X-STM32MP-MSP01

Overview

The X-STM32MP-MSP01 is a multisensor evaluation board that embeds motion MEMS, environmental, ambient light and Time-of-Flight sensors, a digital microphone, and an NFC tag. This board works with the STM32MPU discovery kit. It can be used with the X-LINUX-MSP1 to read the sensors. The X-STM32MP-MSP01 main devices are the ISM330DHCX 3-axis accelerometer and gyroscope, the IIS2MDC 3-axis magnetometer, and the LPS22HH MEMS nano pressure sensor.

The board also includes the STTS22H digital temperature sensor, the VD6283TX ambient light sensor, the IIS2DLPC 3-axis accelerometer, the VL53L5CX multizone ranging sensor, and the MP23DB02MM digital MEMS microphone. The on-board dynamic NFC/RFID tag IC can work with a dual interface for the I2C, through a 13.56 MHz RFID reader, or via an NFC phone.

The X-STM32MP-MSP01 interfaces with the STM32MP1Dev via a 40-pin GPIO connector pins using I2C, SPI, and general GPIO pins. It is compatible with STM32MP135F-DK, STM32MP157F-DK2 and a Raspberry Pi GPIO connector layout.

X-STM32MP-MSP01

More information about the board can be found at the X-STM32MP-MSP01 website [1].

Hardware Description

X-STM32MP-MSP01 provides the following key features:

  • Included sensors:

    • ISM330DHCX: 3-axis accelerometer and 3-axis gyroscope

    • IIS2MDC: 3-axis digital magnetometer

    • IIS2DLPC: 3-axis accelerometer for industrial applications

    • STTS22H: digital temperature sensor

    • LPS22HH: nano pressure sensor

    • VD6283TX: ambient light sensor

    • VL53L5CX: Time-of-Flight (ToF) multizone ranging sensor

  • Dynamic NFC/RFID tag

  • Digital microphone

  • Standard DIL 24 pin socket for adapter boards

  • Compatible with STM32MP135F-DK, STM32MP157F-DK2 and Raspberry Pi

Programming

Set --shield x_stm32mp_msp01 when you invoke west build. For example when running the Sensor shell sample:

# From the root of the zephyr repository
west build -b stm32mp135f_dk --shield x_stm32mp_msp01 samples/sensor/sensor_shell

References