DVP FPC-24 MT9M114 Camera Module
Overview
This shield supports mt9m114 camera modules which use a 24-pin FPC connector and a DVP (Digital Video Port), aka parallel interface. These camera modules are compatible and provided together with the i.MX RT1050, RT1060 and RT1064 EVKs as specified here Camera iMXRT [1].
Pins assignment of the DVP FPC-24 MT9M114 camera module
FPC Connector Pin |
Function |
|---|---|
1 |
NC |
2 |
AGND |
3 |
SDA |
4 |
AVDD |
5 |
SCL |
6 |
Reset |
7 |
Vsync |
8 |
Powerdown |
9 |
Hsync |
10 |
DVDD |
11 |
DOVDD |
12 |
Data 9 |
13 |
Master Clock |
14 |
Data 8 |
15 |
DGND |
16 |
Data 7 |
17 |
Pixel Clock |
18 |
Data 6 |
19 |
Data 2 |
20 |
Data 5 |
21 |
Data 3 |
22 |
Data 4 |
23 |
Data 1 |
24 |
Data 0 |
Requirements
This shield can only be used with a board which provides a configuration for a 24-pins FPC connector with DVP (parallel) interface, such as the i.MX RT1050, RT1060, RT1064 EVKs.
Programming
Set --shield dvp_fpc24_mt9m114 when you invoke west build. For example:
# From the root of the zephyr repository
west build -b mimxrt1064_evk --shield dvp_fpc24_mt9m114 samples/subsys/video/capture