PSOC™ 4 HVMS 64K Lite Kit

Overview

The KIT_PSOC4-HVMS-64K_LITE is a lite kit based on the PSOC™ 4 HVMS 64K family, featuring a PSOC™ 4 HVMS 64K (CY8C4146LWE-HVS115X) microcontroller with an Arm® Cortex®-M0+ core running at up to 48 MHz.

Key features include 64 KB flash, 8 KB SRAM, and an onboard KitProg3 programmer/debugger with USB Micro-B connectivity.

Hardware

  • SoC: PSOC™ 4 HVMS 64K (CY8C4146LWE-HVS115X)

  • CPU: Arm® Cortex®-M0+ at 48 MHz

  • Flash: 64 KB

  • SRAM: 8 KB

  • Peripherals: SAR ADC, TCPWM, SCB (UART/SPI/I2C)

  • Debug: Onboard KitProg3 (SWD + UART bridge)

  • Power: USB powered via Micro-B connector

For more information about the PSOC™ 4 HVMS 64K and KIT_PSOC4-HVMS-64K_LITE:

Kit Contents

  • PSOC™ 4 HVMS 64K Lite kit board

  • USB-A to Micro-B cable

  • Quick start guide

Supported Features

The kit_psoc4_hvms_64k_lite board supports the hardware features listed below.

on-chip / on-board
Feature integrated in the SoC / present on the board.
2 / 2
Number of instances that are enabled / disabled.
Click on the label to see the first instance of this feature in the board/SoC DTS files.
vnd,foo
Compatible string for the Devicetree binding matching the feature.
Click on the link to view the binding documentation.

kit_psoc4_hvms_64k_lite/cy8c4146lwe_hvs115x target

On-target memory for this board target: 8 KiB of RAM, 64 KiB of Flash.

Type

Location

Description

Compatible

CPU

on-chip

ARM Cortex-M0+ CPU1

arm,cortex-m0+

ARM architecture

on-chip

Infineon Serial Communication Blocks (SCB) node1

infineon,scb

Clock control

on-chip

Generic fixed-rate clock provider32

infineon,fixed-clock

on-chip

Generic fixed-rate clock provider21

infineon,fixed-factor-clock

on-chip

infineon peripheral divider111

infineon,peri-div

Counter

on-chip

Infineon TCPWM counter5

infineon,tcpwm-counter

DMA

on-chip

Infineon DMAC1

infineon,dmac

Flash controller

on-chip

Infineon CAT1 flash controller1

infineon,flash-controller

GPIO & Headers

on-chip

Infineon GPIO Port25

infineon,gpio

Input

on-board

Group of GPIO-bound input keys1

gpio-keys

Interrupt controller

on-chip

ARMv6-M NVIC (Nested Vectored Interrupt Controller) controller1

arm,v6m-nvic

LED

on-board

Group of GPIO-controlled LEDs1

gpio-leds

MTD

on-chip

Flash node1

soc-nv-flash

Pin control

on-chip

Infineon CAT1 Pinctrl Container1

infineon,pinctrl

PWM

on-chip

Infineon TCPWM PWM5

infineon,tcpwm-pwm

Serial controller

on-chip

Infineon CAT1 UART1

infineon,uart

SRAM

on-chip

Infineon PSOC4 HVMS on-chip SRAM1

infineon,psoc4hvms-sram

Timer

on-chip

ARMv6-M System Tick1

arm,armv6m-systick

on-chip

Infineon TCPWM Timer5

infineon,tcpwm

Watchdog

on-chip

Infineon CAT1 Watchdog1

infineon,watchdog

Connections and IOs

LEDs

Name

GPIO Pin

LED6

P0.7 (active high)

LED7

P0.6 (active high)

Buttons

Name

GPIO Pin

SW5

P5.5 (active low)

Default Zephyr Peripheral Mapping

Pin

Function

Usage

P5.0

SCB1 UART TX

Console TX

P5.1

SCB1 UART RX

Console RX

P0.7

GPIO

LED6

P0.6

GPIO

LED7

P5.5

GPIO

SW5

System Clock

The PSOC™ 4 HVMS 64K uses the Internal Main Oscillator (IMO) as the default system clock source. The clock path is:

  • IMO (Internal Main Oscillator): 48 MHz

  • CLK_HF: 48 MHz (system clock)

SRAM ECC

The PSOC™ 4 HVMS 64K SRAM has error correction and detection (ECC). In Zephyr the SRAM ECC is disabled by default: it is turned off early during reset, so uninitialized SRAM can be read without raising a fault.

To enable the SRAM ECC, set the infineon,sram-ecc property on the sram0 node, for example in an application devicetree overlay:

&sram0 {
    infineon,sram-ecc;
};

and pass the overlay to the build:

west build -b kit_psoc4_hvms_64k_lite samples/hello_world -- -DEXTRA_DTC_OVERLAY_FILE=ecc.overlay

With the ECC enabled, the whole SRAM is written at reset to generate valid ECC. This is skipped after a reset that preserves the SRAM (for example a watchdog reset), so .noinit data survives such a reset. After a power-on or a supply loss the whole SRAM is always initialized.

Serial Port

The PSOC™ 4 HVMS 64K has two SCB (Serial Communication Block) interfaces that can be configured as UART, SPI, or I2C. The Zephyr console output is assigned to SCB1 (uart1), which is routed through the KitProg3 USB-UART bridge.

Default communication settings are 115200 8N1.

Building

Here is an example for the Hello World application.

# From the root of the zephyr repository
west build -b kit_psoc4_hvms_64k_lite samples/hello_world

Programming and Debugging

The kit_psoc4_hvms_64k_lite board supports the runners and associated west commands listed below.

flash debug rtt attach debugserver
openocd ✅ (default) ✅ (default) ✅ ✅ ✅

The KIT_PSOC4-HVMS-64K_LITE includes an onboard programmer/debugger (KitProg3) which can be used to program and debug the PSOC™ 4 HVMS 64K Cortex-M0+ core.

Infineon OpenOCD Installation

The ModusToolbox™ Programming Tools package includes Infineon OpenOCD. Alternatively, a standalone installation can be done by downloading the Infineon OpenOCD release for your system and extracting the files to a location of your choice.

Note

Linux requires device access rights to be set up for KitProg3. This is handled automatically by the ModusToolbox™ Programming Tools installation. When doing a standalone OpenOCD installation, this can be done manually by executing the script openocd/udev_rules/install_rules.sh.

Configuring a Console

Connect a USB cable from your PC to the KitProg3 USB Micro-B connector on the KIT_PSOC4-HVMS-64K_LITE. Use the serial terminal of your choice (minicom, PuTTY, etc.) with the following settings:

  • Speed: 115200

  • Data: 8 bits

  • Parity: None

  • Stop bits: 1

Flashing

One time, set the Infineon OpenOCD path:

west config build.cmake-args -- "-DOPENOCD=path/to/infineon/openocd/bin/openocd.exe"

Build and flash the application:

west build -b kit_psoc4_hvms_64k_lite -p always samples/hello_world
west flash

You should see the following message on the console:

*** Booting Zephyr OS build vX.Y.Z ***
Hello World! kit_psoc4_hvms_64k_lite

Debugging

# From the root of the zephyr repository
west build -b kit_psoc4_hvms_64k_lite samples/hello_world
west debug

Once the GDB console starts, you may set breakpoints and perform standard GDB debugging on the PSOC™ 4 HVMS 64K Cortex-M0+ core.

References