LP5569 9-channel LED controller

Browse source code on GitHub

Overview

This sample controls 9 LEDs connected to an LP5569 driver. The sample turns all LEDs on one by one with a 1 second delay between each. Then it fades all LEDs until they are off again. Afterwards, it turns them all on at once, waits a second, and turns them all back off. This pattern then repeats indefinitely.

Building and Running

Build the application for the nRF52840 DK board, and connect a LP5569 LED controller on the bus I2C0 at the address 0x32.

west build -b nrf52840dk/nrf52840 samples/drivers/led/lp5569

For flashing the application, refer to the Flashing section of the nRF52840 DK board documentation.

*** Booting Zephyr OS build zephyr-v3.3.0 ***
[00:00:00.361,694] <inf> app: Found LED device lp5569@32
[00:00:00.361,694] <inf> app: Testing 9 LEDs ..

References

See also

LED Interface