MESSAGE_QUEUE_TIMEOUT |
Log message drop timeout (in milliseconds) |
CONFIG_SHELL_TELNET_PORT |
Telnet port number |
CONFIG_SHELL_TELNET_SEND_TIMEOUT |
Telnet line send timeout |
CONFIG_SHELL_TELNET_SUPPORT_COMMAND |
Add support for telnet commands (IAC) [Experimental] |
CONFIG_SHELL_VT100_COLORS |
Enable colors in shell |
CONFIG_SHELL_WILDCARD |
Enable wildcard support in shell |
CONFIG_SHT3XD |
SHT3xD Temperature and Humidity Sensor |
CONFIG_SHT3XD_MPS_05 |
0.5 |
CONFIG_SHT3XD_MPS_1 |
1 |
CONFIG_SHT3XD_MPS_10 |
10 |
CONFIG_SHT3XD_MPS_2 |
2 |
CONFIG_SHT3XD_MPS_4 |
4 |
CONFIG_SHT3XD_REPEATABILITY_HIGH |
high |
CONFIG_SHT3XD_REPEATABILITY_LOW |
low |
CONFIG_SHT3XD_REPEATABILITY_MEDIUM |
medium |
CONFIG_SHT3XD_THREAD_PRIORITY |
Thread priority |
CONFIG_SHT3XD_THREAD_STACK_SIZE |
Thread stack size |
CONFIG_SHT3XD_TRIGGER |
|
CONFIG_SHT3XD_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_SHT3XD_TRIGGER_NONE |
No trigger |
CONFIG_SHT3XD_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_SIFIVE_SPI_0_ROM |
SPI 0 is used to access SPI Flash ROM |
CONFIG_SIMPLELINK_HOST_DRIVER |
Build the SimpleLink WiFi Host Driver |
CONFIG_SIMPLE_FATAL_ERROR_HANDLER |
Simple system fatal error handler |
CONFIG_SIMULATOR_XTENSA |
Simulator Configuration |
CONFIG_SIZE_OPTIMIZATIONS |
Optimize for size |
CONFIG_SLAVE_BOOT_ADDRESS_MCUX |
Address the slave core will boot at |
CONFIG_SLAVE_CORE_MCUX |
Enable LPC54114 Cortex-M0 slave core |
CONFIG_SLAVE_IMAGE_MCUX |
Binary image of slave core’s code |
CONFIG_SLIP |
SLIP driver |
CONFIG_SLIP_DRV_NAME |
SLIP Driver name |
CONFIG_SLIP_LOG_LEVEL |
|
CONFIG_SLIP_LOG_LEVEL_DBG |
Debug |
CONFIG_SLIP_LOG_LEVEL_DEFAULT |
Default |
CONFIG_SLIP_LOG_LEVEL_ERR |
Error |
CONFIG_SLIP_LOG_LEVEL_INF |
Info |
CONFIG_SLIP_LOG_LEVEL_OFF |
Off |
CONFIG_SLIP_LOG_LEVEL_WRN |
Warning |
CONFIG_SLIP_MAC_ADDR |
MAC address for the interface |
CONFIG_SLIP_MTU |
SLIP MTU |
CONFIG_SLIP_STATISTICS |
SLIP network connection statistics |
CONFIG_SLIP_TAP |
Use TAP interface to host |
CONFIG_SMP |
Enable symmetric multithreading support |
CONFIG_SNTP |
SNTP |
CONFIG_SNTP_LOG_LEVEL |
|
CONFIG_SNTP_LOG_LEVEL_DBG |
Debug |
CONFIG_SNTP_LOG_LEVEL_DEFAULT |
Default |
CONFIG_SNTP_LOG_LEVEL_ERR |
Error |
CONFIG_SNTP_LOG_LEVEL_INF |
Info |
CONFIG_SNTP_LOG_LEVEL_OFF |
Off |
CONFIG_SNTP_LOG_LEVEL_WRN |
Warning |
CONFIG_SOC |
|
CONFIG_SOCKS |
SOCKS5 proxy |
CONFIG_SOCKS_LOG_LEVEL |
|
CONFIG_SOCKS_LOG_LEVEL_DBG |
Debug |
CONFIG_SOCKS_LOG_LEVEL_DEFAULT |
Default |
CONFIG_SOCKS_LOG_LEVEL_ERR |
Error |
CONFIG_SOCKS_LOG_LEVEL_INF |
Info |
CONFIG_SOCKS_LOG_LEVEL_OFF |
Off |
CONFIG_SOCKS_LOG_LEVEL_WRN |
Warning |
CONFIG_SOC_APOLLO_LAKE |
Intel Apollo Lake Soc |
CONFIG_SOC_ARC_IOT |
Synopsys ARC IoT SoC |
CONFIG_SOC_ATMEL_SAM3X_EXT_MAINCK |
Atmel SAM3 to use external crystal oscillator for main clock |
CONFIG_SOC_ATMEL_SAM3X_EXT_SLCK |
Atmel SAM3 to use external crystal oscillator for slow clock |
CONFIG_SOC_ATMEL_SAM3X_PLLA_DIVA |
|
CONFIG_SOC_ATMEL_SAM3X_PLLA_MULA |
|
CONFIG_SOC_ATMEL_SAM3X_WAIT_MODE |
Atmel SAM3 goes to Wait mode instead of Sleep mode |
CONFIG_SOC_ATMEL_SAM4S_EXT_MAINCK |
Atmel SAM4S to use external crystal oscillator for main clock |
CONFIG_SOC_ATMEL_SAM4S_EXT_SLCK |
Atmel SAM4S to use external crystal oscillator for slow clock |
CONFIG_SOC_ATMEL_SAM4S_PLLA_DIVA |
PLL DIVA |
CONFIG_SOC_ATMEL_SAM4S_PLLA_MULA |
PLL MULA |
CONFIG_SOC_ATMEL_SAM4S_WAIT_MODE |
Atmel SAM4S goes to Wait mode instead of Sleep mode |
CONFIG_SOC_ATMEL_SAMD_OSC8M_AS_MAIN |
OSC8M |
CONFIG_SOC_ATMEL_SAMD_XOSC |
Enable the external crystal oscillator |
CONFIG_SOC_ATMEL_SAMD_XOSC32K |
Enable the external 32 kHz crystal oscillator |
CONFIG_SOC_ATMEL_SAMD_XOSC32K_AS_MAIN |
XOSC32K |
CONFIG_SOC_ATMEL_SAMD_XOSC_AS_MAIN |
XOSC |
CONFIG_SOC_ATMEL_SAME70_DISABLE_ERASE_PIN |
Disable ERASE pin |
CONFIG_SOC_ATMEL_SAME70_EXT_MAINCK |
Use external crystal oscillator for main clock |
CONFIG_SOC_ATMEL_SAME70_EXT_SLCK |
Use external crystal oscillator for slow clock |
CONFIG_SOC_ATMEL_SAME70_MDIV |
MDIV |
CONFIG_SOC_ATMEL_SAME70_PLLA_DIVA |
PLL DIVA |
CONFIG_SOC_ATMEL_SAME70_PLLA_MULA |
PLL MULA |
CONFIG_SOC_ATMEL_SAME70_WAIT_MODE |
Go to Wait mode instead of Sleep mode |
CONFIG_SOC_ATOM |
Intel ATOM SoC |
CONFIG_SOC_BEETLE_R0 |
ARM BEETLE R0 |
CONFIG_SOC_CC2650 |
CC2650 |
CONFIG_SOC_CC3220SF |
CC3220SF |
CONFIG_SOC_COMPATIBLE_NRF |
|
CONFIG_SOC_COMPATIBLE_NRF52832 |
|
CONFIG_SOC_COMPATIBLE_NRF52X |
|
CONFIG_SOC_DCDC_NRF52X |
|
CONFIG_SOC_D_108MINI |
D_108mini core |
CONFIG_SOC_D_212GP |
D_212GP core |
CONFIG_SOC_D_233L |
D_233L core |
CONFIG_SOC_EMSK |
Synopsys ARC EM Starter Kit SoC |
CONFIG_SOC_EMSK_EM11D |
Synopsys ARC EM11D of EMSK |
CONFIG_SOC_EMSK_EM7D |
Synopsys ARC EM7D of EMSK |
CONFIG_SOC_EMSK_EM9D |
Synopsys ARC EM9D of EMSK |
CONFIG_SOC_ESP32 |
ESP32 |
CONFIG_SOC_FAMILY |
|
CONFIG_SOC_FAMILY_ARM |
|
CONFIG_SOC_FAMILY_EXX32 |
|
CONFIG_SOC_FAMILY_IMX |
|
CONFIG_SOC_FAMILY_KINETIS |
|
CONFIG_SOC_FAMILY_LPC |
|
CONFIG_SOC_FAMILY_MEC |
|
CONFIG_SOC_FAMILY_NRF |
|
CONFIG_SOC_FAMILY_PSOC6 |
|
CONFIG_SOC_FAMILY_QUARK |
|
CONFIG_SOC_FAMILY_RISCV_PRIVILEGE |
|
CONFIG_SOC_FAMILY_SAM |
|
CONFIG_SOC_FAMILY_SAM0 |
|
CONFIG_SOC_FAMILY_STM32 |
|
CONFIG_SOC_FAMILY_TISIMPLELINK |
|
CONFIG_SOC_FLASH_GECKO |
Silicon Labs Gecko flash driver |
CONFIG_SOC_FLASH_MCUX |
MCUX flash shim driver |
CONFIG_SOC_FLASH_NIOS2_QSPI |
Nios-II QSPI flash driver |
CONFIG_SOC_FLASH_NIOS2_QSPI_DEV_NAME |
Nios-II QSPI flash device name |
CONFIG_SOC_FLASH_NRF |
Nordic Semiconductor nRF flash driver |
CONFIG_SOC_FLASH_NRF_RADIO_SYNC |
Nordic nRFx flash driver synchronized with radio |
CONFIG_SOC_FLASH_NRF_UICR |
Access to UICR |
CONFIG_SOC_FLASH_QMSI |
QMSI flash driver |
CONFIG_SOC_FLASH_QMSI_API_REENTRANCY |
flash driver API reentrancy for QMSI shim driver |
CONFIG_SOC_FLASH_QMSI_CLK_COUNT_US |
System clk count per microsecond |
CONFIG_SOC_FLASH_QMSI_DEV_NAME |
QMSI flash device name |
CONFIG_SOC_FLASH_QMSI_SYS_SIZE |
SOC system flash size |
CONFIG_SOC_FLASH_QMSI_WAIT_STATES |
The number of flash wait states |
CONFIG_SOC_FLASH_SAM |
Atmel SAM flash driver |
CONFIG_SOC_FLASH_SAM0 |
Atmel SAM0 flash driver |
CONFIG_SOC_FLASH_SAM0_EMULATE_BYTE_PAGES |
Emulate byte-sized pages |
CONFIG_SOC_FLASH_STM32 |
STM32 flash driver |
CONFIG_SOC_GECKO_CMU |
|
CONFIG_SOC_GECKO_CORE |
|
CONFIG_SOC_GECKO_CRYOTIMER |
|
CONFIG_SOC_GECKO_EMU |
|
CONFIG_SOC_GECKO_EMU_DCDC |
Enable SoC DC/DC regulator |
CONFIG_SOC_GECKO_EMU_DCDC_MODE_BYPASS |
Bypass |
CONFIG_SOC_GECKO_EMU_DCDC_MODE_OFF |
DC/DC Off |
CONFIG_SOC_GECKO_EMU_DCDC_MODE_ON |
DC/DC On |
CONFIG_SOC_GECKO_EMU_DCDC_MODE_UNCONFIGURED |
Initial / Unconfigured |
CONFIG_SOC_GECKO_GPIO |
|
CONFIG_SOC_GECKO_HAS_INDIVIDUAL_PIN_LOCATION |
|
CONFIG_SOC_GECKO_I2C |
|
CONFIG_SOC_GECKO_LETIMER |
|
CONFIG_SOC_GECKO_LEUART |
|
CONFIG_SOC_GECKO_MSC |
|
CONFIG_SOC_GECKO_PRS |
|
CONFIG_SOC_GECKO_RMU |
|
CONFIG_SOC_GECKO_RTC |
|
CONFIG_SOC_GECKO_RTCC |
|
CONFIG_SOC_GECKO_TIMER |
|
CONFIG_SOC_GECKO_USART |
|
CONFIG_SOC_GECKO_WDOG |
|
CONFIG_SOC_HIFI2_STD |
hifi2_std core |
CONFIG_SOC_HIFI3_BD5 |
hifi3_bd5 core |
CONFIG_SOC_HIFI3_BD5_CALL0 |
hifi3_bd5_call0 (hifi3_bd5 core with call0 ABI and 3 additional SW IRQs) |
CONFIG_SOC_HIFI4_BD7 |
hifi4_bd7 core |
CONFIG_SOC_HIFI_MINI |
hifi_mini core |
CONFIG_SOC_HIFI_MINI_4SWIRQ |
hifi_mini_4swIrq (hifi_mini core with 4 additional SW IRQs) |
CONFIG_SOC_IA32 |
Generic IA32 SoC |
CONFIG_SOC_INTEL_S1000 |
intel_s1000 |
CONFIG_SOC_LOG_LEVEL |
|
CONFIG_SOC_LOG_LEVEL_DBG |
Debug |
CONFIG_SOC_LOG_LEVEL_ERR |
Error |
CONFIG_SOC_LOG_LEVEL_INF |
Info |
CONFIG_SOC_LOG_LEVEL_OFF |
Off |
CONFIG_SOC_LOG_LEVEL_WRN |
Warning |
CONFIG_SOC_LPC54114_M0 |
SOC_LPC54114_M0 |
CONFIG_SOC_LPC54114_M4 |
SOC_LPC54114_M4 |
CONFIG_SOC_MCIMX6X_M4 |
SOC_MCIMX6X_M4 |
CONFIG_SOC_MCIMX7_M4 |
SOC_MCIMX7_M4 |
CONFIG_SOC_MEC1701_QSZ |
MEC1701_QSZ |
CONFIG_SOC_MIMXRT1021 |
SOC_MIMXRT1021 |
CONFIG_SOC_MIMXRT1051 |
SOC_MIMXRT1051 |
CONFIG_SOC_MIMXRT1052 |
SOC_MIMXRT1052 |
CONFIG_SOC_MIMXRT1061 |
SOC_MIMXRT1061 |
CONFIG_SOC_MIMXRT1062 |
SOC_MIMXRT1062 |
CONFIG_SOC_MIMXRT1064 |
SOC_MIMXRT1064 |
CONFIG_SOC_MK64F12 |
SOC_MK64F12 |
CONFIG_SOC_MKL25Z4 |
SOC_MKL25Z4 |
CONFIG_SOC_MKW22D5 |
SOC_MKW22D5 |
CONFIG_SOC_MKW24D5 |
SOC_MKW24D5 |
CONFIG_SOC_MKW40Z4 |
SOC_MKW40Z4 |
CONFIG_SOC_MKW41Z4 |
SOC_MKW41Z4 |
CONFIG_SOC_MPS2_AN385 |
ARM Cortex-M3 SMM on V2M-MPS2 (Application Note AN385) |
CONFIG_SOC_MSP432P401R |
MSP432P401R |
CONFIG_SOC_NIOS2F_ZEPHYR |
Nios IIf - Zephyr Golden Configuration |
CONFIG_SOC_NIOS2_QEMU |
Nios II - Experimental QEMU emulation |
CONFIG_SOC_NOINIT_LD |
|
CONFIG_SOC_NRF51822_QFAA |
NRF51822_QFAA |
CONFIG_SOC_NRF51822_QFAB |
NRF51822_QFAB |
CONFIG_SOC_NRF51822_QFAC |
NRF51822_QFAC |
CONFIG_SOC_NRF52810 |
|
CONFIG_SOC_NRF52810_QFAA |
NRF52810_QFAA |
CONFIG_SOC_NRF52832 |
|
CONFIG_SOC_NRF52832_CIAA |
NRF52832_CIAA |
CONFIG_SOC_NRF52832_QFAA |
NRF52832_QFAA |
CONFIG_SOC_NRF52832_QFAB |
NRF52832_QFAB |
CONFIG_SOC_NRF52840 |
|
CONFIG_SOC_NRF52840_QIAA |
NRF52840_QIAA |
CONFIG_SOC_NRF9160 |
|
CONFIG_SOC_NRF9160_SICA |
NRF9160_SICA |
CONFIG_SOC_NSIM |
Synopsys NSIM simulator for ARC EM |
CONFIG_SOC_NSIM_EM |
Synopsys ARC EM of nsim |
CONFIG_SOC_NSIM_SEM |
Synopsys ARC SEM of nsim |
CONFIG_SOC_OPENISA_RV32M1_RI5CY |
OpenISA RV32M1 RI5CY core |
CONFIG_SOC_OPENISA_RV32M1_RISCV32 |
OpenISA RV32M1 RISC-V cores |
CONFIG_SOC_OPENISA_RV32M1_ZERO_RISCY |
OpenISA RV32M1 ZERO-RISCY core |
CONFIG_SOC_PART_NUMBER |
|
CONFIG_SOC_PART_NUMBER_CY8C6247BZI_D54 |
CY8C6247BZI_D54 |
CONFIG_SOC_PART_NUMBER_EFM32HG322F64 |
|
CONFIG_SOC_PART_NUMBER_EFM32PG12B500F1024GL125 |
|
CONFIG_SOC_PART_NUMBER_EFM32WG990F256 |
|
CONFIG_SOC_PART_NUMBER_EFR32FG1P133F256GM48 |
|
CONFIG_SOC_PART_NUMBER_EFR32MG12P332F1024GL125 |
|
CONFIG_SOC_PART_NUMBER_IMX7_M4 |
|
CONFIG_SOC_PART_NUMBER_IMX_6X_M4 |
|
CONFIG_SOC_PART_NUMBER_IMX_RT |
|
CONFIG_SOC_PART_NUMBER_KINETIS_K6X |
|
CONFIG_SOC_PART_NUMBER_KINETIS_KL2X |
|
CONFIG_SOC_PART_NUMBER_KINETIS_KWX |
|
CONFIG_SOC_PART_NUMBER_LPC54114J256BD64 |
|
CONFIG_SOC_PART_NUMBER_LPC54XXX |
|
CONFIG_SOC_PART_NUMBER_MCIMX6X1EVK10AB |
|
CONFIG_SOC_PART_NUMBER_MCIMX6X1EVK10AC |
|
CONFIG_SOC_PART_NUMBER_MCIMX6X1EVO10AB |
|
CONFIG_SOC_PART_NUMBER_MCIMX6X1EVO10AC |
|
CONFIG_SOC_PART_NUMBER_MCIMX6X2EVN10AB |
|
CONFIG_SOC_PART_NUMBER_MCIMX6X2EVN10AC |
|
CONFIG_SOC_PART_NUMBER_MCIMX6X3EVK10AB |
|
CONFIG_SOC_PART_NUMBER_MCIMX6X3EVK10AC |
|
CONFIG_SOC_PART_NUMBER_MCIMX6X3EVN10AB |
|
CONFIG_SOC_PART_NUMBER_MCIMX6X3EVN10AC |
|
CONFIG_SOC_PART_NUMBER_MCIMX6X3EVO10AB |
|
CONFIG_SOC_PART_NUMBER_MCIMX6X3EVO10AC |
|
CONFIG_SOC_PART_NUMBER_MCIMX6X4EVM10AB |
|
CONFIG_SOC_PART_NUMBER_MCIMX6X4EVM10AC |
|
CONFIG_SOC_PART_NUMBER_MCIMX7D5EVM10SC |
|
CONFIG_SOC_PART_NUMBER_MCIMX7S3DVK08SA |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1021CAF4A |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1021CAG4A |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1021DAF5A |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1021DAG5A |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1051CVL5A |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1051DVL6A |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1052CVJ5B |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1052CVL5A |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1052CVL5B |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1052DVJ6B |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1052DVL6A |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1052DVL6B |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1061CVL5A |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1061DVL6A |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1062CVL5A |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1062DVL6A |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1064CVL5A |
|
CONFIG_SOC_PART_NUMBER_MIMXRT1064DVL6A |
|
CONFIG_SOC_PART_NUMBER_MK64FN1M0CAJ12 |
|
CONFIG_SOC_PART_NUMBER_MK64FN1M0VDC12 |
|
CONFIG_SOC_PART_NUMBER_MK64FN1M0VLL12 |
|
CONFIG_SOC_PART_NUMBER_MK64FN1M0VLQ12 |
|
CONFIG_SOC_PART_NUMBER_MK64FN1M0VMD12 |
|
CONFIG_SOC_PART_NUMBER_MK64FX512VDC12 |
|
CONFIG_SOC_PART_NUMBER_MK64FX512VLL12 |
|
CONFIG_SOC_PART_NUMBER_MK64FX512VLQ12 |
|
CONFIG_SOC_PART_NUMBER_MK64FX512VMD12 |
|
CONFIG_SOC_PART_NUMBER_MKL25Z128VFM4 |
|
CONFIG_SOC_PART_NUMBER_MKL25Z128VFT4 |
|
CONFIG_SOC_PART_NUMBER_MKL25Z128VLH4 |
|
CONFIG_SOC_PART_NUMBER_MKL25Z128VLK4 |
|
CONFIG_SOC_PART_NUMBER_MKL25Z32VFM4 |
|
CONFIG_SOC_PART_NUMBER_MKL25Z32VFT4 |
|
CONFIG_SOC_PART_NUMBER_MKL25Z32VLH4 |
|
CONFIG_SOC_PART_NUMBER_MKL25Z32VLK4 |
|
CONFIG_SOC_PART_NUMBER_MKL25Z64VFM4 |
|
CONFIG_SOC_PART_NUMBER_MKL25Z64VFT4 |
|
CONFIG_SOC_PART_NUMBER_MKL25Z64VLH4 |
|
CONFIG_SOC_PART_NUMBER_MKL25Z64VLK4 |
|
CONFIG_SOC_PART_NUMBER_MKW22D512VHA5 |
|
CONFIG_SOC_PART_NUMBER_MKW24D512VHA5 |
|
CONFIG_SOC_PART_NUMBER_MKW40Z160VHT4 |
|
CONFIG_SOC_PART_NUMBER_MKW41Z256VHT4 |
|
CONFIG_SOC_PART_NUMBER_MKW41Z512VHT4 |
|
CONFIG_SOC_PART_NUMBER_SAM3X4C |
SAM3X4C |
CONFIG_SOC_PART_NUMBER_SAM3X4E |
SAM3X4E |
CONFIG_SOC_PART_NUMBER_SAM3X8C |
SAM3X8C |
CONFIG_SOC_PART_NUMBER_SAM3X8E |
SAM3X8E |
CONFIG_SOC_PART_NUMBER_SAM3X8H |
SAM3X8H |
CONFIG_SOC_PART_NUMBER_SAM4S16B |
SAM4S16B |
CONFIG_SOC_PART_NUMBER_SAM4S16C |
SAM4S16C / SAM4S16C |
CONFIG_SOC_PART_NUMBER_SAM4S2A |
SAM4S2A |
CONFIG_SOC_PART_NUMBER_SAM4S2B |
SAM4S2B |
CONFIG_SOC_PART_NUMBER_SAM4S2C |
SAM4S2C |
CONFIG_SOC_PART_NUMBER_SAM4S4A |
SAM4S4A |
CONFIG_SOC_PART_NUMBER_SAM4S4B |
SAM4S4B |
CONFIG_SOC_PART_NUMBER_SAM4S4C |
SAM4S4C |
CONFIG_SOC_PART_NUMBER_SAM4S8B |
SAM4S8B |
CONFIG_SOC_PART_NUMBER_SAM4S8C |
SAM4S8C |
CONFIG_SOC_PART_NUMBER_SAMD20E14 |
SAMD20E14 |
CONFIG_SOC_PART_NUMBER_SAMD20E15 |
SAMD20E15 |
CONFIG_SOC_PART_NUMBER_SAMD20E16 |
SAMD20E16 |
CONFIG_SOC_PART_NUMBER_SAMD20E17 |
SAMD20E17 |
CONFIG_SOC_PART_NUMBER_SAMD20E18 |
SAMD20E18 |
CONFIG_SOC_PART_NUMBER_SAMD20G14 |
SAMD20G14 |
CONFIG_SOC_PART_NUMBER_SAMD20G15 |
SAMD20G15 |
CONFIG_SOC_PART_NUMBER_SAMD20G16 |
SAMD20G16 |
CONFIG_SOC_PART_NUMBER_SAMD20G17 |
SAMD20G17 |
CONFIG_SOC_PART_NUMBER_SAMD20G17U |
SAMD20G17U |
CONFIG_SOC_PART_NUMBER_SAMD20G18 |
SAMD20G18 |
CONFIG_SOC_PART_NUMBER_SAMD20G18U |
SAMD20G18U |
CONFIG_SOC_PART_NUMBER_SAMD20J14 |
SAMD20J14 |
CONFIG_SOC_PART_NUMBER_SAMD20J15 |
SAMD20J15 |
CONFIG_SOC_PART_NUMBER_SAMD20J16 |
SAMD20J16 |
CONFIG_SOC_PART_NUMBER_SAMD20J17 |
SAMD20J17 |
CONFIG_SOC_PART_NUMBER_SAMD20J18 |
SAMD20J18 |
CONFIG_SOC_PART_NUMBER_SAMD21E15A |
SAMD21E15A |
CONFIG_SOC_PART_NUMBER_SAMD21E16A |
SAMD21E16A |
CONFIG_SOC_PART_NUMBER_SAMD21E17A |
SAMD21E17A |
CONFIG_SOC_PART_NUMBER_SAMD21E18A |
SAMD21E18A |
CONFIG_SOC_PART_NUMBER_SAMD21G15A |
SAMD21G15A |
CONFIG_SOC_PART_NUMBER_SAMD21G16A |
SAMD21G16A |
CONFIG_SOC_PART_NUMBER_SAMD21G17A |
SAMD21G17A |
CONFIG_SOC_PART_NUMBER_SAMD21G17AU |
SAMD21G17AU |
CONFIG_SOC_PART_NUMBER_SAMD21G18A |
SAMD21G18A |
CONFIG_SOC_PART_NUMBER_SAMD21G18AU |
SAMD21G18AU |
CONFIG_SOC_PART_NUMBER_SAMD21J15A |
SAMD21J15A |
CONFIG_SOC_PART_NUMBER_SAMD21J16A |
SAMD21J16A |
CONFIG_SOC_PART_NUMBER_SAMD21J17A |
SAMD21J17A |
CONFIG_SOC_PART_NUMBER_SAMD21J18A |
SAMD21J18A |
CONFIG_SOC_PART_NUMBER_SAME70J19 |
SAME70J19 |
CONFIG_SOC_PART_NUMBER_SAME70J20 |
SAME70J20 |
CONFIG_SOC_PART_NUMBER_SAME70J21 |
SAME70J21 |
CONFIG_SOC_PART_NUMBER_SAME70N19 |
SAME70N19 |
CONFIG_SOC_PART_NUMBER_SAME70N20 |
SAME70N20 |
CONFIG_SOC_PART_NUMBER_SAME70N21 |
SAME70N21 |
CONFIG_SOC_PART_NUMBER_SAME70Q19 |
SAME70Q19 |
CONFIG_SOC_PART_NUMBER_SAME70Q20 |
SAME70Q20 |
CONFIG_SOC_PART_NUMBER_SAME70Q21 |
SAME70Q21 |
CONFIG_SOC_POSIX |
Native POSIX port |
CONFIG_SOC_PSOC6_M0 |
SOC_PSOC6_M0 |
CONFIG_SOC_PSOC6_M4 |
SOC_PSOC6_M4 |
CONFIG_SOC_QUARK_D2000 |
Intel Quark D2000 |
CONFIG_SOC_QUARK_SE_C1000 |
Intel Quark SE C1000 |
CONFIG_SOC_QUARK_SE_C1000_SS |
Intel Quark SE C1000- Sensor Sub System |
CONFIG_SOC_QUARK_SE_CURIE |
Intel Curie |
CONFIG_SOC_QUARK_X1000 |
Quark X1000 |
CONFIG_SOC_RISCV32_MIV |
Microsemi Mi-V system implementation |
CONFIG_SOC_RISCV32_SIFIVE_FREEDOM |
SiFive Freedom SOC implementation |
CONFIG_SOC_RODATA_LD |
|
CONFIG_SOC_RWDATA_LD |
|
CONFIG_SOC_SERIES |
|
CONFIG_SOC_SERIES_BEETLE |
ARM Beetle MCU Series |
CONFIG_SOC_SERIES_BSIM_NRF52X |
|
CONFIG_SOC_SERIES_BSIM_NRFXX |
|
CONFIG_SOC_SERIES_CC2650 |
TI SimpleLink Family CC2650 |
CONFIG_SOC_SERIES_CC32XX |
TI SimpleLink Family |
CONFIG_SOC_SERIES_EFM32HG |
EFM32HG Series MCU |
CONFIG_SOC_SERIES_EFM32PG12B |
EFM32PG12B Series MCU |
CONFIG_SOC_SERIES_EFM32WG |
EFM32WG Series MCU |
CONFIG_SOC_SERIES_EFR32FG1P |
EFR32FG1P Series MCU |
CONFIG_SOC_SERIES_EFR32MG12P |
EFR32MG12P Series MCU |
CONFIG_SOC_SERIES_IMX7_M4 |
i.MX7 M4 Core Series |
CONFIG_SOC_SERIES_IMX_6X_M4 |
i.MX 6SoloX M4 Core Series |
CONFIG_SOC_SERIES_IMX_RT |
i.MX RT Series |
CONFIG_SOC_SERIES_KINETIS_K6X |
Kinetis K6x Series MCU |
CONFIG_SOC_SERIES_KINETIS_KL2X |
Kinetis KL2x Series MCU |
CONFIG_SOC_SERIES_KINETIS_KWX |
Kinetis KWx Series MCU |
CONFIG_SOC_SERIES_LPC54XXX |
LPC LPC54xxx Series MCU |
CONFIG_SOC_SERIES_MEC1701X |
Microchip MEC1701X Series |
CONFIG_SOC_SERIES_MPS2 |
ARM MPS2 MCU Series |
CONFIG_SOC_SERIES_MSP432P4XX |
TI SimpleLink Family MSP432P4XX |
CONFIG_SOC_SERIES_MUSCA |
ARM v2m MUSCA MCU Series |
CONFIG_SOC_SERIES_NRF51X |
Nordic Semiconductor nRF51 series MCU |
CONFIG_SOC_SERIES_NRF52X |
Nordic Semiconductor nRF52 series MCU |
CONFIG_SOC_SERIES_NRF91X |
Nordic Semiconductor nRF91 series MCU |
CONFIG_SOC_SERIES_PSOC62 |
Cypress PSoC6 series MCU |
CONFIG_SOC_SERIES_QUARK_D2000 |
Quark D2000 Series MCU |
CONFIG_SOC_SERIES_QUARK_SE |
Quark SE Series MCU |
CONFIG_SOC_SERIES_QUARK_X1000 |
Intel Quark X1000 Series |
CONFIG_SOC_SERIES_RISCV32_MIV |
Microsemi Mi-V implementation |
CONFIG_SOC_SERIES_RISCV32_SIFIVE_FREEDOM |
SiFive Freedom SOC implementation |
CONFIG_SOC_SERIES_SAM3X |
Atmel SAM3X MCU |
CONFIG_SOC_SERIES_SAM4S |
Atmel SAM4S MCU |
CONFIG_SOC_SERIES_SAMD20 |
Atmel SAMD20 MCU |
CONFIG_SOC_SERIES_SAMD21 |
Atmel SAMD21 MCU |
CONFIG_SOC_SERIES_SAME70 |
Atmel SAME70 MCU |
CONFIG_SOC_SERIES_STM32F0X |
STM32F0x Series MCU |
CONFIG_SOC_SERIES_STM32F1X |
STM32F1x Series MCU |
CONFIG_SOC_SERIES_STM32F2X |
stm32f2x Series MCU |
CONFIG_SOC_SERIES_STM32F3X |
STM32F3x Series MCU |
CONFIG_SOC_SERIES_STM32F4X |
STM32F4x Series MCU |
CONFIG_SOC_SERIES_STM32F7X |
STM32F7x Series MCU |
CONFIG_SOC_SERIES_STM32L0X |
STM32L0x Series MCU |
CONFIG_SOC_SERIES_STM32L4X |
STM32L4x Series MCU |
CONFIG_SOC_STM32F030X8 |
STM32F030X8 |
CONFIG_SOC_STM32F051X8 |
STM32F051X8 |
CONFIG_SOC_STM32F070XB |
STM32F070XB |
CONFIG_SOC_STM32F072XB |
STM32F072XB |
CONFIG_SOC_STM32F091XC |
STM32F091XC |
CONFIG_SOC_STM32F103X8 |
STM32F103X8 |
CONFIG_SOC_STM32F103XB |
STM32F103XB |
CONFIG_SOC_STM32F103XE |
STM32F103XE |
CONFIG_SOC_STM32F107XC |
STM32F107XC |
CONFIG_SOC_STM32F10X_CONNECTIVITY_LINE_DEVICE |
|
CONFIG_SOC_STM32F10X_DENSITY_DEVICE |
|
CONFIG_SOC_STM32F207XE |
STM32F207XE |
CONFIG_SOC_STM32F207XG |
STM32F207XG |
CONFIG_SOC_STM32F302X8 |
STM32F302X8 |
CONFIG_SOC_STM32F303XC |
STM32F303XC |
CONFIG_SOC_STM32F334X8 |
STM32F334X8 |
CONFIG_SOC_STM32F373XC |
STM32F373XC |
CONFIG_SOC_STM32F401XE |
STM32F401XE |
CONFIG_SOC_STM32F405XG |
STM32F405XG |
CONFIG_SOC_STM32F407XG |
STM32F407XG |
CONFIG_SOC_STM32F411XE |
STM32F411XE |
CONFIG_SOC_STM32F412CG |
STM32F412CG |
CONFIG_SOC_STM32F412ZG |
STM32F412ZG |
CONFIG_SOC_STM32F413XX |
STM32F413XX |
CONFIG_SOC_STM32F417XE |
STM32F417XE |
CONFIG_SOC_STM32F417XG |
STM32F417XG |
CONFIG_SOC_STM32F429XI |
STM32F429XI |
CONFIG_SOC_STM32F446XE |
STM32F446XE |
CONFIG_SOC_STM32F469XI |
STM32F469XI |
CONFIG_SOC_STM32F723XE |
STM32F723XE |
CONFIG_SOC_STM32F746XG |
STM32F746XG |
CONFIG_SOC_STM32F756XX |
STM32F756XX |
CONFIG_SOC_STM32F769XI |
STM32F769XI |
CONFIG_SOC_STM32L053X8 |
STM32L053X8 |
CONFIG_SOC_STM32L072XZ |
STM32L072XZ |
CONFIG_SOC_STM32L073XZ |
STM32L073XZ |
CONFIG_SOC_STM32L432XC |
STM32L432XC |
CONFIG_SOC_STM32L433XC |
STM32L433XC |
CONFIG_SOC_STM32L452XC |
STM32L452XC |
CONFIG_SOC_STM32L471XX |
STM32L471XX |
CONFIG_SOC_STM32L475XG |
STM32L475XG |
CONFIG_SOC_STM32L476XG |
STM32L476XG |
CONFIG_SOC_STM32L496XG |
STM32L496XG |
CONFIG_SOC_STM32L4R5XI |
STM32L4R5XI |
CONFIG_SOC_TI_LM3S6965 |
TI LM3S6965 |
CONFIG_SOC_TI_LM3S6965_QEMU |
|
CONFIG_SOC_V2M_MUSCA_A |
ARM Cortex-M33 SMM-SSE-200 on V2M-MUSCA |
CONFIG_SOC_X86_64 |
Generic x86_64 PC |
CONFIG_SOC_XRC_D2PM_5SWIRQ |
XRC_D2PM_5swIrq (XRC_D2PM core with 4 additional SW IRQs) |
CONFIG_SOC_XRC_FUSION_AON_ALL_LM |
XRC_FUSION_AON_ALL_LM core |
CONFIG_SOC_XTENSA_SAMPLE_CONTROLLER |
Xtensa sample_controller core |
CONFIG_SPEED_OPTIMIZATIONS |
Optimize for speed |
CONFIG_SPI |
SPI hardware bus support |
CONFIG_SPI_0 |
SPI port 0 |
CONFIG_SPI_0_NRF_ORC |
SPI Port 0 over-read character |
CONFIG_SPI_0_NRF_SPI |
nRF SPI 0 |
CONFIG_SPI_0_NRF_SPIM |
nRF SPIM 0 |
CONFIG_SPI_0_NRF_SPIS |
nRF SPIS 0 |
CONFIG_SPI_0_OP_MODES |
Port 0 supported operation modes (master/slave/both) |
CONFIG_SPI_1 |
SPI port 1 |
CONFIG_SPI_1_NRF_ORC |
SPI Port 1 over-read character |
CONFIG_SPI_1_NRF_SPI |
nRF SPI 1 |
CONFIG_SPI_1_NRF_SPIM |
nRF SPIM 1 |
CONFIG_SPI_1_NRF_SPIS |
nRF SPIS 1 |
CONFIG_SPI_1_OP_MODES |
Port 1 supported operation modes (master/slave/both) |
CONFIG_SPI_2 |
SPI port 2 |
CONFIG_SPI_2_NRF_ORC |
SPI Port 2 over-read character |
CONFIG_SPI_2_NRF_SPI |
nRF SPI 2 |
CONFIG_SPI_2_NRF_SPIM |
nRF SPIM 2 |
CONFIG_SPI_2_NRF_SPIS |
nRF SPIS 2 |
CONFIG_SPI_2_OP_MODES |
Port 2 supported operation modes (master/slave/both) |
CONFIG_SPI_3 |
SPI port 3 |
CONFIG_SPI_3_NRF_ORC |
SPI Port 3 over-read character |
CONFIG_SPI_3_NRF_RX_DELAY |
SPIM3 MISO sampling delay |
CONFIG_SPI_3_NRF_SPIM |
nRF SPIM 3 |
CONFIG_SPI_3_NRF_SPIS |
nRF SPIS 3 |
CONFIG_SPI_3_OP_MODES |
Port 3 supported operation modes (master/slave/both) |
CONFIG_SPI_4 |
SPI port 4 |
CONFIG_SPI_4_OP_MODES |
Port 4 supported operation modes (master/slave/both) |
CONFIG_SPI_5 |
SPI port 5 |
CONFIG_SPI_5_OP_MODES |
Port 5 supported operation modes (master/slave/both) |
CONFIG_SPI_6 |
SPI port 6 |
CONFIG_SPI_6_OP_MODES |
Port 6 supported operation modes (master/slave/both) |
CONFIG_SPI_ASYNC |
Enable Asynchronous call support |
CONFIG_SPI_DW |
Designware SPI controller driver |
CONFIG_SPI_DW_ARC_AUX_REGS |
Registers are part of ARC auxiliary registers |
CONFIG_SPI_DW_FIFO_DEPTH |
RX and TX FIFO Depth |
CONFIG_SPI_DW_PORT_0_CLOCK_GATE |
Enable clock gating |
CONFIG_SPI_DW_PORT_0_CLOCK_GATE_DRV_NAME |
|
CONFIG_SPI_DW_PORT_0_CLOCK_GATE_SUBSYS |
Clock controller’s subsystem |
CONFIG_SPI_DW_PORT_0_INTERRUPT_SINGLE_LINE |
Single interrupt line for all interrupts |
CONFIG_SPI_DW_PORT_1_CLOCK_GATE |
Enable clock gating |
CONFIG_SPI_DW_PORT_1_CLOCK_GATE_DRV_NAME |
|
CONFIG_SPI_DW_PORT_1_CLOCK_GATE_SUBSYS |
Clock controller’s subsystem |
CONFIG_SPI_DW_PORT_1_INTERRUPT_SINGLE_LINE |
Single interrupt line for all interrupts |
CONFIG_SPI_DW_PORT_2_CLOCK_GATE |
Enable clock gating |
CONFIG_SPI_DW_PORT_2_CLOCK_GATE_DRV_NAME |
|
CONFIG_SPI_DW_PORT_2_CLOCK_GATE_SUBSYS |
Clock controller’s subsystem |
CONFIG_SPI_DW_PORT_2_INTERRUPT_SINGLE_LINE |
Single interrupt line for all interrupts |
CONFIG_SPI_DW_PORT_3_CLOCK_GATE |
Enable clock gating |
CONFIG_SPI_DW_PORT_3_CLOCK_GATE_DRV_NAME |
|
CONFIG_SPI_DW_PORT_3_CLOCK_GATE_SUBSYS |
Clock controller’s subsystem |
CONFIG_SPI_DW_PORT_3_INTERRUPT_SINGLE_LINE |
Single interrupt line for all interrupts |
CONFIG_SPI_FLASH_W25QXXDV |
SPI NOR Flash Winbond W25QXXDV |
CONFIG_SPI_FLASH_W25QXXDV_DEVICE_ID |
Device ID in hex |
CONFIG_SPI_FLASH_W25QXXDV_DRV_NAME |
SPI flash device name |
CONFIG_SPI_FLASH_W25QXXDV_FLASH_SIZE |
Flash size in bytes |
CONFIG_SPI_FLASH_W25QXXDV_GPIO_CS_WAIT_DELAY |
Delay time in us |
CONFIG_SPI_FLASH_W25QXXDV_GPIO_SPI_CS |
Manage SPI CS through a GPIO pin |
CONFIG_SPI_FLASH_W25QXXDV_INIT_PRIORITY |
|
CONFIG_SPI_FLASH_W25QXXDV_PAGE_PROGRAM_SIZE |
Page Program Size in bytes |
CONFIG_SPI_INIT_PRIORITY |
Init priority |
CONFIG_SPI_INTEL |
Intel SPI controller driver |
CONFIG_SPI_LOG_LEVEL |
|
CONFIG_SPI_LOG_LEVEL_DBG |
Debug |
CONFIG_SPI_LOG_LEVEL_ERR |
Error |
CONFIG_SPI_LOG_LEVEL_INF |
Info |
CONFIG_SPI_LOG_LEVEL_OFF |
Off |
CONFIG_SPI_LOG_LEVEL_WRN |
Warning |
CONFIG_SPI_MCUX_DSPI |
MCUX SPI driver |
CONFIG_SPI_MCUX_LPSPI |
MCUX SPI driver |
CONFIG_SPI_NOR |
SPI NOR Flash |
CONFIG_SPI_NOR_CS_WAIT_DELAY |
Delay time in us |
CONFIG_SPI_NOR_INIT_PRIORITY |
|
CONFIG_SPI_NOR_PAGE_SIZE |
Page size of SPI flash |
CONFIG_SPI_NOR_SECTOR_SIZE |
Sector size of SPI flash |
CONFIG_SPI_NRFX |
nRF SPI nrfx drivers |
CONFIG_SPI_NRFX_RAM_BUFFER_SIZE |
Size of RAM buffers for SPIM peripherals |
CONFIG_SPI_NRFX_SPIM_MISO_NO_PULL |
no pull |
CONFIG_SPI_NRFX_SPIM_MISO_PULL_DOWN |
pull down |
CONFIG_SPI_NRFX_SPIM_MISO_PULL_UP |
pull up |
CONFIG_SPI_NRFX_SPI_MISO_NO_PULL |
no pull |
CONFIG_SPI_NRFX_SPI_MISO_PULL_DOWN |
pull down |
CONFIG_SPI_NRFX_SPI_MISO_PULL_UP |
pull up |
CONFIG_SPI_SAM |
Atmel SAM series SPI driver |
CONFIG_SPI_SAM0 |
Atmel SAM0 series SERCOM SPI driver |
CONFIG_SPI_SAME70_PORT_0_PIN_CS0 |
CS0 pin |
CONFIG_SPI_SAME70_PORT_0_PIN_CS1_PA31 |
PA31 |
CONFIG_SPI_SAME70_PORT_0_PIN_CS1_PD25 |
PD25 |
CONFIG_SPI_SAME70_PORT_0_PIN_CS2 |
CS2 pin |
CONFIG_SPI_SAME70_PORT_0_PIN_CS3 |
CS3 pin |
CONFIG_SPI_SAME70_PORT_1_PIN_CS0 |
CS0 pin |
CONFIG_SPI_SAME70_PORT_1_PIN_CS1_PC28 |
PC28 |
CONFIG_SPI_SAME70_PORT_1_PIN_CS1_PD0 |
PD0 |
CONFIG_SPI_SAME70_PORT_1_PIN_CS2_PC29 |
PC29 |
CONFIG_SPI_SAME70_PORT_1_PIN_CS2_PD1 |
PD1 |
CONFIG_SPI_SAME70_PORT_1_PIN_CS3_PC30 |
PC30 |
CONFIG_SPI_SAME70_PORT_1_PIN_CS3_PD2 |
PD2 |
CONFIG_SPI_SAM_PORT_0 |
Enable SPI0 |
CONFIG_SPI_SAM_PORT_1 |
Enable SPI1 |
CONFIG_SPI_SIFIVE |
SiFive SPI controller driver |
CONFIG_SPI_SLAVE |
Enable Slave support [EXPERIMENTAL] |
CONFIG_SPI_STM32 |
STM32 MCU SPI controller driver |
CONFIG_SPI_STM32_HAS_FIFO |
|
CONFIG_SPI_STM32_INTERRUPT |
STM32 MCU SPI Interrupt Support |
CONFIG_SRAM_BASE_ADDRESS |
SRAM Base Address |
CONFIG_SRAM_SIZE |
SRAM Size in kB |
CONFIG_SSD1306 |
SSD1306 display driver |
CONFIG_SSD1306_DEFAULT |
Default SSD1306 controller |
CONFIG_SSD1306_DEFAULT_CONTRAST |
SSD1306 default contrast |
CONFIG_SSD1306_SH1106_COMPATIBLE |
Enable SH1106 compatible mode |
CONFIG_SSD1673 |
SSD1673 display driver |
CONFIG_SSD1673_EPD_GDE0213B1 |
GDE0213B1 2.13” |
CONFIG_SSE |
SSE registers |
CONFIG_SSE_FP_MATH |
Compiler-generated SSEx instructions |
CONFIG_SS_RESET_VECTOR |
Sensor Subsystem Reset Vector |
CONFIG_STACK_ALIGN_DOUBLE_WORD |
Align stacks on double-words (8 octets) |
CONFIG_STACK_CANARIES |
Compiler stack canaries |
CONFIG_STACK_GROWS_UP |
Stack grows towards higher memory addresses |
CONFIG_STACK_POINTER_RANDOM |
Initial stack pointer randomization bounds |
CONFIG_STACK_SENTINEL |
Enable stack sentinel |
CONFIG_STACK_USAGE |
Generate stack usage information |
CONFIG_STATS |
Statistics support |
CONFIG_STATS_NAMES |
Statistic names |
CONFIG_STAT_MGMT_MAX_NAME_LEN |
Maximum stat group name length |
CONFIG_STDOUT_CONSOLE |
Send stdout to console |
CONFIG_STD_CPP11 |
C++ 11 |
CONFIG_STD_CPP14 |
C++ 14 |
CONFIG_STD_CPP17 |
C++ 17 |
CONFIG_STD_CPP2A |
C++ 2a |
CONFIG_STD_CPP98 |
C++ 98 |
CONFIG_SWAP_NONATOMIC |
|
CONFIG_SW_ISR_TABLE |
Enable software interrupt handler table |
CONFIG_SW_VECTOR_RELAY |
Enable Software Vector Relay |
CONFIG_SX9500 |
SX9500 I2C SAR Proximity Chip |
CONFIG_SX9500_DEV_NAME |
SX9500 device name |
CONFIG_SX9500_GPIO_CONTROLLER |
GPIO controller for SX9500 interrupt |
CONFIG_SX9500_GPIO_PIN |
GPIO pin for SX9500 interrupt |
CONFIG_SX9500_I2C_ADDR |
SX9500 I2C slave address |
CONFIG_SX9500_I2C_DEV_NAME |
I2C master where SX9500 is connected |
CONFIG_SX9500_PROX_CHANNEL |
Proximity channel to use |
CONFIG_SX9500_THREAD_PRIORITY |
Thread priority |
CONFIG_SX9500_THREAD_STACK_SIZE |
Sensor delayed work thread stack size |
CONFIG_SX9500_TRIGGER |
|
CONFIG_SX9500_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_SX9500_TRIGGER_NONE |
No trigger |
CONFIG_SX9500_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_SYSTEM_CLOCK_DISABLE |
API to disable system clock |
CONFIG_SYSTEM_CLOCK_INIT_PRIORITY |
System clock driver initialization priority |
CONFIG_SYSTEM_WORKQUEUE_PRIORITY |
System workqueue priority |
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE |
System workqueue stack size |
CONFIG_SYS_CLOCK_EXISTS |
|
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC |
Hardware clock cycles per second, 2000000 for ISS / System clock’s h/w timer frequency |
CONFIG_SYS_CLOCK_TICKS_PER_SEC |
System tick frequency (in ticks/second) |
CONFIG_SYS_PM_DEBUG |
Enable System Power Management debug hooks |
CONFIG_SYS_PM_LOG_LEVEL |
|
CONFIG_SYS_PM_LOG_LEVEL_DBG |
Debug |
CONFIG_SYS_PM_LOG_LEVEL_ERR |
Error |
CONFIG_SYS_PM_LOG_LEVEL_INF |
Info |
CONFIG_SYS_PM_LOG_LEVEL_OFF |
Off |
CONFIG_SYS_PM_LOG_LEVEL_WRN |
Warning |
CONFIG_SYS_PM_MIN_RESIDENCY_DEEP_SLEEP_1 |
Deep Sleep State 1 minimum residency |
CONFIG_SYS_PM_MIN_RESIDENCY_DEEP_SLEEP_2 |
Deep Sleep State 2 minimum residency |
CONFIG_SYS_PM_MIN_RESIDENCY_DEEP_SLEEP_3 |
Deep Sleep State 3 minimum residency |
CONFIG_SYS_PM_MIN_RESIDENCY_SLEEP_1 |
Sleep State 1 minimum residency |
CONFIG_SYS_PM_MIN_RESIDENCY_SLEEP_2 |
Sleep State 2 minimum residency |
CONFIG_SYS_PM_MIN_RESIDENCY_SLEEP_3 |
Sleep State 3 minimum residency |
CONFIG_SYS_PM_POLICY_APP |
Application PM Policy |
CONFIG_SYS_PM_POLICY_DUMMY |
Dummy PM Policy |
CONFIG_SYS_PM_POLICY_RESIDENCY |
PM Policy based on CPU residency |
CONFIG_SYS_PM_STATE_LOCK |
Enable Power State locking capability |
CONFIG_SYS_POWER_DEEP_SLEEP_STATES |
Deep Sleep states |
CONFIG_SYS_POWER_MANAGEMENT |
System Power management |
CONFIG_SYS_POWER_SLEEP_STATES |
Low Power states |
CONFIG_TEMP_NRF5 |
nRF5 Temperature Sensor |
CONFIG_TEMP_NRF5_NAME |
Driver name |
CONFIG_TEST |
Mark project as a test |
CONFIG_TEST_ENABLE_USERSPACE |
|
CONFIG_TEST_EXTRA_STACKSIZE |
Test function extra thread stack size |
CONFIG_TEST_FLASH_DRIVERS |
Test flash drivers |
CONFIG_TEST_HW_STACK_PROTECTION |
Enable hardware-based stack overflow detection if available |
CONFIG_TEST_RANDOM_GENERATOR |
Non-random number generator |
CONFIG_TEST_SHELL |
Enable various shells for testing |
CONFIG_TEST_USERSPACE |
Indicate that this test exercises user mode |
CONFIG_TEXT_SECTION_OFFSET |
TEXT section offset |
CONFIG_TH02 |
TH02 Temperature Sensor |
CONFIG_TH02_I2C_MASTER_DEV_NAME |
I2C Master |
CONFIG_TH02_NAME |
Driver name |
CONFIG_THREAD_CUSTOM_DATA |
Thread custom data |
CONFIG_THREAD_MAX_NAME_LEN |
Max length of a thread name |
CONFIG_THREAD_MONITOR |
Thread monitoring [EXPERIMENTAL] |
CONFIG_THREAD_NAME |
Thread name [EXPERIMENTAL] |
CONFIG_THREAD_STACK_INFO |
Thread stack info |
CONFIG_THREAD_USERSPACE_LOCAL_DATA |
|
CONFIG_THREAD_USERSPACE_LOCAL_DATA_ARCH_DEFER_SETUP |
|
CONFIG_TICKLESS_CAPABLE |
Timer driver supports tickless operation |
CONFIG_TICKLESS_IDLE |
Tickless idle |
CONFIG_TICKLESS_IDLE_THRESH |
Tickless idle threshold |
CONFIG_TICKLESS_KERNEL |
Tickless kernel |
CONFIG_TIMER_DTMR_CMSDK_APB |
ARM CMSDK (Cortex-M System Design Kit) DTMR Timer driver |
CONFIG_TIMER_RANDOM_GENERATOR |
System timer clock based number generator |
CONFIG_TIMER_READS_ITS_FREQUENCY_AT_RUNTIME |
Timer queries its hardware to find its frequency at runtime |
CONFIG_TIMER_TMR_CMSDK_APB |
ARM CMSDK (Cortex-M System Design Kit) Timer driver |
CONFIG_TIMESLICE_PRIORITY |
Time slicing thread priority ceiling |
CONFIG_TIMESLICE_SIZE |
Time slice size (in ms) |
CONFIG_TIMESLICING |
Thread time slicing |
CONFIG_TINYCBOR |
tinyCBOR Support |
CONFIG_TINYCRYPT |
TinyCrypt Support |
CONFIG_TINYCRYPT_AES |
AES-128 decrypt/encrypt |
CONFIG_TINYCRYPT_AES_CBC |
AES-128 block cipher |
CONFIG_TINYCRYPT_AES_CCM |
AES-128 CCM mode |
CONFIG_TINYCRYPT_AES_CMAC |
AES-128 CMAC mode |
CONFIG_TINYCRYPT_AES_CTR |
AES-128 counter mode |
CONFIG_TINYCRYPT_CTR_PRNG |
PRNG in counter mode |
CONFIG_TINYCRYPT_ECC_DH |
ECC_DH anonymous key agreement protocol |
CONFIG_TINYCRYPT_ECC_DSA |
ECC_DSA digital signature algorithm |
CONFIG_TINYCRYPT_SHA256 |
SHA-256 Hash function support |
CONFIG_TINYCRYPT_SHA256_HMAC |
HMAC (via SHA256) message auth support |
CONFIG_TINYCRYPT_SHA256_HMAC_PRNG |
PRNG (via HMAC-SHA256) support |
CONFIG_TI_CCFG_PRESENT |
|
CONFIG_TLS_CREDENTIALS |
TLS credentials management |
CONFIG_TLS_CREDENTIAL_FILENAMES |
Specify TLS credential filenames |
CONFIG_TLS_MAX_CREDENTIALS_NUMBER |
Maximum number of TLS credentials |
CONFIG_TMP007 |
TMP007 Infrared Thermopile Sensor |
CONFIG_TMP007_GPIO_DEV_NAME |
GPIO device |
CONFIG_TMP007_GPIO_PIN_NUM |
Interrupt GPIO pin number |
CONFIG_TMP007_I2C_ADDR |
I2C address for TMP006 Sensor |
CONFIG_TMP007_I2C_MASTER_DEV_NAME |
I2C master where TMP007 is connected |
CONFIG_TMP007_NAME |
Driver name |
CONFIG_TMP007_THREAD_PRIORITY |
Thread priority |
CONFIG_TMP007_THREAD_STACK_SIZE |
Thread stack size |
CONFIG_TMP007_TRIGGER |
|
CONFIG_TMP007_TRIGGER_GLOBAL_THREAD |
Use global thread |
CONFIG_TMP007_TRIGGER_NONE |
No trigger |
CONFIG_TMP007_TRIGGER_OWN_THREAD |
Use own thread |
CONFIG_TMP112 |
TMP112 Temperature Sensor |
CONFIG_TMP112_I2C_ADDR |
I2C address for TMP112 |
CONFIG_TMP112_I2C_MASTER_DEV_NAME |
I2C master where TMP112 is connected |
CONFIG_TMP112_NAME |
Driver name |
CONFIG_TRACING |
Enabling Tracing |
CONFIG_TRACING_CPU_STATS |
Enable CPU usage tracing |
CONFIG_TRACING_CPU_STATS_INTERVAL |
Logging interval for CPU measurements [ms] |
CONFIG_TRACING_CPU_STATS_LOG |
Enable current CPU usage logging |
CONFIG_TRACING_CTF |
Tracing via Common Trace Format support |
CONFIG_TRACING_CTF_BOTTOM_POSIX |
CTF backend for the native_posix port, using a file in the host filesystem |
CONFIG_TRUSTED_EXECUTION_NONSECURE |
Trusted Execution: Non-Secure firmware image |
CONFIG_TRUSTED_EXECUTION_SECURE |
Trusted Execution: Secure firmware image |
CONFIG_TSC_CYCLES_PER_SEC |
Frequency of x86 CPU timestamp counter |
CONFIG_UARTE_NRF_HW_ASYNC |
|
CONFIG_UART_0_ASYNC |
Enable Asynchronous API support on port 0 |
CONFIG_UART_0_INTERRUPT_DRIVEN |
Enable interrupt support on port 0 |
CONFIG_UART_0_NRF_FLOW_CONTROL |
Enable flow control |
CONFIG_UART_0_NRF_HW_ASYNC |
Use hardware RX byte counting |
CONFIG_UART_0_NRF_HW_ASYNC_TIMER |
Timer instance |
CONFIG_UART_0_NRF_PARITY_BIT |
Enable parity bit |
CONFIG_UART_0_NRF_TX_BUFFER_SIZE |
Size of RAM buffer |
CONFIG_UART_0_NRF_UART |
nRF UART 0 |
CONFIG_UART_0_NRF_UARTE |
nRF UARTE 0 |
CONFIG_UART_1 |
Enable STM32 USART1 Port |
CONFIG_UART_10 |
Enable STM32 UART10 Port |
CONFIG_UART_1_ASYNC |
Enable Asynchronous API support on port 1 |
CONFIG_UART_1_INTERRUPT_DRIVEN |
Enable interrupt support on port 1 |
CONFIG_UART_1_NRF_FLOW_CONTROL |
Enable flow control |
CONFIG_UART_1_NRF_HW_ASYNC |
Use hardware RX byte counting |
CONFIG_UART_1_NRF_HW_ASYNC_TIMER |
Timer instance |
CONFIG_UART_1_NRF_PARITY_BIT |
Enable parity bit |
CONFIG_UART_1_NRF_TX_BUFFER_SIZE |
Size of RAM buffer |
CONFIG_UART_1_NRF_UARTE |
nRF UARTE 1 |
CONFIG_UART_2 |
Enable STM32 USART2 Port |
CONFIG_UART_2_ASYNC |
Enable Asynchronous API support on port 2 |
CONFIG_UART_2_INTERRUPT_DRIVEN |
Enable interrupt support on port 2 |
CONFIG_UART_2_NRF_FLOW_CONTROL |
Enable flow control |
CONFIG_UART_2_NRF_HW_ASYNC |
Use hardware RX byte counting |
CONFIG_UART_2_NRF_HW_ASYNC_TIMER |
Timer instance |
CONFIG_UART_2_NRF_PARITY_BIT |
Enable parity bit |
CONFIG_UART_2_NRF_TX_BUFFER_SIZE |
Size of RAM buffer |
CONFIG_UART_2_NRF_UARTE |
nRF UARTE 2 |
CONFIG_UART_3 |
Enable STM32 USART3 Port |
CONFIG_UART_3_ASYNC |
Enable Asynchronous API support on port 3 |
CONFIG_UART_3_INTERRUPT_DRIVEN |
Enable interrupt support on port 3 |
CONFIG_UART_3_NRF_FLOW_CONTROL |
Enable flow control |
CONFIG_UART_3_NRF_HW_ASYNC |
Use hardware RX byte counting |
CONFIG_UART_3_NRF_HW_ASYNC_TIMER |
Timer instance |
CONFIG_UART_3_NRF_PARITY_BIT |
Enable parity bit |
CONFIG_UART_3_NRF_TX_BUFFER_SIZE |
Size of RAM buffer |
CONFIG_UART_3_NRF_UARTE |
nRF UARTE 3 |
CONFIG_UART_4 |
Enable STM32 U(S)ART4 Port |
CONFIG_UART_5 |
Enable STM32 U(S)ART5 Port |
CONFIG_UART_6 |
Enable STM32 USART6 Port |
CONFIG_UART_7 |
Enable STM32 U(S)ART7 Port |
CONFIG_UART_8 |
Enable STM32 U(S)ART8 Port |
CONFIG_UART_9 |
Enable STM32 UART9 Port |
CONFIG_UART_ALTERA_JTAG |
Nios II JTAG UART driver |
CONFIG_UART_ASYNC_API |
Enable new asynchronous UART API [EXPERIMENTAL] |
CONFIG_UART_CC32XX |
CC32XX UART driver |
CONFIG_UART_CMSDK_APB |
ARM CMSDK APB UART driver |
CONFIG_UART_CONSOLE |
Use UART for console |
CONFIG_UART_CONSOLE_DEBUG_SERVER_HOOKS |
Debug server hooks in debug console |
CONFIG_UART_CONSOLE_INIT_PRIORITY |
Init priority |
CONFIG_UART_CONSOLE_MCUMGR |
Enable UART console mcumgr passthrough |
CONFIG_UART_CONSOLE_ON_DEV_NAME |
Device Name of UART Device for UART Console |
CONFIG_UART_DRV_CMD |
Enable driver commands API |
CONFIG_UART_ESP32 |
ESP32 UART driver |
CONFIG_UART_GECKO |
Gecko UART/USART driver |
CONFIG_UART_IMX |
NXP i.MX7 family processor UART driver |
CONFIG_UART_IMX_UART_1 |
Enable NXP i.MX7 UART1 Port |
CONFIG_UART_IMX_UART_2 |
Enable NXP i.MX7 UART2 Port |
CONFIG_UART_IMX_UART_3 |
Enable NXP i.MX7 UART3 Port |
CONFIG_UART_IMX_UART_4 |
Enable NXP i.MX7 UART4 Port |
CONFIG_UART_IMX_UART_5 |
Enable NXP i.MX7 UART5 Port |
CONFIG_UART_IMX_UART_6 |
Enable NXP i.MX7 UART6 Port |
CONFIG_UART_IMX_UART_7 |
Enable NXP i.MX7 UART7 Port |
CONFIG_UART_INTERRUPT_DRIVEN |
Enable UART Interrupt support |
CONFIG_UART_LINE_CTRL |
Enable Serial Line Control API |
CONFIG_UART_MCUMGR |
Enable mcumgr UART driver |
CONFIG_UART_MCUMGR_ON_DEV_NAME |
Device Name of UART Device for mcumgr UART |
CONFIG_UART_MCUMGR_RX_BUF_COUNT |
Number of receive buffers for mcumgr fragments received over UART |
CONFIG_UART_MCUMGR_RX_BUF_SIZE |
Size of receive buffer for mcumgr fragments received over UART, in bytes |
CONFIG_UART_MCUX |
MCUX uart driver |
CONFIG_UART_MCUX_0 |
UART 0 |
CONFIG_UART_MCUX_1 |
UART 1 |
CONFIG_UART_MCUX_2 |
UART 2 |
CONFIG_UART_MCUX_3 |
UART 3 |
CONFIG_UART_MCUX_4 |
UART 4 |
CONFIG_UART_MCUX_5 |
UART 5 |
CONFIG_UART_MCUX_LPSCI |
MCUX LPSCI driver |
CONFIG_UART_MCUX_LPSCI_0 |
UART 0 |
CONFIG_UART_MCUX_LPUART |
MCUX LPUART driver |
CONFIG_UART_MCUX_LPUART_0 |
UART 0 |
CONFIG_UART_MCUX_LPUART_1 |
UART 1 |
CONFIG_UART_MCUX_LPUART_2 |
UART 2 |
CONFIG_UART_MCUX_LPUART_3 |
UART 3 |
CONFIG_UART_MIV |
Mi-V serial driver |
CONFIG_UART_MIV_PORT_0 |
Enable Mi-V Port 0 |
CONFIG_UART_MSP432P4XX |
MSP432P4XX UART driver |
CONFIG_UART_NATIVE_POSIX |
UART driver for native_posix |
CONFIG_UART_NATIVE_POSIX_PORT_0_NAME |
Port 0 Device Name |
CONFIG_UART_NRFX |
nRF UART nrfx drivers |
CONFIG_UART_NS16550 |
NS16550 serial driver |
CONFIG_UART_NS16550_DLF |
Enable Divisor Latch Fraction (DLF) support |
CONFIG_UART_NS16550_DRV_CMD |
Enable Driver Commands |
CONFIG_UART_NS16550_LINE_CTRL |
Enable Serial Line Control for Apps |
CONFIG_UART_NS16550_PCI |
Enable PCI Support |
CONFIG_UART_NS16550_PCP |
Enable Apollo Lake PRV_CLOCK_PARAMS (PCP) support |
CONFIG_UART_NS16550_PORT_0 |
Enable NS16550 Port 0 |
CONFIG_UART_NS16550_PORT_0_DLF |
Port 0 DLF value |
CONFIG_UART_NS16550_PORT_0_OPTIONS |
Port 0 Options |
CONFIG_UART_NS16550_PORT_0_PCI |
Port 0 is PCI-based |
CONFIG_UART_NS16550_PORT_0_PCP |
Port 0 PCP value |
CONFIG_UART_NS16550_PORT_1 |
Enable NS16550 Port 1 |
CONFIG_UART_NS16550_PORT_1_DLF |
Port 1 DLF value |
CONFIG_UART_NS16550_PORT_1_OPTIONS |
Port 1 Options |
CONFIG_UART_NS16550_PORT_1_PCI |
Port 1 is PCI-based |
CONFIG_UART_NS16550_PORT_1_PCP |
Port 1 PCP value |
CONFIG_UART_NS16550_PORT_2 |
Enable NS16550 Port 2 |
CONFIG_UART_NS16550_PORT_2_DLF |
Port 2 DLF value |
CONFIG_UART_NS16550_PORT_2_OPTIONS |
Port 2 Options |
CONFIG_UART_NS16550_PORT_2_PCI |
Port 2 is PCI-based |
CONFIG_UART_NS16550_PORT_2_PCP |
Port 2 PCP value |
CONFIG_UART_NS16550_PORT_3 |
Enable NS16550 Port 3 |
CONFIG_UART_NS16550_PORT_3_DLF |
Port 3 DLF value |
CONFIG_UART_NS16550_PORT_3_OPTIONS |
Port 3 Options |
CONFIG_UART_NS16550_PORT_3_PCI |
Port 3 is PCI-based |
CONFIG_UART_NS16550_PORT_3_PCP |
Port 3 PCP value |
CONFIG_UART_NS16750 |
Enable 64-bytes FIFO for UART 16750 |
CONFIG_UART_NSIM |
UART driver for MetaWare nSim |
CONFIG_UART_PIPE |
Enable pipe UART driver |
CONFIG_UART_PIPE_ON_DEV_NAME |
Device Name of UART Device for pipe UART |
CONFIG_UART_PL011 |
ARM PL011 UART Driver |
CONFIG_UART_PL011_PORT0 |
Enable driver for UART 0 |
CONFIG_UART_PL011_PORT1 |
Enable driver for UART 1 |
CONFIG_UART_PSOC6 |
PSoC6 MCU serial driver |
CONFIG_UART_PSOC6_UART_5 |
Enable PSOC6 SCB6 as UART_5 on Port 5 |
CONFIG_UART_PSOC6_UART_6 |
Enable PSOC6 SCB6 as UART_6 on Port 12 |
CONFIG_UART_QMSI |
QMSI UART driver |
CONFIG_UART_QMSI_0 |
Enable UART 0 controller |
CONFIG_UART_QMSI_0_HW_FC |
HW flow control for UART_0 controller |
CONFIG_UART_QMSI_0_IRQ_PRI |
|
CONFIG_UART_QMSI_1 |
Enable UART 1 controller |
CONFIG_UART_QMSI_1_HW_FC |
HW flow control for UART_1 controller |
CONFIG_UART_QMSI_1_IRQ_PRI |
|
CONFIG_UART_RV32M1_LPUART |
RV32M1 LPUART driver |
CONFIG_UART_RV32M1_LPUART_0 |
UART 0 |
CONFIG_UART_RV32M1_LPUART_1 |
UART 1 |
CONFIG_UART_RV32M1_LPUART_2 |
UART 2 |
CONFIG_UART_RV32M1_LPUART_3 |
UART 3 |
CONFIG_UART_SAM |
Atmel SAM MCU family UART driver |
CONFIG_UART_SAM0 |
Atmel SAM0 series SERCOM USART driver |
CONFIG_UART_SAM_PORT_0 |
Enable UART0 |
CONFIG_UART_SAM_PORT_1 |
Enable UART1 |
CONFIG_UART_SAM_PORT_1_PIN_TX_PA4 |
PA4 |
CONFIG_UART_SAM_PORT_1_PIN_TX_PA6 |
PA6 |
CONFIG_UART_SAM_PORT_1_PIN_TX_PD26 |
PD26 |
CONFIG_UART_SAM_PORT_2 |
Enable UART2 |
CONFIG_UART_SAM_PORT_3 |
Enable UART3 |
CONFIG_UART_SAM_PORT_3_PIN_TX_PD30 |
PD30 |
CONFIG_UART_SAM_PORT_3_PIN_TX_PD31 |
PD31 |
CONFIG_UART_SAM_PORT_4 |
Enable UART4 |
CONFIG_UART_SAM_PORT_4_PIN_TX_PD19 |
PD19 |
CONFIG_UART_SAM_PORT_4_PIN_TX_PD3 |
PD3 |
CONFIG_UART_SHELL_ON_DEV_NAME |
Device Name of UART Device for SHELL_BACKEND_SERIAL |
CONFIG_UART_SIFIVE |
SiFive Freedom serial driver |
CONFIG_UART_SIFIVE_PORT_0 |
Enable SIFIVE Port 0 |
CONFIG_UART_SIFIVE_PORT_0_IRQ_PRIORITY |
Port 0 Interrupt Priority |
CONFIG_UART_SIFIVE_PORT_0_RXCNT_IRQ |
Port 0 RX Interrupt Threshold Count |
CONFIG_UART_SIFIVE_PORT_0_TXCNT_IRQ |
Port 0 TX Interrupt Threshold Count |
CONFIG_UART_SIFIVE_PORT_1 |
Enable SIFIVE Port 1 |
CONFIG_UART_SIFIVE_PORT_1_IRQ_PRIORITY |
Port 1 Interrupt Priority |
CONFIG_UART_SIFIVE_PORT_1_RXCNT_IRQ |
Port 0 RX Interrupt Threshold Count |
CONFIG_UART_SIFIVE_PORT_1_TXCNT_IRQ |
Port 1 TX Interrupt Threshold Count |
CONFIG_UART_STELLARIS |
Stellaris serial driver |
CONFIG_UART_STELLARIS_PORT_0 |
Enable Stellaris UART Port 0 |
CONFIG_UART_STELLARIS_PORT_1 |
Enable Stellaris UART Port 1 |
CONFIG_UART_STELLARIS_PORT_2 |
Enable Stellaris UART Port 2 |
CONFIG_UART_STM32 |
STM32 MCU serial driver |
CONFIG_USART_MCUX_LPC |
MCUX USART driver |
CONFIG_USART_MCUX_LPC_0 |
USART 0 |
CONFIG_USART_SAM |
Atmel SAM MCU family USART driver |
CONFIG_USART_SAM_PORT_0 |
Enable USART0 |
CONFIG_USART_SAM_PORT_1 |
Enable USART1 |
CONFIG_USART_SAM_PORT_2 |
Enable USART2 |
CONFIG_USB |
USB |
CONFIG_USB_CDC_ACM |
USB CDC ACM Device Class Driver |
CONFIG_USB_CDC_ACM_LOG_LEVEL |
|
CONFIG_USB_CDC_ACM_LOG_LEVEL_DBG |
Debug |
CONFIG_USB_CDC_ACM_LOG_LEVEL_ERR |
Error |
CONFIG_USB_CDC_ACM_LOG_LEVEL_INF |
Info |
CONFIG_USB_CDC_ACM_LOG_LEVEL_OFF |
Off |
CONFIG_USB_CDC_ACM_LOG_LEVEL_WRN |
Warning |
CONFIG_USB_CDC_ACM_RINGBUF_SIZE |
USB CDC ACM ring buffer size |
CONFIG_USB_COMPOSITE_BUFFER_SIZE |
Set buffer size for Class Handler |
CONFIG_USB_COMPOSITE_DEVICE |
Enable composite device driver |
CONFIG_USB_DC_SAM |
SAM series USB HS Device Controller driver |
CONFIG_USB_DC_SAM0 |
SAM0 series USB Device Controller driver |
CONFIG_USB_DC_STM32 |
USB device controller driver for STM32 devices |
CONFIG_USB_DC_STM32_DISCONN_ENABLE |
|
CONFIG_USB_DEVICE_BLUETOOTH |
USB Bluetooth Device Class Driver |
CONFIG_USB_DEVICE_BOS |
Enable USB Binary Device Object Store (BOS) |
CONFIG_USB_DEVICE_DRIVER |
|
CONFIG_USB_DEVICE_HID |
USB Human Interface Device support |
CONFIG_USB_DEVICE_LOG_LEVEL |
|
CONFIG_USB_DEVICE_LOG_LEVEL_DBG |
Debug |
CONFIG_USB_DEVICE_LOG_LEVEL_ERR |
Error |
CONFIG_USB_DEVICE_LOG_LEVEL_INF |
Info |
CONFIG_USB_DEVICE_LOG_LEVEL_OFF |
Off |
CONFIG_USB_DEVICE_LOG_LEVEL_WRN |
Warning |
CONFIG_USB_DEVICE_LOOPBACK |
USB Loopback Function Driver |
CONFIG_USB_DEVICE_MANUFACTURER |
USB manufacturer name |
CONFIG_USB_DEVICE_NETWORK |
|
CONFIG_USB_DEVICE_NETWORK_ECM |
USB Ethernet Control Model (ECM) Networking device |
CONFIG_USB_DEVICE_NETWORK_ECM_MAC |
|
CONFIG_USB_DEVICE_NETWORK_EEM |
USB Ethernet Emulation Model (EEM) Networking device |
CONFIG_USB_DEVICE_NETWORK_LOG_LEVEL |
|
CONFIG_USB_DEVICE_NETWORK_LOG_LEVEL_DBG |
Debug |
CONFIG_USB_DEVICE_NETWORK_LOG_LEVEL_DEFAULT |
Default |
CONFIG_USB_DEVICE_NETWORK_LOG_LEVEL_ERR |
Error |
CONFIG_USB_DEVICE_NETWORK_LOG_LEVEL_INF |
Info |
CONFIG_USB_DEVICE_NETWORK_LOG_LEVEL_OFF |
Off |
CONFIG_USB_DEVICE_NETWORK_LOG_LEVEL_WRN |
Warning |
CONFIG_USB_DEVICE_NETWORK_RNDIS |
USB Remote NDIS (RNDIS) Networking device |
CONFIG_USB_DEVICE_OS_DESC |
Enable MS OS Descriptors support |
CONFIG_USB_DEVICE_PID |
USB Product ID |
CONFIG_USB_DEVICE_PRODUCT |
USB product name |
CONFIG_USB_DEVICE_REMOTE_WAKEUP |
Enable support for remote wakeup |
CONFIG_USB_DEVICE_SN |
USB serial number |
CONFIG_USB_DEVICE_SOF |
Enable Start of Frame processing in events |
CONFIG_USB_DEVICE_STACK |
USB device stack |
CONFIG_USB_DEVICE_VID |
USB Vendor ID |
CONFIG_USB_DFU_CLASS |
USB DFU Class Driver |
CONFIG_USB_DFU_DEFAULT_POLLTIMEOUT |
Default value for bwPollTimeout |
CONFIG_USB_DFU_DETACH_TIMEOUT |
|
CONFIG_USB_DFU_MAX_XFER_SIZE |
|
CONFIG_USB_DFU_WAIT_DELAY_MS |
|
CONFIG_USB_DRIVER_LOG_LEVEL |
|
CONFIG_USB_DRIVER_LOG_LEVEL_DBG |
Debug |
CONFIG_USB_DRIVER_LOG_LEVEL_ERR |
Error |
CONFIG_USB_DRIVER_LOG_LEVEL_INF |
Info |
CONFIG_USB_DRIVER_LOG_LEVEL_OFF |
Off |
CONFIG_USB_DRIVER_LOG_LEVEL_WRN |
Warning |
CONFIG_USB_DW |
Designware USB Device Controller Driver |
CONFIG_USB_DW_IRQ_PRI |
DesignWare USB Driver Interrupt priority |
CONFIG_USB_DW_USB_2_0 |
DesignWare Controller and PHY support for USB specification 2.0 |
CONFIG_USB_HID_BOOT_PROTOCOL |
Enable USB HID Boot Protocol handling |
CONFIG_USB_HID_DEVICE_1 |
Enable second USB HID Device |
CONFIG_USB_HID_DEVICE_NAME_0 |
USB HID first device name |
CONFIG_USB_HID_DEVICE_NAME_1 |
USB HID second device name |
CONFIG_USB_HID_MAX_PAYLOAD_SIZE |
|
CONFIG_USB_HID_POLL_INTERVAL_MS |
Polling interval |
CONFIG_USB_HID_PROTOCOL_CODE |
HID protocol code |
CONFIG_USB_HID_REPORTS |
HID reports in the instance |
CONFIG_USB_KINETIS |
Kinetis USB Device Controller Driver |
CONFIG_USB_MASS_STORAGE |
USB Mass Storage Device Class Driver |
CONFIG_USB_MASS_STORAGE_LOG_LEVEL |
|
CONFIG_USB_MASS_STORAGE_LOG_LEVEL_DBG |
Debug |
CONFIG_USB_MASS_STORAGE_LOG_LEVEL_ERR |
Error |
CONFIG_USB_MASS_STORAGE_LOG_LEVEL_INF |
Info |
CONFIG_USB_MASS_STORAGE_LOG_LEVEL_OFF |
Off |
CONFIG_USB_MASS_STORAGE_LOG_LEVEL_WRN |
Warning |
CONFIG_USB_NATIVE_POSIX |
Native Posix USB Device Controller Driver |
CONFIG_USB_NRF52840 |
Nordic Semiconductor nRF52840 USB Device Controller Driver |
CONFIG_USB_NRFX_EVT_QUEUE_SIZE |
USBD event queue size |
CONFIG_USB_UART_CONSOLE |
Use USB port for console outputs |
CONFIG_USB_UART_DTR_WAIT |
Wait on DTR control signal |
CONFIG_USB_VBUS_GPIO |
Control VBUS via GPIO pin |
CONFIG_USB_VBUS_GPIO_DEV_NAME |
GPIO Device |
CONFIG_USB_VBUS_GPIO_PIN_NUM |
GPIO pin number |
CONFIG_USERSPACE |
User mode threads |
CONFIG_USE_CODE_PARTITION |
link into code-partition |
CONFIG_USE_SEGGER_RTT |
Enable SEGGER RTT libraries. |
CONFIG_USE_STM32_HAL_ADC |
|
CONFIG_USE_STM32_HAL_ADC_EX |
|
CONFIG_USE_STM32_HAL_CAN |
|
CONFIG_USE_STM32_HAL_CEC |
|
CONFIG_USE_STM32_HAL_COMP |
|
CONFIG_USE_STM32_HAL_CORTEX |
|
CONFIG_USE_STM32_HAL_CRC |
|
CONFIG_USE_STM32_HAL_CRC_EX |
|
CONFIG_USE_STM32_HAL_CRYPT |
|
CONFIG_USE_STM32_HAL_CRYPT_EX |
|
CONFIG_USE_STM32_HAL_DAC |
|
CONFIG_USE_STM32_HAL_DAC_EX |
|
CONFIG_USE_STM32_HAL_DCMI |
|
CONFIG_USE_STM32_HAL_DCMI_EX |
|
CONFIG_USE_STM32_HAL_DFSDM |
|
CONFIG_USE_STM32_HAL_DFSDM_EX |
|
CONFIG_USE_STM32_HAL_DMA |
|
CONFIG_USE_STM32_HAL_DMA2D |
|
CONFIG_USE_STM32_HAL_DMA_EX |
|
CONFIG_USE_STM32_HAL_DSI |
|
CONFIG_USE_STM32_HAL_ETH |
|
CONFIG_USE_STM32_HAL_FIREWALL |
|
CONFIG_USE_STM32_HAL_FLASH |
|
CONFIG_USE_STM32_HAL_FLASH_EX |
|
CONFIG_USE_STM32_HAL_FLASH_RAMFUNC |
|
CONFIG_USE_STM32_HAL_FMPI2C |
|
CONFIG_USE_STM32_HAL_FMPI2C_EX |
|
CONFIG_USE_STM32_HAL_GFXMMU |
|
CONFIG_USE_STM32_HAL_GPIO |
|
CONFIG_USE_STM32_HAL_GPIO_EX |
|
CONFIG_USE_STM32_HAL_HASH |
|
CONFIG_USE_STM32_HAL_HASH_EX |
|
CONFIG_USE_STM32_HAL_HCD |
|
CONFIG_USE_STM32_HAL_HRTIM |
|
CONFIG_USE_STM32_HAL_I2C |
|
CONFIG_USE_STM32_HAL_I2C_EX |
|
CONFIG_USE_STM32_HAL_I2S |
|
CONFIG_USE_STM32_HAL_I2S_EX |
|
CONFIG_USE_STM32_HAL_IRDA |
|
CONFIG_USE_STM32_HAL_IWDG |
|
CONFIG_USE_STM32_HAL_JPEG |
|
CONFIG_USE_STM32_HAL_LCD |
|
CONFIG_USE_STM32_HAL_LPTIM |
|
CONFIG_USE_STM32_HAL_LTDC |
|
CONFIG_USE_STM32_HAL_LTDC_EX |
|
CONFIG_USE_STM32_HAL_MDIOS |
|
CONFIG_USE_STM32_HAL_MMC |
|
CONFIG_USE_STM32_HAL_NAND |
|
CONFIG_USE_STM32_HAL_NOR |
|
CONFIG_USE_STM32_HAL_OPAMP |
|
CONFIG_USE_STM32_HAL_OPAMP_EX |
|
CONFIG_USE_STM32_HAL_OSPI |
|
CONFIG_USE_STM32_HAL_PCCARD |
|
CONFIG_USE_STM32_HAL_PCD |
|
CONFIG_USE_STM32_HAL_PCD_EX |
|
CONFIG_USE_STM32_HAL_PWR |
|
CONFIG_USE_STM32_HAL_PWR_EX |
|
CONFIG_USE_STM32_HAL_QSPI |
|
CONFIG_USE_STM32_HAL_RCC |
|
CONFIG_USE_STM32_HAL_RCC_EX |
|
CONFIG_USE_STM32_HAL_RNG |
|
CONFIG_USE_STM32_HAL_RTC |
|
CONFIG_USE_STM32_HAL_RTC_EX |
|
CONFIG_USE_STM32_HAL_SAI |
|
CONFIG_USE_STM32_HAL_SAI_EX |
|
CONFIG_USE_STM32_HAL_SD |
|
CONFIG_USE_STM32_HAL_SDADC |
|
CONFIG_USE_STM32_HAL_SDRAM |
|
CONFIG_USE_STM32_HAL_SD_EX |
|
CONFIG_USE_STM32_HAL_SMARTCARD |
|
CONFIG_USE_STM32_HAL_SMARTCARD_EX |
|
CONFIG_USE_STM32_HAL_SMBUS |
|
CONFIG_USE_STM32_HAL_SPDIFRX |
|
CONFIG_USE_STM32_HAL_SPI |
|
CONFIG_USE_STM32_HAL_SPI_EX |
|
CONFIG_USE_STM32_HAL_SRAM |
|
CONFIG_USE_STM32_HAL_SWPMI |
|
CONFIG_USE_STM32_HAL_TIM |
|
CONFIG_USE_STM32_HAL_TIME_EX |
|
CONFIG_USE_STM32_HAL_TIM_EX |
|
CONFIG_USE_STM32_HAL_TSC |
|
CONFIG_USE_STM32_HAL_UART |
|
CONFIG_USE_STM32_HAL_UART_EX |
|
CONFIG_USE_STM32_HAL_USART |
|
CONFIG_USE_STM32_HAL_USART_EX |
|
CONFIG_USE_STM32_HAL_WWDG |
|
CONFIG_USE_STM32_LL_ADC |
|
CONFIG_USE_STM32_LL_COMP |
|
CONFIG_USE_STM32_LL_CRC |
|
CONFIG_USE_STM32_LL_CRS |
|
CONFIG_USE_STM32_LL_DAC |
|
CONFIG_USE_STM32_LL_DMA |
|
CONFIG_USE_STM32_LL_DMA2D |
|
CONFIG_USE_STM32_LL_EXTI |
|
CONFIG_USE_STM32_LL_FMC |
|
CONFIG_USE_STM32_LL_FSMC |
|
CONFIG_USE_STM32_LL_GPIO |
|
CONFIG_USE_STM32_LL_HRTIM |
|
CONFIG_USE_STM32_LL_I2C |
|
CONFIG_USE_STM32_LL_LPTIM |
|
CONFIG_USE_STM32_LL_LPUART |
|
CONFIG_USE_STM32_LL_OPAMP |
|
CONFIG_USE_STM32_LL_PWR |
|
CONFIG_USE_STM32_LL_RCC |
|
CONFIG_USE_STM32_LL_RNG |
|
CONFIG_USE_STM32_LL_RTC |
|
CONFIG_USE_STM32_LL_SDMMC |
|
CONFIG_USE_STM32_LL_SPI |
|
CONFIG_USE_STM32_LL_SWPMI |
|
CONFIG_USE_STM32_LL_TIM |
|
CONFIG_USE_STM32_LL_USART |
|
CONFIG_USE_STM32_LL_USB |
|
CONFIG_USE_STM32_LL_UTILS |
|
CONFIG_USE_SWITCH |
Use new-style _arch_switch instead of __swap |
CONFIG_USE_SWITCH_SUPPORTED |
|
CONFIG_VEGA_SDK_HAL |
RV32M1 VEGA SDK support |
CONFIG_VL53L0X |
VL53L0X time of flight sensor |
CONFIG_VL53L0X_PROXIMITY_THRESHOLD |
Proximity threshold in millimeters |
CONFIG_VL53L0X_XSHUT_CONTROL_ENABLE |
Enable XSHUT pin control |
CONFIG_VL53L0X_XSHUT_GPIO_DEV_NAME |
GPIO device |
CONFIG_VL53L0X_XSHUT_GPIO_PIN_NUM |
Interrupt GPIO pin number |
CONFIG_WAITQ_DUMB |
Simple linked-list wait_q |
CONFIG_WAITQ_SCALABLE |
Use scalable wait_q implementation |
CONFIG_WATCHDOG |
Watchdog Support |
CONFIG_WDOG_CMSDK_APB |
CMSDK APB Watchdog Driver for ARM family of MCUs |
CONFIG_WDOG_CMSDK_APB_START_AT_BOOT |
Start Watchdog during boot |
CONFIG_WDOG_INIT |
|
CONFIG_WDT_0_NAME |
Watchdog driver instance name |
CONFIG_WDT_DISABLE_AT_BOOT |
Disable at boot |
CONFIG_WDT_ESP32 |
ESP32 Watchdog (WDT) Driver |
CONFIG_WDT_ESP32_IRQ |
IRQ line for watchdog interrupt |
CONFIG_WDT_LOG_LEVEL |
|
CONFIG_WDT_LOG_LEVEL_DBG |
Debug |
CONFIG_WDT_LOG_LEVEL_ERR |
Error |
CONFIG_WDT_LOG_LEVEL_INF |
Info |
CONFIG_WDT_LOG_LEVEL_OFF |
Off |
CONFIG_WDT_LOG_LEVEL_WRN |
Warning |
CONFIG_WDT_MCUX_WDOG |
MCUX WDOG driver |
CONFIG_WDT_MULTISTAGE |
Enable multistage timeouts |
CONFIG_WDT_NRFX |
nRF WDT nrfx driver |
CONFIG_WDT_QMSI |
QMSI Watchdog driver |
CONFIG_WDT_QMSI_API_REENTRANCY |
WDT shim driver API reentrancy |
CONFIG_WDT_SAM |
Atmel SAM MCU Family Watchdog (WDT) Driver |
CONFIG_WDT_SAM0 |
Atmel SAM0 series Watchdog (WDT) Driver |
CONFIG_WIFI |
add support for WiFi Drivers |
CONFIG_WIFI_ESWIFI |
Inventek eS-WiFi support |
CONFIG_WIFI_ESWIFI_NAME |
Driver name |
CONFIG_WIFI_ESWIFI_THREAD_PRIO |
esWiFi threads priority |
CONFIG_WIFI_INIT_PRIORITY |
WiFi driver init priority |
CONFIG_WIFI_LOG_LEVEL |
|
CONFIG_WIFI_LOG_LEVEL_DBG |
Debug |
CONFIG_WIFI_LOG_LEVEL_DEFAULT |
Default |
CONFIG_WIFI_LOG_LEVEL_ERR |
Error |
CONFIG_WIFI_LOG_LEVEL_INF |
Info |
CONFIG_WIFI_LOG_LEVEL_OFF |
Off |
CONFIG_WIFI_LOG_LEVEL_WRN |
Warning |
CONFIG_WIFI_OFFLOAD |
Support offloaded WiFi device drivers |
CONFIG_WIFI_SIMPLELINK |
SimpleLink WiFi driver support |
CONFIG_WIFI_SIMPLELINK_FAST_CONNECT_TIMEOUT |
Time (in seconds) to wait for fast connect on startup |
CONFIG_WIFI_SIMPLELINK_MAX_PACKET_SIZE |
Maximum size of a packet, in bytes |
CONFIG_WIFI_SIMPLELINK_MAX_SCAN_RETRIES |
Number of retries to get network scan table |
CONFIG_WIFI_SIMPLELINK_NAME |
Driver name |
CONFIG_WIFI_SIMPLELINK_SCAN_COUNT |
Number of entries in network scan table: Max: 30 |
CONFIG_WIFI_WINC1500 |
WINC1500 driver support |
CONFIG_WIFI_WINC1500_BUF_CTR |
Number of buffer per-buffer pool |
CONFIG_WIFI_WINC1500_GPIO_SPI_CS |
Manage SPI CS through a GPIO pin |
CONFIG_WIFI_WINC1500_MAX_PACKET_SIZE |
Maximum size of a packet, in bytes |
CONFIG_WIFI_WINC1500_NAME |
Driver name |
CONFIG_WIFI_WINC1500_OFFLOAD_MAX_SOCKETS |
Maximum number of sockets that can be managed |
CONFIG_WIFI_WINC1500_REGION_ASIA |
Region Asia |
CONFIG_WIFI_WINC1500_REGION_EUROPE |
Region Europe |
CONFIG_WIFI_WINC1500_REGION_NORTH_AMERICA |
Region North America |
CONFIG_WIFI_WINC1500_THREAD_PRIO |
HAL callback handler thread priority |
CONFIG_WIFI_WINC1500_THREAD_STACK_SIZE |
HAL callback handler thread stack size |
CONFIG_WS2812B_SW |
Enable WS2812B software-based LED strip driver |
CONFIG_WS2812B_SW_GPIO_NAME |
GPIO port that the LED strip is connected to |
CONFIG_WS2812B_SW_GPIO_PIN |
GPIO pin that the LED strip is connected to |
CONFIG_WS2812B_SW_NAME |
Driver name |
CONFIG_WS2812_BLU_ORDER |
Order in which a blue pixel should be shifted out |
CONFIG_WS2812_GRN_ORDER |
Order in which a green pixel should be shifted out |
CONFIG_WS2812_HAS_WHITE_CHANNEL |
Does the chip have a white channel on wire? |
CONFIG_WS2812_RED_ORDER |
Order in which a red pixel should be shifted out |
CONFIG_WS2812_STRIP |
Enable WS2812 (and compatible) LED strip driver |
CONFIG_WS2812_STRIP_MAX_PIXELS |
Maximum number of pixels in a strip |
CONFIG_WS2812_STRIP_ONE_FRAME |
SPI frame to shift out to signal a one bit |
CONFIG_WS2812_STRIP_ZERO_FRAME |
SPI frame to shift out to signal a zero bit |
CONFIG_WS2812_WHT_ORDER |
Order in which a white pixel should be shifted out |
CONFIG_X86 |
x86 architecture |
CONFIG_X86_64 |
x86_64 architecture |
CONFIG_X86_BOUNDS_CHECK_BYPASS_MITIGATION |
|
CONFIG_X86_DYNAMIC_IRQ_STUBS |
Number of dynamic interrupt stubs |
CONFIG_X86_ENABLE_TSS |
|
CONFIG_X86_FIXED_IRQ_MAPPING |
|
CONFIG_X86_IAMCU |
IAMCU calling convention |
CONFIG_X86_KERNEL_OOPS |
Enable handling of kernel oops as an exception |
CONFIG_X86_KERNEL_OOPS_VECTOR |
IDT vector to use for kernel oops |
CONFIG_X86_KPTI |
Enable kernel page table isolation |
CONFIG_X86_MMU |
Enable Memory Management Unit |
CONFIG_X86_NO_LAZY_FP |
|
CONFIG_X86_NO_MELTDOWN |
|
CONFIG_X86_NO_SPECTRE_V1 |
|
CONFIG_X86_NO_SPECTRE_V2 |
|
CONFIG_X86_NO_SPECTRE_V4 |
|
CONFIG_X86_NO_SPECULATIVE_VULNERABILITIES |
|
CONFIG_X86_RETPOLINE |
Build with retpolines enabled in x86 assembly code |
CONFIG_X86_STACK_PROTECTION |
|
CONFIG_X86_TSC_RANDOM_GENERATOR |
x86 timestamp counter based number generator |
CONFIG_X86_USERSPACE |
|
CONFIG_XIP |
Execute in place |
CONFIG_XOROSHIRO_RANDOM_GENERATOR |
Use Xoroshiro128+ as PRNG |
CONFIG_XTENSA |
Xtensa architecture |
CONFIG_XTENSA_ASM2 |
New-style Xtensa context switch & interrupt layer |
CONFIG_XTENSA_CONSOLE_INIT_PRIORITY |
Init priority |
CONFIG_XTENSA_KERNEL_CPU_PTR_SR |
|
CONFIG_XTENSA_NO_IPC |
Core has no IPC support |
CONFIG_XTENSA_OMIT_HIGH_INTERRUPTS |
Skip generation of vectors for high priority interrupts |
CONFIG_XTENSA_RESET_VECTOR |
Build reset vector code |
CONFIG_XTENSA_SIM_CONSOLE |
Use Xtensa simulator console |
CONFIG_XTENSA_TIMER |
Xtensa timer support |
CONFIG_XTENSA_TIMER_ID |
System timer CCOMPAREn register index |
CONFIG_XTENSA_USE_CORE_CRT1 |
Use crt1.S from core |
CONFIG_XTENSA_XTSC_INC |
Xtensa XTSC extension include file |
CONFIG_XUK_APIC_TSC_SHIFT |
Power-of-two divisor between TSC and APIC timer |
CONFIG_XUK_DEBUG |
Debug logging at lowest level |
CONFIG_ZERO_LATENCY_IRQS |
Enable zero-latency interrupts |
CONFIG_ZTEST |
Zephyr testing framework |
CONFIG_ZTEST_ASSERT_VERBOSE |
Assertion verbosity level |
CONFIG_ZTEST_FAIL_FAST |
Abort on first failing test |
CONFIG_ZTEST_MOCKING |
Mocking support functions |
CONFIG_ZTEST_PARAMETER_COUNT |
Count of parameters or return values reserved |
CONFIG_ZTEST_STACKSIZE |
Test function thread stack size |