Generic ST7735R Display Shield
Overview
This is a generic shield for display shields based on ST7735R display controller. More information about the controller can be found in ST7735R Datasheet [1].
Pins Assignment of the Generic ST7735R Display Shield
Arduino Connector Pin |
Function |
|
|---|---|---|
D8 |
ST7735R Reset |
|
D9 |
ST7735R DC |
(Data/Command) |
D10 |
SPI SS |
(Serial Slave Select) |
D11 |
SPI MOSI |
(Serial Data Input) |
D12 |
SPI MISO |
(Serial Data Out) |
D13 |
SPI SCK |
(Serial Clock Input) |
Current supported displays
Display |
Shield Designation |
|---|---|
adafruit 160x128 18bit TFT |
st7735r_ada_160x128 |
Requirements
This shield can only be used with a board that provides a configuration for Arduino connectors and defines node aliases for SPI and GPIO interfaces (see Shields for more details).
Programming
Set --shield st7735r_ada_160x128 when you invoke west build. For example:
# From the root of the zephyr repository
west build -b nrf52840dk/nrf52840 --shield st7735r_ada_160x128 samples/subsys/display/lvgl