Semtech SX1262MB2DAS LoRa Shield
Overview
The Semtech SX1262MB2DAS LoRa shield is an Arduino compatible shield based on the SX1262 LoRa transceiver from Semtech.
More information about the shield can be found at the mbed SX1262MB2xAS website [1].
Pins Assignment of the Semtech SX1262MB2DAS LoRa Shield
Shield Connector Pin |
Function |
|---|---|
A0 |
SX1262 RESET |
D3 |
SX1262 BUSY |
D5 |
SX1262 DIO1 |
D7 |
SX1262 SPI NSS |
D8 |
SX1262 ANT SW |
D11 |
SX1262 SPI MOSI |
D12 |
SX1262 SPI MISO |
D13 |
SX1262 SPI SCK |
The SX1262 signals DIO2 and DIO3 are not available at the shield connector.
Requirements
This shield can only be used with a board which provides a configuration for Arduino connectors (see Shields for more details).
Programming
Set --shield semtech_sx1262mb2das when you invoke west build. For
example:
# From the root of the zephyr repository
west build -b nucleo_f429zi --shield semtech_sx1262mb2das samples/subsys/lorawan/class_a