Eddystone
Overview
Application demonstrating Eddystone Configuration Service
The Eddystone Configuration Service runs as a GATT service on the beacon while it is connectable and allows configuration of the advertised data, the broadcast power levels, and the advertising intervals. It also forms part of the definition of how Eddystone-EID beacons are configured and registered with a trusted resolver.
Requirements
BlueZ running on the host, or
A board with Bluetooth LE support
Building and Running
Build and flash the sample as follows, replacing <board> with your target board:
west build -b <board> samples/bluetooth/eddystone
west flash
After flashing, the device starts advertising as a connectable Eddystone beacon. Use an Eddystone Configuration Service compatible app (e.g. nRF Connect) to connect and configure the advertised data, broadcast power levels, and advertising intervals.