EFR32xG22E 2.4 GHz 6 dBm (xG22-RB4415A)
Overview
The EFR32xG22E +6 dBm Radio Board is a QFN40 radio board for the EFR32MG22E Wireless SoC. It is available standalone as xG22-RB4415A (BRD4415A).
The radio board plugs into the Wireless Pro Kit Mainboard BRD4002A and is supported in Zephyr as one of several Radio Boards.
Hardware
EFR32MG22E224F512IM40 Mighty Gecko SoC
CPU core: ARM Cortex®-M33 with FPU
Flash memory: 512 kB
RAM: 32 kB
Transmit power: up to +6 dBm
Operation frequency: 2.4 GHz
Inverted-F PCB antenna
8 Mbit SPI NOR flash
Crystals for LFXO (32.768 kHz) and HFXO (38.4 MHz)
For more information about the EFR32MG22E SoC and BRD4415A board, refer to these documents:
Supported Features
The xg22_rb4415a board supports the hardware features listed below.
- on-chip / on-board
- Feature integrated in the SoC / present on the board.
- 2 / 2
-
Number of instances that are enabled / disabled.
Click on the label to see the first instance of this feature in the board/SoC DTS files. -
vnd,foo -
Compatible string for the Devicetree binding matching the feature.
Click on the link to view the binding documentation.
xg22_rb4415a/efr32mg22e224f512im40 target
On-target memory for this board target: 32 KiB of RAM, 512 KiB of Flash.
Type |
Location |
Description |
Compatible |
|---|---|---|---|
CPU |
on-chip |
ARM Cortex-M33 CPU1 |
|
ADC |
on-chip |
Silicon Labs Series 2 IADC1 |
|
Bluetooth |
on-chip |
Silicon Labs Series 2 Bluetooth HCI1 |
|
Clock control |
on-chip |
Silicon Labs Series 2 CMU1 |
|
on-chip |
Silicon Labs Series 2 HFXO1 |
||
on-chip |
Silicon Labs Series 2 HFRCODPLL1 |
||
on-chip |
Generic fixed-rate clock provider3 |
||
on-chip |
Silicon Labs Series 2 LFXO1 |
||
on-chip |
Silicon Labs Series 2 LFRCO1 |
||
on-chip |
Generic fixed factor clock provider18 |
||
Counter |
on-chip |
||
on-chip |
Silicon Labs Series 2 BURTC1 |
||
on-chip |
Silicon Labs PROTIMER counter1 |
||
CRC |
on-chip |
Silabs General Purpose CRC1 |
|
Debug |
on-chip |
Silicon Labs Packet Trace Interface1 |
|
on-chip |
ARMv8 instrumentation trace macrocell1 |
||
Display |
on-board |
Sharp LS0XX memory display controller1 |
|
DMA |
on-chip |
Silicon Labs Series 2 LDMA1 |
|
Flash controller |
on-chip |
Silicon Labs Series 2 MSC1 |
|
GPIO & Headers |
on-chip |
Silicon Labs Series 2 GPIO Peripheral1 |
|
on-chip |
Silicon Labs Series 2 GPIO Port4 |
||
on-board |
Silicon Labs Kit Expansion Header1 |
||
I2C |
on-chip |
||
Input |
on-board |
Group of GPIO-bound input keys1 |
|
Interrupt controller |
on-chip |
ARMv8-M NVIC (Nested Vectored Interrupt Controller)1 |
|
LED |
on-board |
Group of GPIO-controlled LEDs1 |
|
on-board |
Group of PWM-controlled LEDs1 |
||
MMU / MPU |
on-chip |
ARMv8-M MPU (Memory Protection Unit)1 |
|
MTD |
on-chip |
Flash node1 |
|
on-board |
Properties supporting Zephyr spi-nor flash driver (over the Zephyr SPI API) control of serial flash memories using the standard M25P80-based command set1 |
||
Networking |
on-chip |
Silicon Labs Series 2 Radio Interface1 |
|
Pin control |
on-chip |
Silicon Labs Series 2 DBUS Pin Controller1 |
|
PWM |
on-chip |
||
on-chip |
Silicon Labs LETIMER PWM1 |
||
Regulator |
on-chip |
Silicon Labs Series 2 DC-DC converter1 |
|
on-board |
Fixed voltage regulators1 |
||
Retained memory |
on-chip |
Silicon Labs Series 2 BURAM1 |
|
RNG |
on-chip |
GECKO TRNG (True Random Number Generator)1 |
|
RTC |
on-chip |
Silicon Labs Series 2 RTCC1 |
|
Sensors |
on-board |
Silicon Labs Si7006/13/20/21 RHT Sensor1 |
|
Serial controller |
on-chip |
Silicon Labs Series 2 USART1 |
|
on-chip |
Silicon Labs Series 2 EUSART 1 |
||
SPI |
on-chip |
Silicon Labs Series 2 USART1 |
|
SRAM |
on-chip |
Generic on-chip SRAM1 |
|
Timer |
on-chip |
ARMv8-M System Tick1 |
|
on-chip |
|||
on-chip |
Silicon Labs LETIMER1 |
||
Watchdog |
on-chip |
Silicon Labs Series 0-2 WDOG1 |
System Clock
The EFR32MG22E SoC is configured to use the HFRCODPLL oscillator at 76.8 MHz as the system clock, locked to the 38.4 MHz external crystal oscillator on the board.
Serial Port
The EFR32MG22E SoC has two USARTs and one EUART. USART1 is connected to the board controller and is used for the console.
Programming and Debugging
The xg22_rb4415a board supports the runners and associated west commands listed below.
| flash | debug | rtt | debugserver | attach | reset | |
|---|---|---|---|---|---|---|
| jlink | ✅ (default) | ✅ (default) | ✅ | ✅ | ✅ | ✅ |
| silabs_commander | ✅ |
Flashing
Connect the BRD4002A board with a mounted BRD4415A radio board to your host computer using the USB port.
Here is an example for the Hello World application.
# From the root of the zephyr repository
west build -b xg22_rb4415a samples/hello_world
west flash
Open a serial terminal (minicom, putty, etc.) with the following settings:
Speed: 115200
Data: 8 bits
Parity: None
Stop bits: 1
Reset the board and you should see the following message in the terminal:
Hello World! xg22_rb4415a
Bluetooth
To use Bluetooth functionality, run the command below to retrieve necessary binary blobs from the Silicon Labs HAL repository.
west blobs fetch hal_silabs
Then build the Zephyr kernel and a Bluetooth sample with the following command. The Observer sample application is used in this example.
# From the root of the zephyr repository
west build -b xg22_rb4415a samples/bluetooth/observer