SSD1306 128x64(/32) pixels generic shield
Overview
This is a generic shield for 128x64(/32) pixel resolution OLED displays based on SSD1306 controller. These displays have an I2C interface and usually only four pins: GND, VCC, SCL and SDA. Display pins can be connected to the pin header of a board using jumper wires.
Current supported displays
Display |
Controller / Driver |
Shield Designation |
|---|---|---|
No Name 128x64 pixel |
SSD1306 / ssd1306 |
ssd1306_128x64 |
No Name 128x32 pixel |
SSD1306 / ssd1306 |
ssd1306_128x32 |
No Name 128x64 pixel |
SH1106 / ssd1306 |
sh1106_128x64 |
Requirements
This shield can only be used with a board which provides a configuration for Arduino connectors and defines a node alias for the I2C interface (see Shields for more details).
Programming
Set --shield ssd1306_128x64 when you invoke west build. For example:
# From the root of the zephyr repository
west build -b frdm_k64f --shield ssd1306_128x64 samples/subsys/display/lvgl