The latest development version of this page may be more current than this released 3.7.0 version.

NXP FRDM-CR20A

Overview

The Freedom development board platform supports the MCR20A 2.4GHZ wireless transceiver. The FRDM-CR20A evaluation board is a small, low-power, cost-effective reference design for the MCR20A transceiver in a shield form factor, compatible with existing Freedom development platforms, such as NXP FRDM-K64F.

Hardware

• MCR20AVHM

  • Low-power

  • High-performance 2.4 GHz IEEE 802.15.4 compliant transceiver

• Connectivity

  • PCB inverted F-type antenna and SMA RF port

  • Arduino compatible

• Power Management

  • Programmable output power -32 dBm to +8 dBm at the SMA connector, no trap

  • Receiver sensitivity: –102 dBm, typical

• Components

  • Minimum number of matching components and external balun

  • 1 RGB LED indicator

  • 2 pushbutton switches

For more information about the MCR20A SoC and FRDM-CR20A board:

• MCR20A Website

• MCR20A Datasheet

• MCR20A Reference Manual

• FRDM-CR20A Website

• FRDM-CR20A User Guide

• FRDM-CR20A Schematics

Programming

Set --shield frdm_cr20a when you invoke west build. For example:

# From the root of the zephyr repository
west build -b frdm_k64f --shield frdm_cr20a samples/net/wpanusb