MCX-N5XX-EVK
Overview
The MCX-N5XX-EVK is very similar to the MCX-N9XX-EVK board, please see that page for instructions. The main difference is that this board has an MCXN547 instead of an MCXN947.
For more information about the MCX-N547 SOC and MCX-N5XX-EVK board, see:
Supported Features
The mcx_n5xx_evk board supports the hardware features listed below.
- on-chip / on-board
- Feature integrated in the SoC / present on the board.
- 2 / 2
-
Number of instances that are enabled / disabled.
Click on the label to see the first instance of this feature in the board/SoC DTS files. -
vnd,foo -
Compatible string for the Devicetree binding matching the feature.
Click on the link to view the binding documentation.
mcx_n5xx_evk/mcxn547/cpu0 target
On-target memory for this board target: 320 KiB of RAM, 2 MiB of Flash.
Type |
Location |
Description |
Compatible |
|---|---|---|---|
CPU |
on-chip |
ARM Cortex-M33F CPU1 |
|
ADC |
on-chip |
||
Audio |
on-board |
Dialog DA7212 audio codec1 |
|
on-chip |
NXP PDM Microphone Interface (MICFIL)1 |
||
CAN |
on-chip |
NXP FlexCAN CANFD controller1 |
|
Clock control |
on-chip |
LPC SYSCON & CLKCTL IP node1 |
|
Clock monitor |
on-chip |
NXP Frequency Measurement (FREQME) module1 |
|
Comparator |
on-chip |
NXP Low Power Comparator (LPCMP)2 |
|
Counter |
on-chip |
||
on-chip |
NXP Multirate Timer1 |
||
on-chip |
|||
on-chip |
NXP LPTMR2 |
||
CRC |
on-chip |
NXP CRC device1 |
|
Cryptographic accelerator |
on-chip |
NXP EdgeLock Secure Subsystem1 |
|
DAC |
on-chip |
NXP MCUX LPDAC1 |
|
DMA |
on-chip |
NXP SmartDMA controller1 |
|
on-chip |
|||
DSP |
on-chip |
NXP PowerQuad DSP coprocessor1 |
|
EDAC |
on-chip |
NXP Error Injection Module1 |
|
on-chip |
NXP Error Reporting Module1 |
||
Ethernet |
on-chip |
NXP ENET QOS Ethernet Controller1 |
|
on-chip |
Synopsys DesignWare MAC PTP (Precision Time Protocol) Clock1 |
||
on-chip |
Synopsys DesignWare MAC MDIO controller1 |
||
on-board |
Generic MII PHY1 |
||
Flash controller |
on-chip |
NXP MSF1 Flash Memory Module (FMU)1 |
|
GPIO & Headers |
on-chip |
||
on-board |
GPIO pins exposed on NXP LCD 8080 interface (e.g., used on LCD-PAR-035 panel)1 |
||
Hardware information |
on-chip |
NXP LPC 128-bit Unique identifier1 |
|
Hardware spinlock |
on-chip |
NXP SEMA42 hardware semaphore controller1 |
|
I2C |
on-chip |
||
I2S |
on-chip |
||
I3C |
on-chip |
||
Input |
on-chip |
NXP TSI V6 Touch Sensing Input Device1 |
|
on-board |
Group of GPIO-bound input keys1 |
||
Interrupt controller |
on-chip |
ARMv8-M NVIC (Nested Vectored Interrupt Controller)1 |
|
LED |
on-board |
Group of GPIO-controlled LEDs1 |
|
on-board |
Group of PWM-controlled LEDs1 |
||
Mailbox |
on-chip |
NXP Mailbox Unit as Zephyr MBOX1 |
|
Multi-Function Device |
on-chip |
||
MIPI-DBI |
on-chip |
NXP FlexIO LCD controller1 |
|
Miscellaneous |
on-chip |
NXP FlexIO controller1 |
|
MMU / MPU |
on-chip |
ARMv8-M MPU (Memory Protection Unit)1 |
|
MTD |
on-chip |
Flash node2 |
|
on-board |
NXP FlexSPI NOR1 |
||
MUX |
on-chip |
NXP INPUTMUX peripheral binding1 |
|
OTP memory |
on-chip |
NXP OTPC eFuse controller1 |
|
Pin control |
on-chip |
NXP PORT Pin Controller6 |
|
on-chip |
NXP PORT Pin Controller1 |
||
Power management |
on-chip |
NXP System Power Control (SPC)1 |
|
on-chip |
NXP Core Mode Controller (CMC)1 |
||
on-chip |
NXP Smart Power Switch (VBAT)1 |
||
Power domain |
on-chip |
This power domain will Turn On and Off devices when transitioning in and out a specified Power State1 |
|
PWM |
on-chip |
NXP SCTimer PWM1 |
|
on-chip |
NXP eFLEX PWM module with mcux-pwm submodules1 |
||
on-chip |
|||
Regulator |
on-chip |
NXP VREF SOC peripheral1 |
|
Reset controller |
on-chip |
LPC SYSCON Peripheral reset controller1 |
|
RNG |
on-chip |
NXP EdgeLock Secure Subsystem TRNG1 |
|
RTC |
on-chip |
IRTC1 |
|
SDHC |
on-chip |
NXP imx USDHC controller1 |
|
Sensors |
on-chip |
NXP MCUX QDC2 |
|
Serial controller |
on-chip |
||
SPI |
on-chip |
||
on-chip |
NXP FlexSPI controller1 |
||
SRAM |
on-chip |
Generic on-chip SRAM3 |
|
Timer |
on-chip |
ARMv8-M System Tick1 |
|
on-chip |
NXP OS Timer on i.MX-RT5xx/6xx1 |
||
USB |
on-chip |
NPX Kinetis USBFSOTG Controller in device mode1 |
|
on-chip |
NXP USB High Speed PHY1 |
||
on-chip |
NXP EHCI USB device mode1 |
||
Watchdog |
on-chip |
LPC Windowed Watchdog Timer1 |
|
on-chip |
NXP External Watchdog Monitor1 |
||
Wakeup Controller |
on-chip |
NXP Wakeup Unit (WUU) acting as a Wakeup Controller (WUC)1 |
mcx_n5xx_evk/mcxn547/cpu0/ns target
On-target memory for this board target: 128 KiB of RAM, 2 MiB of Flash.
Type |
Location |
Description |
Compatible |
|---|---|---|---|
CPU |
on-chip |
ARM Cortex-M33F CPU1 |
|
ADC |
on-chip |
||
Audio |
on-board |
Dialog DA7212 audio codec1 |
|
on-chip |
NXP PDM Microphone Interface (MICFIL)1 |
||
CAN |
on-chip |
NXP FlexCAN CANFD controller1 |
|
Clock control |
on-chip |
LPC SYSCON & CLKCTL IP node1 |
|
Clock monitor |
on-chip |
NXP Frequency Measurement (FREQME) module1 |
|
Comparator |
on-chip |
NXP Low Power Comparator (LPCMP)2 |
|
Counter |
on-chip |
||
on-chip |
NXP Multirate Timer1 |
||
on-chip |
|||
on-chip |
NXP LPTMR2 |
||
CRC |
on-chip |
NXP CRC device1 |
|
Cryptographic accelerator |
on-chip |
NXP EdgeLock Secure Subsystem1 |
|
DAC |
on-chip |
NXP MCUX LPDAC1 |
|
DMA |
on-chip |
NXP SmartDMA controller1 |
|
on-chip |
|||
DSP |
on-chip |
NXP PowerQuad DSP coprocessor1 |
|
EDAC |
on-chip |
NXP Error Injection Module1 |
|
on-chip |
NXP Error Reporting Module1 |
||
Ethernet |
on-chip |
NXP ENET QOS Ethernet Controller1 |
|
on-chip |
Synopsys DesignWare MAC PTP (Precision Time Protocol) Clock1 |
||
on-chip |
Synopsys DesignWare MAC MDIO controller1 |
||
on-board |
Generic MII PHY1 |
||
Flash controller |
on-chip |
NXP MSF1 Flash Memory Module (FMU)1 |
|
GPIO & Headers |
on-chip |
||
on-board |
GPIO pins exposed on NXP LCD 8080 interface (e.g., used on LCD-PAR-035 panel)1 |
||
Hardware information |
on-chip |
NXP LPC 128-bit Unique identifier1 |
|
Hardware spinlock |
on-chip |
NXP SEMA42 hardware semaphore controller1 |
|
I2C |
on-chip |
||
I2S |
on-chip |
||
I3C |
on-chip |
||
Input |
on-chip |
NXP TSI V6 Touch Sensing Input Device1 |
|
on-board |
Group of GPIO-bound input keys1 |
||
Interrupt controller |
on-chip |
ARMv8-M NVIC (Nested Vectored Interrupt Controller)1 |
|
LED |
on-board |
Group of GPIO-controlled LEDs1 |
|
on-board |
Group of PWM-controlled LEDs1 |
||
Mailbox |
on-chip |
NXP Mailbox Unit as Zephyr MBOX1 |
|
Multi-Function Device |
on-chip |
||
MIPI-DBI |
on-chip |
NXP FlexIO LCD controller1 |
|
Miscellaneous |
on-chip |
NXP FlexIO controller1 |
|
MMU / MPU |
on-chip |
ARMv8-M MPU (Memory Protection Unit)1 |
|
MTD |
on-chip |
Flash node2 |
|
on-board |
NXP FlexSPI NOR1 |
||
MUX |
on-chip |
NXP INPUTMUX peripheral binding1 |
|
OTP memory |
on-chip |
NXP OTPC eFuse controller1 |
|
Pin control |
on-chip |
NXP PORT Pin Controller6 |
|
on-chip |
NXP PORT Pin Controller1 |
||
Power management |
on-chip |
NXP System Power Control (SPC)1 |
|
on-chip |
NXP Core Mode Controller (CMC)1 |
||
on-chip |
NXP Smart Power Switch (VBAT)1 |
||
Power domain |
on-chip |
This power domain will Turn On and Off devices when transitioning in and out a specified Power State1 |
|
PWM |
on-chip |
NXP SCTimer PWM1 |
|
on-chip |
NXP eFLEX PWM module with mcux-pwm submodules1 |
||
on-chip |
|||
Regulator |
on-chip |
NXP VREF SOC peripheral1 |
|
Reset controller |
on-chip |
LPC SYSCON Peripheral reset controller1 |
|
RNG |
on-chip |
NXP EdgeLock Secure Subsystem TRNG1 |
|
RTC |
on-chip |
IRTC1 |
|
SDHC |
on-chip |
NXP imx USDHC controller1 |
|
Sensors |
on-chip |
NXP MCUX QDC2 |
|
Serial controller |
on-chip |
||
SPI |
on-chip |
||
on-chip |
NXP FlexSPI controller1 |
||
SRAM |
on-chip |
Generic on-chip SRAM3 |
|
Timer |
on-chip |
ARMv8-M System Tick1 |
|
on-chip |
NXP OS Timer on i.MX-RT5xx/6xx1 |
||
USB |
on-chip |
NPX Kinetis USBFSOTG Controller in device mode1 |
|
on-chip |
NXP USB High Speed PHY1 |
||
on-chip |
NXP EHCI USB device mode1 |
||
Watchdog |
on-chip |
LPC Windowed Watchdog Timer1 |
|
on-chip |
NXP External Watchdog Monitor1 |
||
Wakeup Controller |
on-chip |
NXP Wakeup Unit (WUU) acting as a Wakeup Controller (WUC)1 |
mcx_n5xx_evk/mcxn547/cpu1 target
On-target memory for this board target: 64 KiB of RAM, 2 MiB of Flash.
Type |
Location |
Description |
Compatible |
|---|---|---|---|
CPU |
on-chip |
ARM Cortex-M33 CPU1 |
|
ADC |
on-chip |
LPC LPADC2 |
|
Audio |
on-chip |
NXP PDM Microphone Interface (MICFIL)1 |
|
CAN |
on-chip |
NXP FlexCAN CANFD controller1 |
|
Clock control |
on-chip |
LPC SYSCON & CLKCTL IP node1 |
|
Clock monitor |
on-chip |
NXP Frequency Measurement (FREQME) module1 |
|
Comparator |
on-chip |
NXP Low Power Comparator (LPCMP)2 |
|
Counter |
on-chip |
NXP MCUX Standard Timer/Counter5 |
|
on-chip |
NXP Multirate Timer1 |
||
on-chip |
NXP Multirate Timer Channel4 |
||
on-chip |
NXP LPTMR2 |
||
CRC |
on-chip |
NXP CRC device1 |
|
Cryptographic accelerator |
on-chip |
NXP EdgeLock Secure Subsystem1 |
|
DAC |
on-chip |
NXP MCUX LPDAC1 |
|
DMA |
on-chip |
NXP SmartDMA controller1 |
|
on-chip |
|||
DSP |
on-chip |
NXP PowerQuad DSP coprocessor1 |
|
EDAC |
on-chip |
NXP Error Injection Module1 |
|
on-chip |
NXP Error Reporting Module1 |
||
Ethernet |
on-chip |
NXP ENET QOS Ethernet Controller1 |
|
on-chip |
Synopsys DesignWare MAC PTP (Precision Time Protocol) Clock1 |
||
on-chip |
Synopsys DesignWare MAC MDIO controller1 |
||
on-board |
Generic MII PHY1 |
||
Flash controller |
on-chip |
NXP MSF1 Flash Memory Module (FMU)1 |
|
GPIO & Headers |
on-chip |
||
on-board |
GPIO pins exposed on NXP LCD 8080 interface (e.g., used on LCD-PAR-035 panel)1 |
||
Hardware information |
on-chip |
NXP LPC 128-bit Unique identifier1 |
|
Hardware spinlock |
on-chip |
NXP SEMA42 hardware semaphore controller1 |
|
I2C |
on-chip |
NXP LPI2C controller10 |
|
I2S |
on-chip |
NXP mcux SAI-I2S controller2 |
|
I3C |
on-chip |
NXP MCUX I3C controller2 |
|
Input |
on-chip |
NXP TSI V6 Touch Sensing Input Device1 |
|
on-board |
Group of GPIO-bound input keys1 |
||
Interrupt controller |
on-chip |
ARMv8-M NVIC (Nested Vectored Interrupt Controller)1 |
|
LED |
on-board |
Group of GPIO-controlled LEDs1 |
|
on-board |
Group of PWM-controlled LEDs1 |
||
Mailbox |
on-chip |
NXP Mailbox Unit as Zephyr MBOX1 |
|
Multi-Function Device |
on-chip |
||
MIPI-DBI |
on-chip |
NXP FlexIO LCD controller1 |
|
Miscellaneous |
on-chip |
NXP FlexIO controller1 |
|
MTD |
on-chip |
Flash node2 |
|
on-board |
NXP FlexSPI NOR1 |
||
MUX |
on-chip |
NXP INPUTMUX peripheral binding1 |
|
OTP memory |
on-chip |
NXP OTPC eFuse controller1 |
|
Pin control |
on-chip |
NXP PORT Pin Controller6 |
|
on-chip |
NXP PORT Pin Controller1 |
||
Power management |
on-chip |
NXP System Power Control (SPC)1 |
|
on-chip |
NXP Core Mode Controller (CMC)1 |
||
on-chip |
NXP Smart Power Switch (VBAT)1 |
||
Power domain |
on-chip |
This power domain will Turn On and Off devices when transitioning in and out a specified Power State1 |
|
PWM |
on-chip |
NXP SCTimer PWM1 |
|
on-chip |
NXP eFLEX PWM module with mcux-pwm submodules1 |
||
on-chip |
NXP MCUX PWM4 |
||
Regulator |
on-chip |
NXP VREF SOC peripheral1 |
|
Reset controller |
on-chip |
LPC SYSCON Peripheral reset controller1 |
|
RNG |
on-chip |
NXP EdgeLock Secure Subsystem TRNG1 |
|
RTC |
on-chip |
IRTC1 |
|
SDHC |
on-chip |
NXP imx USDHC controller1 |
|
Sensors |
on-chip |
NXP MCUX QDC2 |
|
Serial controller |
on-chip |
||
SPI |
on-chip |
NXP LPSPI controller10 |
|
on-chip |
NXP FlexSPI controller1 |
||
SRAM |
on-chip |
Generic on-chip SRAM3 |
|
Timer |
on-chip |
ARMv8-M System Tick1 |
|
on-chip |
NXP OS Timer on i.MX-RT5xx/6xx1 |
||
USB |
on-chip |
NPX Kinetis USBFSOTG Controller in device mode1 |
|
on-chip |
NXP USB High Speed PHY1 |
||
on-chip |
NXP EHCI USB device mode1 |
||
Watchdog |
on-chip |
LPC Windowed Watchdog Timer1 |
|
on-chip |
NXP External Watchdog Monitor1 |
||
Wakeup Controller |
on-chip |
NXP Wakeup Unit (WUU) acting as a Wakeup Controller (WUC)1 |
Power Management
Enable CONFIG_PM to use System Power Management. The SoC PM hooks
implement the following state mapping:
Zephyr state |
NXP power mode |
Availability |
|---|---|---|
|
Sleep |
Available with |
|
Deep Sleep |
Available with |
|
Power Down |
Available with |
|
Deep Power Down |
Disabled by default in the SoC devicetree |
The PM policy chooses among enabled states according to the expected idle duration, latency constraints, and power-state locks. The devicetree residency and exit-latency values are configuration defaults, not measured guarantees for every application.
Wakeup and Timekeeping
When SysTick is the kernel timer, it stops while the core clock is gated.
The board selects LPTMR0 through zephyr,system-timer-companion to keep time
and provide timed wakeups. Keep the companion timer enabled and use a clock
source that operates in the intended power mode. Other kernel timer
configurations must also provide timekeeping and wakeups across that mode.
The wakeup-button alias describes a button’s wakeup-ctrls connection to
the WUU. The alias alone does not arm a wakeup: enable the source through the
WUC API before entering low power. The button and WUU pin are
listed below.
Deep Power Down
Suspend-to-RAM is opt-in. Before enabling the deeppowerdown devicetree node
in an application overlay, place the entire retained working set, including
stacks, kernel objects, and saved CPU context, in RAM that survives this mode
and arm a wakeup source. Enabling the node with CONFIG_PM also enables
CONFIG_PM_S2RAM when supported by the architecture.
The NXP MCX suspend-to-RAM sample provides timer and button wakeup
configurations and board-specific memory layouts.
Deep Power Down resets the CORE domain and its peripheral register blocks.
Applications relying on peripheral recovery must enable
CONFIG_PM_DEVICE and the required power-domain support, and use drivers that restore their hardware after power
loss. System-managed device PM and
runtime device PM are separate mechanisms;
CONFIG_PM alone does not ensure peripheral recovery.
With CONFIG_POWEROFF, system off also enters Deep Power Down,
but wakeup starts through the reset path rather than resuming the suspended
application. See NXP MCX system off.
Debugging and Validation
Use CONFIG_SOC_FAMILY_MCXA_DEBUG_IN_LOW_POWER or
CONFIG_SOC_FAMILY_MCXN_DEBUG_IN_LOW_POWER, as appropriate, to
keep debug logic enabled in modes that retain the CORE domain, at the cost of
higher low-power current. Deep Power Down loses the debug connection regardless
of this option.
The tests/subsys/pm/power_mgmt_soc test covers the targets in its platform allow list. Its default configuration does not enable Deep Power Down. Validate the optional state with the S2RAM sample, then verify wakeup and peripheral operation with the application’s own configuration. A sample or test target listing is not evidence of measured power consumption.
Board-specific Requirements
CPU1 does not support independent system power management.
The wakeup-button alias selects SW2 on P1_3, routed to WUU external pin 7
with a falling-edge interrupt.
Only SRAMA, the first 32 KB at 0x20000000, survives Deep Power Down through
the VBAT RAM LDO. The samples/boards/nxp/mcxn_a/s2ram/mcxn.overlay
limits zephyr,sram to the 24 KB at 0x20002000 to avoid the boot ROM’s
scratch area. The default CPU0 RAM allocation is not a suspend-to-RAM layout;
check that the entire retained working set fits before enabling this state.